slightly outside the mesh.
Reported by Thomas Beck on irc. Issue here is that the mesh bounding box
changes as we are transforming the vertices. Solution is to collide
against the initial bounding box. Unfortunately the snapping functions
are made in a way that a lot of code needed to be tweaked here, but the
change should be straightforward and harmless (famous last words, I
know).
Ideally we might want to even increase the size of the bounding box a
little (as seen in screen space) to allow snapping even in cases where,
cursor is slightly outside the bounding box, but since this is not so
straightforward to do for all cases, at least for me, leaving this as
a TODO.
Undoing nodes that do not belong to the current object will cause the
saved bmesh log entry to be reverted instead. This entry can belong to
another object though.
This is easy to fix by enforcing name matching (this was borrowed by
edit mode but can definitely be improved) between current object name
and undo node name and deleting older entries.
However there are complications. Deleting dyntopo entries in this way
can leave a brush stroke as first dyntopo log entry. This can present
issues if we attempt to delete that entry since it's deleted mesh
elements may now have had their ids (which would still be valid at the
time) cleaned up. This can result in crashing if we attempt to resculpt
on the mesh. To fix this I have disabled releasing the deleted entries.
This entanglement between bm_log and undo is quite volatile but I hope
the system works better now.
Also minor cleanup, fix unneeded check warning
This makes it easier for finding the active or first selected channel
(where actual data channels need to be favoured over expanders - which come
first), as previously, long switch statements were needed everytime.
Sculpt mode drawing fails after deleting a subsurf modifier
in sculpt mode and undoing.
This was quite difficult to spot. Main cause was that mesh data was not
synchronized properly between undo and sculpt code because we generated
a pbvh on derivedmesh invalidation without really refreshing the rest of
the data. This could result in undo and drawing operating on different
data.
To solve this and avoid bad level calls I had to move quite some code
around. Crazyspace is now moved to blenkernel, as did some sculpt calls
that make sure sculpt data are properly refreshed.
This commit lays some of the groundwork needed to port the last of the NLA Editor
channel types that's still defined using custom code. By moving this code over
to the newer standardised framework, this will enable widgets to have tooltips
to make it easier for users to find out what various buttons do.
Currently this isn't hooked up to anything though.
1) The "pushdown" operation is the actual name for the functionality
previously represented by the snowflake. That is, pushing the active
action onto the NLA stack as a new strip.
The icon that is introduced here is the icon I originally wanted to
use here for this purpose (but couldn't at the time the NLA was coded
as we didn't have the master SVG available yet). I'm making this change
now to hopefully make the "animation-layers" intentions behind the NLA
design a lot clearer than they have been so far.
2) Also added a dedicated icon for representing that the active action
is in the "tweaking" state (i.e. we're editing a particular strip's
action). Previously we were abusing an icon designed for an entirely
different purpose, mainly since its identifier looked like it would work.
This patch adds icons for each of the keyframe interpolation types (including
the easing equations), as well as icons for the easing type options.
Icons made by: Paulo José Oliveira Amaro (pauloup)
Reviewed by: Joshua Leung, Thomas Beck
View2D had some inconsistencies making it error prone in some cases.
- Inconstant checking for NULL x/y args.
Disallow NULL args for x/y destination pointers, instead add:
- UI_view2d_region_to_view_x/y
- UI_view2d_view_to_region_x/y
- '_no_clip' suffix wasn't always used for non-clipping conversion,
switch it around and use a '_clip' suffix for all funcs that clip.
- UI_view2d_text_cache_add now clips before adding cache.
- '_clip' funcs return a bool to quickly check if its in the view.
- add conversion for rectangles, since this is a common task:
- UI_view2d_view_to_region_rcti
- UI_view2d_region_to_view_rctf
- pass label strlen since in many cases its already known.
- use single linked list for cached text drawing.
- add BLI_link_utils.h for single linked list macros.
own tests give approx 22% overall speedup.
This change introduces a new checkbox to deactivate the sensors, controllers and/or actuators. It is useful during the development phase to avoid delete sensors, controllers or actuators if you want to test something new.
NOC: The wiki page is being updated (the images mostly), but the feature is already in the 2.71 release log.
{F61628}
Reviewers: moguri, dfelinto, campbellbarton, dingto, #user_interface, billrey
Reviewed By: moguri
CC: billrey
Differential Revision: https://developer.blender.org/D16
Either was some residue from the past or somebody didn't implement this in
the right way.
Also fixed memory leak in ED_space_clip_color_sample() caused by missing
image buffer release.
This is done by adding a new button type, GRIP, similar to other numbuttons
(scroll, slider, ...), which here controls the preview height.
Then, we add a new DNA struct to be able to save that height in Blend files
(note I choose not to use Panel struct for this, because we would then have the
same limitation we used to have with uiLists, only one preview per panel
and no preview outside panel).
This implies a change to template_preview UI RNA/py API (each preview needs an ID),
but this is backward compatible, as by default datablock type will be used if no ID is
given (which means e.g. all material previews with no ID will have same height).
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D342
Ways how it was resetting its values (backspace) was far from satisfaying. Now, e.g. when scaling, it will reset at 1 (or whatever mouse-value it was before entering numinput), instead of some ugly 0.0 value.
Implementation details:
* Values passed to applyNumInput() are stored as default ones (val_org), if it is not EDITED.
* applyNumInput() returns a boolean saying whether it actually set values or not.
* When backspace hits its ultimate step (where it clears all EDITED flags and reset all default values),
it sets a temp FAKE_EDITED flag that will be used to apply one last time values of numinput
(so that default values actually get applied!).
There are important things to note here for code using numinput:
* Values passed to applyNumInput() should be valid and are stored as default ones (val_org), if it is not EDITED.
* bool returned by applyNumInput should be used to decide whether to apply numinput-specific post-process to data.
* *Once applyNumInput has been called*, hasNumInput returns a valid value to decide whether to use numinput as drawstr source or not.
Those two steps have to be separated (so do not use a common call to hasNumInput() to do both in the same time!).
This commit introduces support for a number of new interpolation types
which are useful for motion-graphics work. These define a number of
"easing equations" (basically, equations which define some preset
ways that one keyframe transitions to another) which reduce the amount
of manual work (inserting and tweaking keyframes) to achieve certain
common effects. For example, snappy movements, and fake-physics such
as bouncing/springing effects.
The additional interpolation types introduced in this commit can be found
in many packages and toolkits (notably Qt and all modern web browsers).
For more info and a few live demos, see [1] and [2].
Credits:
* Dan Eicher (dna) - Original patch
* Thomas Beck (plasmasolutions) - Porting/updating patch to 2.70 codebase
* Joshua Leung (aligorith) - Code review and a few polishing tweaks
Additional Resources:
[1] http://easings.net
[2] http://www.robertpenner.com/easing/
Was using wire or black in many places, this color is used for cursor,
camera guides, transform helper lines. So its possible to have a dark
background with light overlay color.
Patch D331 by Brita, with some edits.
history operator (Ctrl + Alt + Z).
This will only show paint operations now while in an image paint mode.
The caveat is that user can delete previous paint operations too (even
on images not on the canvas currently) so it needs some care. This is
consistent with regular undo behaviour though.
Sculpting also suffers from lack of Undo history support, this will be
added in a separate commit.
This is a standard Hue - Saturation - Lightness model
(see for instance entry on wikipedia here: https://en.wikipedia.org/wiki/HSL_and_HSV)
Note though the difference between HSV and HSL saturation, which are not the same.
The advantage of having this color selection scheme is that artists can select
shades and tints of a color easily by using the lightness slider. Also colors
are arranged on (approximated) perceived lightness on the color wheel.
Beware, Old files opened with this preference saved will crash!
Reviewers: sergey, brecht, campbellbarton
Differential Revision: https://developer.blender.org/D385
