This patch refactors static cache invalidation of images by tracking an
update count. Images now store a runtime update count that is updated
every time the image is tagged for update. Cached images store a copy of
the update count at the moment they were cached, and are invalidated if
if it changed.
Compared to #134878, this is simpler and more robust, since update IDs
are isolated to images only and not to the DEG update count. Though this
only supports images specifically because they are not covered by the
copy-on-evaluation system, which means #134878 will cause multiple
depsgraph to fight over images.
Pull Request: https://projects.blender.org/blender/blender/pulls/134905
Replace `bNodeInstanceHash` with a `Map`. Move it to the node tree
runtime data. Simplify some code by removing the tag from the hash
value and collecting unused previews directly. Then just remove a
bunch of code that's now unused.
Note that texture node previews haven't been working for a while
anyway, and the experimental shader node previews seem to use
a different system (this one is a remnant of Blender Internal).
Pull Request: https://projects.blender.org/blender/blender/pulls/135310
The line-width is used to calculate the `U.pixelsize` which should only
be used to control the size of lines & points.
Update doc-strings to mention the intended use, remove unused defines.
Adds the option to create a boolean socket that can be used as a panel toggle.
This allows creating simpler and more compact node group UIs when a panel
can be "disabled".
The toggle input is a normal input socket that is just drawn a bit differently in
the UI. Whether a boolean is a toggle input or not does not affect evaluation.
Also see #133936 for guides on how to add and remove panel toggles.
Pull Request: https://projects.blender.org/blender/blender/pulls/133936
Remove GP legacy obtype and unused functions
Few hidden bugs are fixed with that:
- Outliner drag-drop for GP material/effect elements now works
- Correct stats are shown in status bar.
Pull Request: https://projects.blender.org/blender/blender/pulls/133957
This shared state between original data and depsgraphs was added in
98a0bcd425. Other physics systems also share
the pointcache, but not the simulation state to this extent, which leads
to this kind of crash.
The mutex lock is not a great solution, you don't really want both render and viewport to be filling the same cache in parallel. However
this kind of problem also exists in other physics systems, and solving
that is certainly beyond the scope of 4.4, and probably needs to wait
for a bigger physics rewrite. In general the recommendation is to bake
everything before rendering.
Pull Request: https://projects.blender.org/blender/blender/pulls/134779
In the past, around the time that 2.80 was released, 4a08b974f4
introduced the idea of filtering out certain editor changes inside
the paint modes and edit mode (e.g. changing brush sizes in the editor).
This commit is the first in a series to attempt to refine this behavior
so that only certain editor settings are filtered out from the undo
stack.
In total, it does the following:
* Adds the Brush datablock to the list of IDs that do not have undo
pushes.
* Adds support to filter out RNA structs that do not have the
`STRUCT_UNDO` property applied (currently, just the 3D Cursor).
This has the following effects:
* Changing brush settings inside the Image Editor no longer causes
undo pushes, becoming consistent with the other paint modes.
* Changing brush settings while in object mode in the outliner data
block view no longer causes undo pushes.
Co-authored-by: Campbell Barton <campbell@blender.org>
With the brush assets project, brushes were moved from being local to
the working blendfile to being linked from asset libraries. This breaks
the Image Paint 'Clone' brush, as it has a brush property that links to
other Image datablocks.
To support this functionality, this commit adds the corresponding
properties into the `ImagePaintSettings` struct so that it is stored
locally with the images that will be used by the tool, inside the main
blendfile.
The source image property is shared with the 3D version of the 'Clone'
brush instead of adding a separate field to preserve old behavior.
Notably, this has the following limitations:
* If clone brush assets have been made and shared with external packs,
they would not work out of the box with linked image assets.
* Despite these settings being stored on the scene, they are populated
inside the tool window under "Brush Settings" which is potentially
misleading. However, this is already the case for the 3D version of
the brush, so further UI refinement will happen outside of this PR.
* Users will be unable to use separate images simultaneously for the
Image editor and the 3D viewport, unlike in pre-4.3 versions. This
can be adjusted in the future if it is a critical workflow.
Because the intended design and functionality of this tool is currently
questionable, this commit opts to make these changes instead of doing
further design to support both accessing data on the brush and on the
scene.
Pull Request: https://projects.blender.org/blender/blender/pulls/134474
Though "Point Cloud" written as two words is technically correct and should be used in the UI, as one word it's typically easier to write and parse when reading. We had a mix of both before this patch, so better to unify this as well.
This commit also renames the editor/intern/ files to remove pointcloud_ prefix.
point_cloud was only preserved on the user facing strings:
* is_type_point_cloud
* use_new_point_cloud_type
Pull Request: https://projects.blender.org/blender/blender/pulls/134803
This reverts commit afec64739a.
The commit introduces a regression where opening the Asset Browser opens
the File Browser instead, same for other editor sub-types, see
blender/blender#134630.
blender/blender!134642 proposes a different solution and reverts this,
which I prefer too. Better to the revert separately from trying a
different fix for the initial bug, makes reviewing easier too.
This implements the memorization of the previous state of a space's
subtype for those that have multiple modes. Introduces an optional
space_subtype_prev_get callback, implemented for SPACE_ACTION,
SPACE_FILE, SPACE_GRAPH, SPACE_IMAGE and SPACE_NODE. This means we
can always return to the previous mode.
Pull Request: https://projects.blender.org/blender/blender/pulls/133846
Collapsing curves to a single point when just resampling is unexpected. This
patch changes it so that non-zero-length curves keep at least one segment.
The fix is fairly straight forward, but a bunch of additional code is added to
support the legacy option to avoid breaking backward compatibility.
Pull Request: https://projects.blender.org/blender/blender/pulls/133659
The "Red Alert" color is currently hard-coded, which causes problems in
themes. It also has an Enum value of 0, which precludes using this
value as "unset". We also use Error, Warning, and Info colors that are
part of the Info Editor. This PR moves these out of the Info Editor
and into the "State" part of the theme. And then makes TH_REDALERT use
the TH_ERROR color.
Pull Request: https://projects.blender.org/blender/blender/pulls/131127
This replaces the `set_listbasepointers` function with `BKE_main_lists_get`
which returns an array of `ListBase *`. This simplifies the caller a bit. In
some cases, it can be simplifed further by changing the order in which we iterate
over the listbase. For historical reasons, we iterate from the back to front in
most cases but sometimes the order does not matter. I did keep the iteration order
in this patch though, to avoid regressions.
Pull Request: https://projects.blender.org/blender/blender/pulls/134242
f0db870822 added support for tree-views to remember state, but only to
remember their custom height for the start. This change makes the scroll
offset be remembered too.
Not remembering the scroll offset can be very annoying in some cases,
e.g. when working with bone collections and changing the active tab in
the properties editor often. In realistic, non-trivial bone collection
set ups this can lead to a lot of repeated scrolling.
Cherry-picked for the 4.4 release since this solves a real usability
issue with trivial changes. Discussed with Thomas and others.
f0db870822 added support for tree-views to remember state, but only to
remember their custom height for the start. This change makes the scroll
offset be remembered too.
Not remembering the scroll offset can be very annoying in some cases,
e.g. when working with bone collections and changing the active tab in
the properties editor often. In realistic, non-trivial bone collection
set ups this can lead to a lot of repeated scrolling.
This would be done when the frame, layer, pass or view changes compared to
the previous value. But for cases like old files without these members or
loading the image datablock into a different scene, this considered the image
to be always be changed on file load.
Now always reset this state on file load, and don't consider the initial
state as an image update.
This could also happen in the middle of GPU rendering, causing the GPU
texture to be freed while still in use.
Pull Request: https://projects.blender.org/blender/blender/pulls/134198
Move `Library.runtime` to be a pointer, move the related
`LibraryRuntime` struct to `BKE_library.hh`. Similar to e.g.
Mesh.runtime, that pointer is expected to always be valid, and is
allocated at readtime or when creating a new Library ID.
Related smaller changes:
* Write code now uses standard ID writing codepath for Library IDs too.
* Runtime pointer is reset to nullptr before writing.
* Looking up a library by its absolute path is now handled through a
dedicated utils, `search_filepath_abs`, instead of using
`BLI_findstring`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134188
Note: this is a back-port from `main`, details below,
Original message:
Add support for dynamic NDOF orbit center calculation.
- When "Auto" NDOF preference is enabled:
All visible objects in the viewport are used to calculate a
bounding box center, if the bounds are outside the view or the center
is behind the viewport, use a Z-Buffer test to calculate the depth in
the middle of the region.
- When "Use Selected Items" NDOF preferences is enabled,
calculating the bounds from the selection.
- An option to show the orbit center as a guide has also been added.
Ref !129594
Co-authored-by: Kamil Galik <kgalik@3dconnexion.com>
Back-ported as this change as this only missed the 4.4 branch by hours
and is considered an important feature for 4.4 by 3dconnexion.
This includes the following commits from main:
1a14d6949830399fd1653a8658958fda8d9d989e2a0ce11104fb539baa89
This patch introduces the `Plane` brush, a generalization of the
existing `Flatten`, `Fill` and `Scrape` brushes, with the objective of
providing more flexibility when sculpting.
This brush has the following key features:
* `Height` and `Depth` parameters to control the range of the brush in
the local z-axis.
* Stabilizers for the normal and center of the brush plane.
When inverting, the user can choose between two options:
* `Invert Displacement`: Identical to the existing behavior, displacing
vertices away from the plane.
* `Swap Height and Depth`: Exchanges the roles of `Height` and `Depth`.
For example a brush with `Height` = 0.7 and `Depth` = 0.3 behaves as
if it had `Height` = 0.3 and `Depth` = 0.7. In particular, this
ensures that a scrape brush (`Height` = 1, `Depth` = 0) becomes
equivalent to a fill brush (`Height` = 0, `Depth` = 1) when inverted,
and viceversa.
In the existing planar brushes, the influence on a vertex is determined
by the 3D Euclidean distance between the vertex and the cursor position,
multiplied by the vertex's distance from the brush plane (and other
factors common to all brushes).
In the `Plane` brush, the 3D distance is between the vertex and the
plane center instead of the cursor position.
The Plane brush introduces two parameters — `Stabilize Normal` and
`Stabilize Plane`. These can be thought of as the non-binary version of
the `Original Normal` and `Original Plane` options found in existing
brushes. These values are a weighted moving average across a window of
previous stroke steps.
Pull Request: https://projects.blender.org/blender/blender/pulls/132723
Also adds a new `BLO_readfile_id_runtime_tags_for_write` accessor to
ensure readfile data is created before assigning a tag value.
Followup to 2ec1b6887d. Should cover the last existing ID tags that
can be moved to temp runtime readfile ID data.
This reverts commit aff2cf97a1, and re-apply 2612b27e42 fix the issue
fixed.
Grease Pencil layers can only be duplicated on the same object. Duplicating layers
from other objects will not insert the drawings into the target object and just
assume that drawing indices remain valid, which is not the case. The subsequent
drawing index user update crashes Blender.
This fix adds a new `copy_frames_from_layer` function that makes a full copy
of layer data, regardless of where that layer originates from. This is safe to use
with layers that live in other objects.
Pull Request: https://projects.blender.org/blender/blender/pulls/133722
The dolly operators poll function was set to `view3d_rotation_poll`
instead of `view3d_zoom_or_dolly_poll` which reads like a mistake.
As it happens this didn't cause any user visible problems because
RV3D_LOCK_ZOOM_AND_DOLLY is only set when all other locks are set.
Nevertheless, logically the dolly operator should check that dolly
is not locked. Updated the poll function for dolly to check neither
rotation or zoom/dolly is locked with comments noting why both are
needed.
Also expand on code-comments for why dolly enforces perspective view.
Creates a very mysterious crash in nodetree code when using deprecated
'full undo'. Needs more investigation, we need to understand what's
happening here!
This reverts commit 2612b27e42.
Also adds a new `BLO_readfile_id_runtime_tags_for_write` accessor to
ensure readfile data is created before assigning a tag value.
Followup to 2ec1b6887d. Should cover the last existing ID tags that
can be moved to temp runtime readfile ID data.
Pull Request: https://projects.blender.org/blender/blender/pulls/133715
This patch changes how the Wrap option in the Translate node works. It
now repeats infinitely when realized, and not just in its own domain.
This is essentially how it used to work prior to version 4.2, so we are
reverting that change. We also rename Wrap to Repeat for clarity.
This is part of an ongoing to project to allow the user to control how
boundaries and empty areas are filled after transformations. So similar
options will be added to all transform nodes. But this patch is the
first step, since the functionality is already there, we just need to
extend it to work in all domains.
Pull Request: https://projects.blender.org/blender/blender/pulls/133766
Artists often want to quickly switch back and forth between two or more nodes while compositing.
This patch implements two operators `NODE_OT_viewer_shortcut_set` and `NODE_OT_viewer_shortcut_get` that allow users to map a viewer node to a shortcut. For example, pressing `cltr+1` while a node is selected, assigns that node to the shortcut `1`, creates a viewer node if it has none attached and sets that viewer node to active. Pressing `1` will set the active node with shortcut `1` to active.
Shortcuts are saved in DNA to preserve them after saving/loading blend files.
Limitations:
- Only compositor node tree is supported, because shading editor has no viewer node and geometry nodes viewer works differently.
Pull Request: https://projects.blender.org/blender/blender/pulls/123641
