Snap to geometry is not supported when moving camera in camera view.
This is because the camera would make jumps that would be difficult to
predict and control.
The same happens if Snap Base were supported.
Therefore, disable Edit Snap Base when transforming camera into camera
view.
No functional changes.
Move the function `autokeyframe_pose` from
`transform_convert_armature.cc` to `keyframing_auto.cc`
The function has a lot of overlap with `autokeyframe_object` so it
can potentially be simplified later on.
Pull Request: https://projects.blender.org/blender/blender/pulls/115051
Use float3, float3x3, and Array for data used for mesh crazyspace
calculation. Propagate the change wherever necessary to not add
more casting to the old C types.
Because `ObjectRuntime` (and therefore `DEGObjectIterData`) became
non-trivial structs, the code that swaps iterators for RNA depsgraph
object iteration had to be changed a bit to be more friendly to C++
memory semantics.
Pull Request: https://projects.blender.org/blender/blender/pulls/114998
`target_snap_points` could have size 0, but even so
`memset(snap_data->target_snap_points, 0, sizeof(int));` was always
called.
Avoid writing to unallocated memory. And use C++ arrays.
Probably caused by ad01cdd7fc.
Once again, problems resetting values due to `td->val` and `td->loc`
sharing the same pointer.
This needs to be avoided, as when resetting it is always expected that
one will be 1D and the other 3D.
The distinction would start to become meaningless when we use C++
features in the older C header. The naming and lack of a proper
namespace should be enough to clarify the separation for now.
Discussed in #114646.
This commit transforms the "alt_navigation" option of the transform
operators into a new modal key item. "PASSTHROUGH_NAVIGATE"
In addition to cleaning up a lot of the code, it allows you to
customize the key chosen to navigate while transforming.
No functional changes.
`ANIM_get_normalization_flags` had the argument type of `bAnimContext *`.
That made it more difficult than it needs to be to reuse that function.
Pass a `SpaceLink *` instead since that is what the function actually uses.
Pull Request: https://projects.blender.org/blender/blender/pulls/114676
Restoring the behavior while transforming keys and pressing `Ctrl`
The regular snapping code has the feature that
when you press `Ctrl` you can toggle the snapping on and off.
Prior to 4.0 the snapping for the Graph Editor used a
completely different system, including a different flag to toggle snapping.
Because of that, the flag that the regular snapping
code uses was never set by default. So the system thought it was disabled.
Now when you press `Ctrl` you would enable that
flag and the snapping code would run.
It would snap to increments because that is the mode that
is returned for the Graph Editor space type.
(Note that this is the mode of the generic snapping
system, not of the Graph Editor specific one)
However at the same time, doing that would disable the
Graph Editor specific snapping code.
So the snapped values from the original system would bubble through.
This did not occur in the Dope Sheet and NLA Editor,
because those never returned a snapping mode.
Those still have a different behavior to 3.6 where they
now snap to seconds, instead of not snapping at all.
Pull Request: https://projects.blender.org/blender/blender/pulls/114607
Use `VectorSet`, `Vector` or `Span` instead of `SeqCollection` struct.
It is now possible to use native `for` loops and `SEQ_ITERATOR_FOREACH`
macro can be removed.
Another feature is, sets of strips no longer needs to be freed. However,
this poses a limitation, that query functions can not be used in case,
where these sets need to be available outside of scope where they are
created.
Pull Request: https://projects.blender.org/blender/blender/pulls/111909
Code tried to move such strips (using the same action on equal IDs such
as meshes or shapekeys) between tracks multiple times [even though they
were actually moved already] which could end up with the wrong track
index and things just went downhill from there.
So now skip strips we cannot find in the original track, saves
us from the whole codepatch about "Moving strip into track in the
requested direction".
Pull Request: https://projects.blender.org/blender/blender/pulls/114458
Adds a new scene tool setting `use_grease_pencil_multi_frame_editing`.
The `foreach_*_drawing` functions are moved to the `ed::greasepencil` namespace in the editor, since they are now context sensitive and depend on the toolsetting. They are now named `retrieve_editable_drawings` and `retrieve_visible_drawings` and return
an array of drawings instead of calling a callback function.
Pull Request: https://projects.blender.org/blender/blender/pulls/114283
The last good commit was 8474716abb.
After this commits from main were pushed to blender-v4.0-release. These are
being reverted.
Commits a4880576dc from to b26f176d1a that happend afterwards were meant for
4.0, and their contents is preserved.
The problem was that the array of `IndexMask`s was set to the
number of objects selected and not the number of curves in all
selected objects.
This fixes the transform code from relying on undefined behavior.
Pull Request: https://projects.blender.org/blender/blender/pulls/114088
Blender would crash when trying to move/duplicate, etc. some keyframes.
This was because the `convert_type_get` function in the transform code
would return the wrong transform type `TransConvertType_GreasePencil`
instead of `TransConvertType_Action`.
The fix makes sure that we only return the
`TransConvertType_GreasePencil` in the 3d viewport.
This is because `TRANSFORM_OT_edge_slide` has `OPTYPE_DEPENDS_ON_CURSOR`
flag set. Due to this, invoke call to loop-cut operator was not sent
from function `WM_operator_name_call_ptr_with_depends_on_cursor`.
Since `edge slide` operator does not depend on actual cusor position, we
can remove this operator flag to fix the problem.
Pull Request: https://projects.blender.org/blender/blender/pulls/113140
This adds the keybindings, menu, and functionally for the edit mode transform operators to grease pencil v3.
The transform operation include:
* translate, rotate, scale, change opacity, change radius
Pull Request: https://projects.blender.org/blender/blender/pulls/111836
Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
Caused by bd305c8d18
`snap_transform_data` adds an offset to each element being transformed.
However, this seems to only work for Move and Extend transformations.
Therefore, the solution is to make the NLA snapping system more generic.
Pull Request: https://projects.blender.org/blender/blender/pulls/113554
Currently object bounds (`object.runtime.bb`) are lazily initialized
when accessed. This access happens from arbitrary threads, and
is unprotected by a mutex. This can cause access to stale data at
best, and crashes at worst. Eager calculation is meant to keep this
working, but it's fragile.
Since e8f4010611, geometry bounds are cached in the geometry
itself, which makes this object-level cache redundant. So, it's clearer
to build the `BoundBox` from those cached bounds and return it by
value, without interacting with the object's cached bounding box.
The code change is is mostly a move from `const BoundBox *` to
`std::optional<BoundBox>`. This is only one step of a larger change
described in #96968. Followup steps would include switching to
a simpler and smaller `Bounds` type, removing redundant object-
level access, and eventually removing `object.runtime.bb`.
Access of bounds from the object for mesh, curves, and point cloud
objects should now be thread-safe. Other object types still lazily
initialize the object `BoundBox` cache since they don't have
a data-level cache.
Pull Request: https://projects.blender.org/blender/blender/pulls/113465
Introduced during snap code refactoring.
It seemed wrong to overwrite the calculated nearest distance based only
on the original distance.
But this is intentional, (the code could be improved since there are
unnecessary tests to detect the closest object).
`Vertex Crease`, like `Edge Crease`, is not supposed to use transform
symmetry.
So remove it.
(`Skin Resize` remains using symmetry since that case seems desirable.
See #84376)
