1) Fixed some weird formatting introduced during math-lib cleanups, and some other inconsistencies
2) Optimised the Maintain Volume constraint by taking the value calculations out
Copy All Constraints Operators:
* Added one for bones too
* These are now included in the menus
* Removed some weird/extra code copying/changing/bleh the actcol/totcol stuff...
This constraint allows an object or bone to have their rotations applied as if their origin/pivot-point was located elsewhere. The most obvious uses include foot-roll, see-saws, but could also include more complicated rolling-box examples.
== Usage Examples ==
=== Foot Roll ===
1. Add 'Pivot' Constraint to the bone without any target.
2. Set the 'Y' value of the offset to the length of the bone. Usually this should be negative (if you rig with feet facing 'forwards' along -Y axis). This gives you a pivot point relative to the bone's (preconstraint) location, which should be at the tip of the bone here. Disabling the 'Use Relative Offset' would make this offset be relative to 0,0,0 instead of to the owner/bone-head.
3. Ensure that the 'Pivot When' setting is set to '-X Rot', (default) which means that the pivot will only used when the rotation on the X-Axis is negative to get tip-toe 'roll'.
=== See Saw ===
1. Add a 'Pivot' constraint too see-saw plank object, this time with a target that you wish to have as the pivot-point. It's possible to do this without too (as before), but is less intuitive.
2. Optionally, if you want the plank slightly raised, set the z-offset value, which should make the pivot-point used to be relative to the target with the z-offset applied.
3. Ensure that 'Pivot When' is set to 'Always', which means that the pivot will always be used, irrespective of the rotation.
== Notes ==
* The 'Pivot When' setting has been integrated in the constraint, since this is something that will often be required for these setups. Having to set up additional drivers to drive the constraint to do this kindof beats the purpose of providing this.
* The 'Offset' functionality is probably not presented as clearly as it could be. We may need to go over this again.
* For foot-roll - if any scaling of the foot is required, simply set up a driver on the y-offset to make this dynamically respond to the "scale" RNA property of the bones (don't use the "Transform Channel" vartype since that won't work correct here). However, this shouldn't be common enough to warrant special treatment.
Now, rather than the bit-too-alarming stop sign, threaded wmJobs
display a progress indicator in the header. This is an optional feature
for each job type and still uses the same hardcoded ui template
(could use further work here...).
Currently implemented for:
Render - parts completed, then nodes comped
Compositor - nodes comped
Fluid Sim - frames simulated
Texture Bake - faces baked
Example: http://mke3.net/blender/devel/2.5/progress.mov
- own mistake in scene help text.
- rename properties to have users as the prefix for better ordering.
- use fixed height for stamp, gives better aligned text.
- #22155: keyframe dots not shown on path for bone keyframes that aren't in a group with a matching name. Since this situation is going to become more common in 2.5, I've added an option which will alternatively just search the entire action to find all F-Curves associated with bones. The old option is still the default though for the general cases.
- When keyframe drawing is enabled, the current frame will also be indicated on the path now as a (bigger) green dot, as requested by William. This makes it easier to see the position on the path on the current frame.
Communicate the existing material displacement feature's strange dependence on both
'normal' and 'displacement' influences better. This will do until the improved displacement
is merged from render branch.
According to Matt the RMB->Copy to selected wouldn't work for logics because the copy we need is for the whole logic (s/c/a). So (at least for the time been), copy logic is possible again.
It work as 2.49 (replacing the existent logic).
Add Logics is a python menu to give quick access to add logics. I have to see how to put that in Add Menu. I should be easy, but I'll leave it for later.
*The narrowui value was hard coded in all ui scripts, made an user preferences option. Basically this value determines on which area width, it should switch between dual/single column layout.
ToDo: The Changes only take effect when reloading scripts/restarting Blender (after saving as default). Will maybe add the "Reload Scripts" operator next to the button in the future.
* Small fix for Fluid Add Button, when in single column mode. Didn't expand like the other "Add" Buttons.
"Select all of the same type" now is binding to Shift + GKEY
Two new function, select next and prev node of the same type.
Select a node and press Shift + [ or Shift + ] go to the
previous and next node of the same type (of the active node).
This is a small request from Venomgfx, select a node
and then press Shift + F to select all the nodes of the
same type (of the active node).
The key binding can be change, we thing in a "Find Next" (that is
way the FKEY) with venomgfx, but no problem with change that.
Also I add the entry in the select menu.
space / uv edit. The code was already there, and the option as a rna
bool, but no ui to set it. Matt figured that the View menu in image
space next to other uv stuff, which only shows when UVs are edited, is
the right place.
Works so that when entering editmode for an object to edit UVs, when
have also other objects selected and this option on, also the UVs of
those other objects are shown in the image view.
Liquidape asked this on IRC, and we thought the feat doesn't exist, so I
looked out of curiosity in the code as was thinking it would be easy to
add. Was surprised to find it there already :)
First time that did anything with 2.5, was sure fun enough to search
thru the code to figure out how things work. Adding this ui thing proved
to be exactly as trivial and nice as it should, and the things under the
hood seemed nice, yay!
- link now brings up a search box so when there are 100's of groups its less annoying.
- utility functions for id-enums so only local objects can be displayed in a search list (used for group_link)
- renamed operator properties from typle to scene, group, action etc.
Added operator (and menu entry) to deinterlace all selected movie strips.
(does also walk into selected meta strips)
Also: small fix for multicam cutting tool (now works also within metas)
Condition for this to work (.blend file must be saved) was poorly communicated
in the UI (printfs are no good for this - ideally should use reports). Tweaked this a bit.
Made Multicam-Editing really work:
* added a panel within N-keys, so that one can start/stop playback
and cut between cameras directly from the panel
* made "active_strip" RNA editable, to make that work correctly
(is usefull anyways :) )
Curve->lastselbp field was renamed to Curve->lastsel and now not last
either BPoint or BezTriple is storing here. It's not easy to determine
type of selected point, but operator which depends on such point reviews
the full nurbs, so this shouldn't be a problem.
Made changes to curve undo stuff to restore last selected point on undo/redo.
Added new theme color for curve last selected point.
'Mask layers' should be visible always, they still work to mask out objects on
layers when zmask isn't on (zmask is slightly different.. a bit confusing)
Icon tweaks too
