This function returns an array of keyed frames with rounding,
to avoid duplicates caused by subtle floating point difference.
Reviewed By: sybren
Ref D10781
Purely local IDs would not always be used as proper barriers when
generating override hierarchy data, leading to imporperly trying to
resync override IDs from other hierarchies, which would break/cause
issues in case they would be duplicate overrides of the same linked
data.
Reported by Pablo from Sprite team, thanks.
We do not want to re-generate auto-overrides until everything that
needed to be resynced has been resynced. Otherwise it's a waste of time
and guaranteed loss of some override properties.
Mistake in rB9947f2095610 earlier today.
This will allow retrieving the instance groups from multiple geometry
sets and avoiding needing vectors of vectors to store the results.
This is useful when retrieving instances from a multi-input socket
of geometries.
This patch renames two domains:
* `Polygon` -> `Face`
* `Corner` -> `Face Corner`
For the change from `polygon` to `face` I did a "deep rename" where I updated
all (most?) cases where we refere to the attribute domain in code as well.
The change from `corner` to `face corner` is only a ui change. I did not see
a real need to update all code the code for that. It does not seem to improve
the code, more on the contrary.
Ref T86818.
Differential Revision: https://developer.blender.org/D10803
CacheFile writing code would not write generic ID data (call for it has
been missing since the initial commit, rB61050f75b13e).
While potentially affecting other areas (mostly CustomProperties/IDProperties),
this was a critical failure for liboverrides. Also added some workaround
code to allow opening broken files (though the override of the CacheFile
data-block will be lost).
This patch adds support to export and import grease pencil in several formats.
Inlude:
* Export SVG
* Export PDF (always from camera view)
* Import SVG
The import and export only support solid colors and not gradients or textures.
Requires libharu and pugixml.
For importing SVG, the NanoSVG lib is used, but this does not require installation (just a .h file embedded in the project folder)
Example of PDF export: https://youtu.be/BMm0KeMJsI4
Reviewed By: #grease_pencil, HooglyBoogly
Maniphest Tasks: T83190, T79875, T83191, T83192
Differential Revision: https://developer.blender.org/D10482
Linked data should only be duplicated if relevant `eDupli_ID_Flags` flag
is set (`USER_DUP_LINKED_ID`), this is being taken care of by generic
`BKE_id_copy_for_duplicate` function, but for some reasons (?)
`BKE_object_duplicate` was directly using `BKE_id_copy` for itself...
Note that this had especially bad consequences when duplicating
overrides of collections...
Currently, when a taper object is specified, the radius of the spline is
ignored. This patch adds a new option to control how the taper object
affect the effective radius of the spline. The option allow three modes
of operation:
- Override: The old method. The radius of the spline is ignored and
overridden.
- Multiply: The radius of the spline is multiplied by the taper radius.
- Add: The radius of the spline is added to the taper radius.
Ref D10779
- Rename:
`BKE_gpencil_object_material_get_index_name`, to
`BKE_gpencil_object_material_index_get_by_name`
Matching `BKE_gpencil_layer_get_by_name`.
- Move logic to ensure named materials into a new function:
`BKE_gpencil_object_material_ensure_by_name`
In this case both the mirror object and object itself moving in time may
change the geometry and must be checked.
Differential Revision: https://developer.blender.org/D10757
The issue was caused by the prefetch code having LOCK_MOVIECLIP lock
acquired while reading frames from the movie files. The need of the
lock was coming from the fact that `clip->anim` can not be accessed
from multiple threads, so that was guarded by a lock. The side effect
of this lock was that the main thread (from which drawing is happening)
did not have any chance passing through it in the cache code because
the prefetch happens so quickly.
The solution is to create a local copy of the clip with its own
anim handler, so that read can happen without such lock.
The prefetch is slower by an absolute number in seconds (within 10%
in tests here), but it is interactive now.
Code rebuilding/ensuring the sanity of the collection hierarchy was not
checking for a same collection being child of the same parent multiple
times.
This was already prevented to happen in code adding collections to other
collections, but not for the remapping case.
In collection/viewlayer synchronization code, in some cases, there are
extra unused view layer collections left in old list after all needed
ones have been moved to the new list.
Found while working on T86741.
Instead of storing those in scne's master collection, which is fairly
annoying, we now add them to a (hidden) specific collection. Easy to
ignore, or check and cleanup.
This patch adds the remaining 6 interpolations for mesh domains.
The new interpolations are:
- Corner / point / polygon to edge
- Edge to corner / point / polygon
After this it is possible to adapt an attribute to and from every
mesh domain. This is simple to test with the "Attribute Convert" node.
Though, as a note for the future, there are still some improvements
possible to the interpolations, like lazily calculating values for the
interpolations where it's possible, and slightly improving the
algorithms used for some interpolations, like using corner angles
for polygon to point.
Differential Revision: https://developer.blender.org/D10765
This is not only potentially extremely expensive, it is also fairly
futile, and code is not designed to handle it currently anyway (could
easily end up in inifinite loops and other crashes).
Allow python access to the `reset_view` functionality which before
was only available through the menu. This was suggested for
consistency after D10561.
Differential Revision: https://developer.blender.org/D10595
Previously even if the input goemetry set had no point cloud or no mesh
instances, `geometry_set_realize_instances` would create empty data.
This isn't necessarily bad, but it can complicate things down the line if
there are a bunch of empty components getting passed around.
Following concerns raised in the commit that changed the name initially,
rB2e19509e60b39837, it makes more sense to keep the "Surface" name for
this node because it has a specific meaning that should not be confused
with other types of subdivision.
This patch adds the ability to mute individual wires in the node editor.
This is invoked like the cut links operator but with a new shortcut.
Mute = Ctrl + Alt
Cut = Ctrl
Dragging over wires will toggle the mute state for that wire.
The muted wires are drawn in red with a bar across the center.
Red is used in the nodes context to indicate invalid links, muted links and internal links.
When a wire is muted it exposes the original node buttons which are normally hidden when a wire is connected.
Downstream and upstream links connected using reroute nodes are also muted.
Outside scope of patch:
- Add support for pynodes e.g. Animation Nodes
- Requires minor change to check for muted links using the `is_muted` link property or the `is_linked` socket property.
Maniphest Tasks: T52659
Differential Revision: https://developer.blender.org/D2807
This commit includes nodes to build the following primitives:
- Cone
- Cylinder
- Circle
- Cube
- UV Sphere
- Ico Sphere
- Line
- Plane/Grid
In general the inputs are the same as the corresponding operators
in the 3D view.
**Line Primitive**
The line primitive has two modes-- adding vertices between two end
points, or adding vertices each at an offset from the start point.
For the former mode, there is a choice between a vertex count
and a distance between each point.
**Plane Primitive**
This commit includes the "Plane" and "Grid" primitives as one node.
Generally primitives are named after the simpler form of the shape they
create (i.e. "Cone" can make some more complex shapes). Also, generally
you want to tweak the number of subdivisions anyway, so defaulting to
plane is not an inconvenience. And generally having fewer redundant
base primitives is better.
**Future Improvements**
A following patch proposes to improve the speed of the cylinder, cone,
and sphere primitives: D10730. Additional possible future improvements
would be adding subdivisions to the cube node and rings to the cone
and cylinder nodes.
Differential Revision: https://developer.blender.org/D10715
This adds the LineArt grease pencil modifier.
It takes objects or collections as input and generates various grease
pencil lines from these objects with the help of the active scene
camera. For example it can generate contour lines, intersection lines
and crease lines to name a few.
This is really useful as artists can then use 3D meshes to automatically
generate grease pencil lines for characters, enviroments or other
visualization purposes.
These lines can then be baked and edited as regular grease pencil lines.
Reviewed By: Sebastian Parborg, Antonio Vazquez, Matias Mendiola
Differential Revision: http://developer.blender.org/D8758
Problem is, when a collection is excluded from the scene, none of its
objects are technically instantiated.
This should not happen when *creating* an override, but can be fairly
common during resync process.
For now, use a lesser precise check in resync case, only relying on
object usercount. This might lead to some objects being left without any
collection in some rare weird case, but this cannot really be avoided
currently.
Seems like one of the example files on the cryptomatte github is
malformed and blender crashes when loading that file. This change will
try to load as much as possible from the manifest so it can still be
used.
This has also been reported to cryptomatte project.
In the current implementation, cryptomatte passes are connected to the node
and elements are picked by using the eyedropper tool on a special pick channel.
This design has two disadvantages - both connecting all passes individually
and always having to switch to the picker channel are tedious.
With the new design, the user selects the RenderLayer or Image from which the
Cryptomatte layers are directly loaded (the type of pass is determined by an
enum). This allows the node to automatically detect all relevant passes.
Then, when using the eyedropper tool, the operator looks up the selected
coordinates from the picked Image, Node backdrop or Clip and reads the picked
object directly from the Renderlayer/Image, therefore allowing to pick in any
context (e.g. by clicking on the Combined pass in the Image Viewer). The
sampled color is looked up in the metadata and the actual name is stored
in the cryptomatte node. This also allows to remove a hash by just removing
the name from the matte id.
Technically there is some loss of flexibility because the Cryptomatte pass
inputs can no longer be connected to other nodes, but since any compositing
done on them is likely to break the Cryptomatte system anyways, this isn't
really a concern in practise.
In the future, this would also allow to automatically translate values to names
by looking up the value in the associated metadata of the input, or to get a
better visualization of overlapping areas in the Pick output since we could
blend colors now that the output doesn't have to contain the exact value.
Idea + Original patch: Lucas Stockner
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D3959
The issue was caused by a prediction algorithm detecting tracking the
wrong way. Solved by passing tracking direction explicitly, so that
prediction will always happen correctly regardless of the state of the
Tracks context.
