for Apple OpenCL on OS X 10.8 and simple AO render.
Also environment variable CYCLES_OPENCL_TEST can now be set to CPU, GPU,
ACCELERATOR, DEFAULT or ALL values to test particuler devices.
well as I would like, but it works, just add a subsurface scattering node and
you can use it like any other BSDF.
It is using fully raytraced sampling compatible with progressive rendering
and other more advanced rendering algorithms we might used in the future, and
it uses no extra memory so it's suitable for complex scenes.
Disadvantage is that it can be quite noisy and slow. Two limitations that will
be solved are that it does not work with bump mapping yet, and that the falloff
function used is a simple cubic function, it's not using the real BSSRDF
falloff function yet.
The node has a color input, along with a scattering radius for each RGB color
channel along with an overall scale factor for the radii.
There is also no GPU support yet, will test if I can get that working later.
Node Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Shaders#BSSRDF
Implementation notes:
http://wiki.blender.org/index.php/Dev:2.6/Source/Render/Cycles/Subsurface_Scattering
* Make Cycles aware of sm_35 (Tesla K20, GeForce GTX TITAN).
The CUDA Toolkit 5.0 is needed for that and this is not officially used yet, but people with access to such cards can start testing. (just build sm_35 kernels).
precompiled cubins instead,
Logic here is following now:
- If there're precompiled cubins, assume CUDA compute is available,
otherwise
- If cuda toolkit found, assume CUDA compute is available
- In all other cases CUDA compute is not available
For windows there're still check for only precompiled binaries,
no runtime compilation is allowed.
Ended up with such decision after discussion with Brecht. The thing
is, if we'll support runtime compilation on windows we'll end up
having lots of reports about different aspects of something doesn't
work (you need particular toolkit version, msvc installed, environment
variables set properly and so) and giving feedback on such reports
will waste time.
big lamps and sharp glossy reflections. This was already supported for mesh
lights and the background, so lamps should do it too.
This is not for free and it's a bit slower than I hoped even though there is
no extra BVH ray intersection. I'll try to optimize it more later.
* Area lights look a bit different now, they had the wrong shape before.
* Also fixes a sampling issue in the non-progressive integrator.
* Only enabled for the CPU, will test on the GPU later.
* An option to disable this will be added for situations where it does not help.
Same time comparison before/after:
http://www.pasteall.org/pic/show.php?id=43313http://www.pasteall.org/pic/show.php?id=43314
should be no functional changes yet. UV, tangent and intercept are now stored
as attributes, with the intention to add more like multiple uv's, vertex
colors, generated coordinates and motion vectors later.
Things got a bit messy due to having both triangle and curve data in the same
mesh data structure, which also gives us two sets of attributes. This will get
cleaned up when we split the mesh class.
Patch [#33445] - Experimental Cycles Hair Rendering (CPU only)
This patch allows hair data to be exported to cycles and introduces a new line segment primitive to render with.
The UI appears under the particle tab and there is a new hair info node available.
It is only available under the experimental feature set and for cpu rendering.
a size parameter between 0.0 and 1.0 that gives a angle of reflection between
0° and 90°, and a smooth parameter that gives and angle over which a smooth
transition from full to no reflection happens.
These work with global illumination and do importance sampling of the area within
the angle. Note that unlike most other BSDF's these are not energy conserving in
general, in particular if their weight is 1.0 and size > 2/3 (or 60°) they will
add more energy in each bounce.
Diffuse: http://www.pasteall.org/pic/show.php?id=42119
Specular: http://www.pasteall.org/pic/show.php?id=42120
Also some simple OSL optimization, passing thread data pointer directly instead
of via thread local storage, and creating ustrings for attribute lookup.
Now one no longer needs to match the sensor dimensions with the render dimensions manually.
IMPORTANT NOTE: if you were using AUTO before with mismathing sensor aspect ratio (comparing to the render dimensions)
this will change your render! We can doversion this, but apart from Tube project I don't know if anyone else
is using this yet (part due to this bug and the only recently fixed 3dview preview aspect ratio).
That should help more artists to take advantage of this fantastic Blender feature.
It still helps to know the parameters of kwnown cameras/lens though.
For example:
Nikon DX2S with a 10.5mm fisheye can be set with:
Render resolution: 4288 x 2848
Sensor 23.7 x 15.70 (15.70 can be ommitted if AUTO is used as fit method)
Note: some cameras render different sizes according to the recording mode.
For example, a Red Scarlet in 5k (@12 fps) can render a full circular fisheye with a sigma 4.5 lens.
The same camera in the 30fps recording mode renders 4k in a cropped circular image.
So it's not only the resolution that changes, but the actual sensor been used.
So just keep in mind that the more information you have from the camera/lens you want to emulate the better.
Bug found at/patch written as a follow up of the BlenderPRO2012, patch reviewed by Brecht Van Lommel
problem is that the curved interpolation is not constant speed which leads to
mismatches. Turns out this is really hard to solve and implement efficiently, so
curved motion blur is disabled for now, until I can find a solution.
This option enables keeping loaded images in the memory in-between
of rendering.
Implemented by keeping render engine alive for until Render structure
is being freed.
Cycles will free all data when render finishes, optionally keeping
image manager untouched. All shaders, meshes, objects will be
re-allocated next time rendering happens.
Cycles cession and scene will be re-created from scratch if render/
scene parameters were changed.
This will also allow to keep compiled OSL shaders in memory without
need to re-compile them again.
P.S. Performance panel could be cleaned up a bit, not so much happy
with it's vertical alignment currently but not sure how to make
it look better.
P.P.S. Currently the only way to free images from the device is to
disable Persistent Images option and start rendering.
This commit adds memory usage information while rendering.
It reports memory used by device, meaning:
- For CPU it'll report real memory consumption
- For GPU rendering it'll report GPU memory consumption, but it'll
also mean the same memory is used from host side.
This information displays information about memory requested by Cycles,
not memory really allocated on a device. Real memory usage might be
higher because of memory fragmentation or optimistic memory allocator.
There's really nothing we can do against this.
Also in contrast with blender internal's render cycles memory usage
does not include memory used by scene, only memory needed by cycles
itself will be displayed. So don't freak out if memory usage reported
by cycles would be much lower than blender internal's.
This commit also adds RenderEngine.update_memory_stats callback which
is used to tell memory consumption from external engine to blender.
This information is used to generate information line after rendering
is finished.
Documentation here:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/OSLhttp://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.65/Cycles
These changes require an OSL build from this repository:
https://github.com/DingTo/OpenShadingLanguage
The lib/ OSL has not been updated yet, so you might want to keep OSL disabled
until that is done.
Still todo:
* Auto update for external .osl files not working currently, press update manually
* Node could indicate better when a refresh is needed
* Attributes like UV or generated coordinates may be missing when requested from
an OSL shader, need a way to request them to be loaded by cycles
* Expose string, enum and other non-socket parameters
* Scons build support
Thanks to Thomas, Lukas and Dalai for the implementation.
* Moved kernel/osl/nodes to kernel/shaders
* Renamed standard attributes to use geom:, particle:, object: prefixes
* Update stdosl.h to properly reflect the closures we support
* Fix the wrong stdosl.h being used for building shaders
* Add geom:numpolyvertices, geom:trianglevertices, geom:polyvertices attributes
- move object_iterators.c --> view3d_iterators. (ED_object.h had to include ED_view3d.h which isn't so nice)
- move projection functions from view3d_view.c --> view3d_project.c (view3d_view was becoming a mishmash of utility functions and operators).
- some some cmake includes as system-includes.
It's using the Ward BSDF currently, which has some energy loss so might be a bit
dark. More/better BSDF options can be implemented later.
Patch by Mike Farnsworth, some modifications by me. Currently it's not possible yet
to set a custom tangent, that will follow as part of per-bsdf normals patch.
