rB78a5895c96 introduced a "use after scope" warning, where a buffer
from a lower scope was used later. The solution is to only use one
variable and store whether to use it more explicitely with a bool.
The code for Bevel's percent (and absolute) modes were pretty bogus.
It assumed, like the rest of the modes, that the offset lines are
parallel to the beveled edge. Which is not true for these modes,
though it accidentally works sometimes if the legs are equilength.
Also the clamping code for those modes was completey wrong.
It is too hard to really fix the clamping code for absolute mode,
but it is a little better now. Percent mode clamping is fixed.
A general refactor / fix commit that should clear out the issues that have been reported on external forces and moving effectors (e.g. T79537, T81660, T80088).
Setting this type is required to prevent fluid particles from being treated like physics particles. The actual fix for this was made in rB11a8a6d0e6b5.
Scale widths of popovers and dialogs with Text Style font point changes.
Differential Revision: https://developer.blender.org/D9132
Reviewed by Hans Goudey
The "active_pose_bone" context variable isn't accessed from
`buttons_context`, it uses `screen_context` instead. This means
it can't account for pinning in the property editor.
Using "pose_bone" context variable first means the property
editor context will be used and the pinning will work.
Differential Revision: https://developer.blender.org/D9242
Code could call CustomData_get_layer_index_n with a negative index (if
no active and/or render UV layers are found). This would assert since
rBe86785c51445.
Spotted while looking into T81398.
Differential Revision: https://developer.blender.org/D9212
This was caused by canceling operator if strip has more than 0 inputs.
Logic should be reversed - cancel only if strip has 0 inputs.
BKE_sequencer_render_loop_check() arguments had to be sanitized because
seq_effect_find_selected() can set seq1,2,3 to NULL
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9197
- Expand the "Type" toggle at the top. This is consistent with other
modifiers where there is a "Type" option at the top. It conveys the
property's importance and makes it faster to switch it.
- Expand the "Delimit" option vertically so the text isn't squashed.
There isn't enough space on one line for this, and is has to be
expanded because more than one option can be selected. This is also
consistent with how "multi-select" enums are often displayed, like
the 3D view snapping settings.
| Before | After |
| {F9000996} | {F9000985} |
This patch implements panel expansion saving and resetting for property
search. While search is active, the panel expansion is based on whether
or not it has a search result. When the search finishes, the panel
expansion returns to its state before the search started. However, any
panels interacted with during the search won't reset their expansion.
This requires adding a new runtime flag for panels to store whether to
use search result status as expansion. It also requires better handling
for animation when panel expansion changes with another new runtime flag.
`UI_panel_is_closed` gets the search-dependent expansion, but it is
intentionally not used to access expansion in every case-- sometimes it's
necessary to use `PNL_CLOSED` directly.
Differential Revision: https://developer.blender.org/D8984
Add operator to snap the 2D Cursor value to selected keyframes. This is
doing almost the same as the "Cursor to Selected" operator, except that
it doesn't affect the current frame, just the Y-coordinate (the value)
of the 2D cursor.
The "snap cursor" operators are added to the Key → Snap menu and to the
Snap pie menu. This means that these menus are now extended in meaning,
to not only mean "snap the selected keyframes to the cursor", but also
for some options "snap the cursor to selected keyframes".
This fixes T76596.
Split up `GRAPH_OT_frame_jump` exec function and added some local variables
to give names to the cryptic `ked.f1`, `ked.f2`, and `ked.i1`.
No functional changes.
Remove sculpt/paint checks in getTransformOrientation_ex
This code goes back a long time (early 2.5x). I couldn't find any
reason why sculpt/paint checks were being made.
This makes the following changes:
- When in object mode, the object must be selected.
Since this function typically operates on the selected items.
- When in paint/particle modes, the objects matrix is always
used regardless of selection, since object selection can't be
controlled in these modes.
- When there is no active object, the first selected object is no
longer used as it's quite an arbitrary decision & not something
done elsewhere with objects in Blender.
Basically first letter of (most) words is to be capitalized.
These settings (Noodle curving and Grid levels) had this wrong since
their first commit (2011 and 2020 respectively).
Remove the code that synchronises selection state of shader node animation
channels. This code is only used in a few cases where selection of these
animation channels is changed, and then potentially does the wrong thing
and disallows selection of animation channels altogether.
This removal is meant to be a temporary situation, to unblock animation
channel selection. See T74159 for the overall effort to improve selection
sync.
This lets add-on authors avoid false positive leaks when exiting.
In particular GPUShaders's although it applies to any PyObject that
stores memory allocated by guarded-alloc.
While this does add overhead on exit, on my system it's
under 1/100th of a second with all addons enabled.
See: T71362
TBB includes Windows.h which defines a min/max macro
leading to issues when you want to use std::min and
std::max.
This change prevents Windows.h from defining them
sidestepping the issue.
Needed after d1b3439b80. Think the error only happened with fresh builds,
where dna_type_offsets.h didn't already exist.
We have to do the same in other places too, see 8594cdb456.
The `outliner.item_rename` operator needs to decide if it should rename the
active or the hovered item. Previously it checked if the event is a press
event, which is a hacky way of doing this and limit how the operator can be
used in the keymap.
Now use a operator option to let this be controlled on the keymap level.
Doesn't change any default behavior.
* Use existing and optimized lookup function, rather than own duplicated logic.
* Move low-level coordinate check into general function, alongside similar
ones.
* `do_outliner_item_rename()` enables the rename mode for the item under the
cursor. Issue is, collapsed children end up having stored the same coordinate
as their parent, so they too would get the rename mode enabled (there is no
early-exit that would hide this).
* The items displayed as inline icons do get the proper coordinates of the
icons, so they are not mistaken as being under the cursor.
After rBb077de086e14, the Outliner tree is rebuilt less often, so the
coordinates are cleared less often too.
As far as I can see we can always clear coordinates of invisible items now. No
code seems to depend on keeping the old coordinates anymore.
The new parameter made so that previously keyed Alpha values were lost
and instead the new "Emission Strength" was keyed.
Issue introduced with the original commit of Emission Strength: b248ec9776
Note: Files created since the issue (September 17) that keyframed the
Emission Strength will have to fix their files manually.
Differential Revision: https://developer.blender.org/D9221
The cloth brush grab mode was creating constraints at 1.0 strength in
the area of the brush where the fade was evaluated to 1. This was causing
stability issues in the simulation and not producing ideal results.
Now the constraint strength is scaled with an empirically found factor.
The values in this patch may require further tweaking after experimenting
a little bit more with them.
Reviewed By: sergey, zeddb
Differential Revision: https://developer.blender.org/D9201
Restore the old `correct_bezpart()` (pre-rBda95d1d851b4) function as
`BKE_curve_correct_bezpart()`, and use that where the old behaviour was
desired (that is, curve maps like used by the RGB Curves shader node).
The new (post-rBda95d1d851b4) function is also renamed to
`BKE_fcurve_correct_bezpart()` to avoid confusion.
When using anchored stroke, the stroke operator was modifying the
coordinates on the "mouse" rna property by setting them to the original
position. Because of this, all the sculpt delta calculation was failing
and the delta for these brushes was set randomly (with a 0 vector) at
the beginning of the stroke.
There is now an extra property that uses the unmodified coordinates of
the mouse to calculate the delta. Now delta orientation works as expected
in all brushes and features that require brush tip orientation.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9183
Dynamic area should use the radius instead of the initial radius to get
the nodes as the radius can now change during the stroke. In case of
anchored strokes, the current radius can be bigger than the initial
radius, simulating vertices outside the falloff area and breaking the
mesh.
Reviewed By: sergey
Maniphest Tasks: T81649
Differential Revision: https://developer.blender.org/D9181
Previously, all Face Set visibility logic was using mvert flags directly
to store the visibility state on the vertices while sculpting. As Face
Sets are a poly attribute, it is much simpler to use mpoly flags and let
BKE_mesh_flush_hidden_from_polys handle the vertex visibility, even for
Multires.
Now all operators that update the Face Set visibility state will always
copy the visibility to the mesh (using poly flags) and the grids, all
using the same code.
This should fix a lot of visibility glitches and bugs like the following:
- Sculpt visibility reset when changing multires levels.
- Multires visibility not updating in edit mode.
- Single face visibible when surrounded by visibile face set, even when
the face set was hidden.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9175
