For correct results these must have been set already when the depsgraph was
created and evaluated, so all dependencies have appropriate resolutions too.
For particle we no longer backup and restore the viewport particles to avoid
overwriting them during render, as copy-on-write solves this for us. Even
without COW particles seem to work ok.
This also removes the particle simplification options based on camera. This
was never used much and only available in Blender Internal.
Differential Revision: https://developer.blender.org/D3148
Now the only missing bit seems to be in Cycles to pass depsgraph to
builtin_image_float_pixels().
Ideally we could get evaluation context instead of using depsgraph + settings.
But for the other rna EvaluationContext functions this is how we are doing.
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3087
This still does not make point density to work in Cycles, but at least it pass
the depsgraph down the line.
Note this was working fine before the depsgraph/render refactor to pass
evaluated depsgraph to the engines.
Similar to the Principled BSDF, this should make it easier to set up volume
materials. Smoke and fire can be rendererd with just a single principled
volume node, the appropriate attributes will be used when available. The node
also works for simpler homogeneous volumes like water or mist.
Differential Revision: https://developer.blender.org/D3033
It is basically brute force volume scattering within the mesh, but part
of the SSS code for faster performance. The main difference with actual
volume scattering is that we assume the boundaries are diffuse and that
all lighting is coming through this boundary from outside the volume.
This gives much more accurate results for thin features and low density.
Some challenges remain however:
* Significantly more noisy than BSSRDF. Adding Dwivedi sampling may help
here, but it's unclear still how much it helps in real world cases.
* Due to this being a volumetric method, geometry like eyes or mouth can
darken the skin on the outside. We may be able to reduce this effect,
or users can compensate for it by reducing the scattering radius in
such areas.
* Sharp corners are quite bright. This matches actual volume rendering
and results in some other renderers, but maybe not so much real world
objects.
Differential Revision: https://developer.blender.org/D3054
This adds midlevel and object/world space for displacement, and a
vector displacement node with tangent/object/world space, midlevel
and scale.
Note that tangent space vector displacement still is not exactly
compatible with maps created by other software, this will require
changes to the tangent computation.
Differential Revision: https://developer.blender.org/D1734
This converts object space height to world space displacement, to be
linked to the new vector displacement material output.
Differential Revision: https://developer.blender.org/D3015
This can be enabled in the Film panel, with an option to control the
transmisison roughness below which glass becomes transparent.
Differential Revision: https://developer.blender.org/D2904
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
The algorithm averages normals from nearby surfaces. It uses the same
sampling strategy as BSSRDFs, casting rays along the normal and two
orthogonal axes, and combining the samples with MIS.
The main concern here is that we are introducing raytracing inside
shader evaluation, which could be quite bad for GPU performance and
stack memory usage. In practice it doesn't seem so bad though.
Note that using this feature can easily slow down renders 20%, and
that if you care about performance then it's better to use a bevel
modifier. Mainly this is useful for baking, and for cases where the
mesh topology makes it difficult for the bevel modifier to work well.
Differential Revision: https://developer.blender.org/D2803
We are already using the AO distance, so might as well offer this extra
control over the intensity. Useful when an interior scene is supposed to
be significantly darker than the background shader.
Since we started supporting the (Cycles) Material Output old files
stopped working. There is no reason to keep the original Eevee material
otuput anymore.
It includes doversion for old files.
This changes the Cycles exporting and Cycles/Eevee UI code to support both
output material nodes, giving priority to the renderer native one. Still
missing is Eevee code to prefer the Eevee output node.
Note that some little parts of code have been dissabled because eval_ctx
was not available there. This should be resolved once DerivedMesh is
replaced.
< Dependency graph Copy-on-Write >
--------------------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
This is an initial commit of Copy-on-write support added to dependency graph.
Main priority for now: get playback (Alt-A) and all operators (selection,
transform etc) to work with the new concept of clear separation between
evaluated data coming from dependency graph and original data coming from
.blend file (and stored in bmain).
= How does this work? =
The idea is to support Copy-on-Write on the ID level. This means, we duplicate
the whole ID before we cann it's evaluaiton function. This is currently done
in the following way:
- At the depsgraph construction time we create "shallow" copy of the ID
datablock, just so we know it's pointer in memory and can use for function
bindings.
- At the evaluaiton time, the copy of ID get's "expanded" (needs a better
name internally, so it does not conflict with expanding datablocks during
library linking), which means the content of the datablock is being
copied over and all IDs are getting remapped to the copied ones.
Currently we do the whole copy, in the future we will support some tricks
here to prevent duplicating geometry arrays (verts, edges, loops, faces
and polys) when we don't need that.
- Evaluation functions are operating on copied datablocks and never touching
original datablock.
- There are some cases when we need to know non-ID pointers for function
bindings. This mainly applies to scene collections and armatures. The
idea of dealing with this is to "expand" copy-on-write datablock at
the dependency graph build time. This might introduce some slowdown to the
dependency graph construction time, but allows us to have minimal changes
in the code and avoid any hash look-up from evaluation function (one of
the ideas to avoid using pointers as function bindings is to pass name
of layer or a bone to the evaluation function and look up actual data based
on that name).
Currently there is a special function in depsgraph which does such a
synchronization, in the future we might want to make it more generic.
At some point we need to synchronize copy-on-write version of datablock with
the original version. This happens, i.e., when we change active object or
change selection. We don't want any actual evaluation of update flush happening
for such thins, so now we have a special update tag:
DEG_id_tag_update((id, DEG_TAG_COPY_ON_WRITE)
- For the render engines we now have special call for the dependency graph to
give evaluated datablock for the given original one. This isn't fully ideal
but allows to have Cycles viewport render.
This is definitely a subject for further investigation / improvement.
This call will tag copy-on-write component tagged for update without causing
updates to be flushed to any other objects, causing chain reaction of updates.
This tag is handy when selection in the scene changes.
This basically summarizes ideas underneath this commit. The code should be
reasonably documented.
Here is a demo of dependency graph with all copy-on-write stuff in it:
https://developer.blender.org/F635468
= What to expect to (not) work? =
- Only meshes are properly-ish aware of copy-on-write currently, Non-mesh
geometry will probably crash or will not work at all.
- Armatures will need similar depsgraph built-time expansion of the copied
datablock.
- There are some extra tags / relations added, to keep things demo-able but
which are slowing things down for evaluation.
- Edit mode works for until click selection is used (due to the selection
code using EditDerivedMesh created ad-hoc).
- Lots of tools will lack tagging synchronization of copied datablock for
sync with original ID.
= How to move forward? =
There is some tedious work related on going over all the tools, checking
whether they need to work with original or final evaluated object and make
the required changes.
Additionally, there need synchronization tag done in fair amount of tools
and operators as well. For example, currently it's not possible to change
render engine without re-opening the file or forcing dependency graph for
re-build via python console.
There is also now some thoughts required about copying evaluated properties
between objects or from collection to a new object. Perhaps easiest way
would be to move base flag flush to Object ID node and tag new objects for
update instead of doing manual copy.
here is some WIP patch which moves such evaluaiton / flush:
https://developer.blender.org/F635479
Lots of TODOs in the code, with possible optimization.
= How to test? =
This is a feature under heavy development, so obviously it is disabled by
default. The only reason it goes to 2.8 branch is to avoid possible merge
hell.
In order to enable this feature use WITH_DEPSGRAPH_COPY_ON_WRITE CMake
configuration option.
commit 90778901c9ea1e16d5907981e91bceba25ff207d
Merge: 76eebd9 3bf0026
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Mon Apr 3 07:52:05 2017 +0200
Merge branch 'master' into cycles_disney_brdf
commit 76eebd9379a5dad519ff01cf215fbe3db6de931e
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Thu Mar 30 15:34:20 2017 +0200
Updated copyright for the new files.
commit 013f4a152a3898946ba5c616141c6e44d928ccfd
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Thu Mar 30 15:32:55 2017 +0200
Switched from multiplication of base and subsurface color to blending
between them using the subsurface parameter.
commit 482ec5d1f20ceabc9cbda4838d4ae37d1d673458
Author: Schoen <schoepas@deher1m1598.emea.adsint.biz>
Date: Mon Mar 13 15:47:12 2017 +0100
Fixed a bug that caused an additional white diffuse closure call when using
path tracing.
commit 26e906d162a6a8d67f2ebc8880993fcbab69559e
Merge: 0593b8c 223aff9
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Feb 6 11:32:31 2017 +0100
Merge branch 'master' into cycles_disney_brdf
commit 0593b8c51bf7db0ed5ca92ed6f68d0d984dad0dd
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Feb 6 11:30:36 2017 +0100
Fixed the broken GLSL shader and implemented the Disney BRDF in the
real-time view port.
commit 8c7e11423be640dc44b1807912058480710e51f4
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Feb 3 14:24:05 2017 +0100
Fix to comply strict compiler flags and some code cleanup
commit 17724e9d2dbffb1aaa61401224ecbf2349c1dac3
Merge: 379ba34 520afa2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jan 24 09:59:58 2017 +0100
Merge branch 'master' into cycles_disney_brdf
commit 379ba346b0acd1ea779365b940fcd01f5ba1165f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jan 24 09:28:56 2017 +0100
Renamed the Disney BSDF to Principled BSDF.
commit f80dcb4f34f1dc41841ced5965787fc26ace22a2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Dec 2 13:55:12 2016 +0100
Removed reflection call when roughness is low because of artifacts.
commit 732db8a57f6d4e5d6f44bbad176c15fd55377f0a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Nov 16 09:22:25 2016 +0100
Indication if to use fresnel is now handled via the type of the BSDF.
commit 0103659f5e705b314cde98b0e4a01c14c55acd5e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Nov 11 13:04:11 2016 +0100
Fixed an error in the clearcoat where it appeared too bright for default
light sources (like directional lights)
commit 0aa68f533529c9fd197a3ab0427f9e41a15456b9
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Nov 7 12:04:38 2016 +0100
Resolved inconsistencies in using tabs and spaces
commit f5897a9494e352de274b99e7bee971336c0dc386
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Nov 7 08:13:41 2016 +0100
Improved the clearcoat part by using GTR1 instead of GTR2
commit 3dfc240e61b3d4d0e7c476989792e4ada869ce91
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 31 11:31:36 2016 +0100
Use reflection BSDF for glossy reflections when roughness is 0.0 to
reduce computational expense and some code cleanup
Code cleanup includes:
- Code style cleanup and removed unused code
- Consolidated code in the bsdf_microfacet_multi_impl.h to reduce
some computational expense
commit a2dd0c5fafdabe1573299170fb3be98a3e46d17a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Oct 26 08:51:10 2016 +0200
Fixed glossy reflections and refractions for low roughness values and
cleaned up the code.
For low roughness values, the reflections had some strange behavior.
commit 981737591231a1a5a1c85950950580b65d029505
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Oct 25 12:37:40 2016 +0200
Removed default values in setup functions and added extra functions for
GGX with fresnel.
commit bbc5d9d4527346a74155cf17be21fb02ee3e0779
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Oct 25 11:09:36 2016 +0200
Switched from uniform to cosine hemisphere sampling for the diffuse and
the sheen part.
commit d52d8f2813d64363713f11160a6c725d4cafbcfa
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 16:17:13 2016 +0200
Removed the color parameters from the diffuse and sheen shader and use
them as closure weights instead.
commit 8f3d92738532ad867a0a3543c00393626ab8f6ec
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 09:57:06 2016 +0200
Fixed the issue with artifacts when using anisotropy without linking the
tangent input to a tangent node.
commit d93f680db9acaaade0354b34857a3ccaf348557f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 09:14:51 2016 +0200
Added subsurface radius parameter to control the per color channel
effection radius of the subsurface scattering.
commit c708c3e53b323773fc852bdc239bc51e157dcaef
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Oct 24 08:14:10 2016 +0200
Rearranged the inputs of the shader.
commit dfbfff9c389074d3e5c1f49dd38a95e9b317eb1f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Oct 21 09:27:05 2016 +0200
Put spaces in the parameter names of the shader node
commit e5a748ced17c8f59e5e73309096adeea3ba95e04
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Oct 21 08:51:20 2016 +0200
Removed code that isn't in use anymore
commit 75992bebc128c8b44cab4f0d8855603787f57260
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Oct 21 08:50:07 2016 +0200
Code style cleanup
commit 4dfcf455f7769752044e051b399fb6a5dfcd0e22
Merge: 243a0e3 2cd6a89
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Thu Oct 20 10:41:50 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit 243a0e3eb80ef82704d5ea2657384c3a4b9fb497
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Thu Oct 20 10:01:45 2016 +0200
Switching between OSL and SVM is more consistant now when using Disney
BSDF.
There were some minor differences in the OSL implementation, e.g. the
refraction roughness was missing.
commit 2a5ac509223c838285a00c4c12775567666e7154
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 09:17:57 2016 +0200
Fixed a bug that caused transparency to be always white when using OSL and
selecting GGX as distribution of the Disney BSDF
commit e1fa8623915407cea942a07fd0a106b04e113c09
Merge: d0530a8 7f76f6f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 08:59:32 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit d0530a8af0e076c0aca4c9a61b0a64cada45ac4d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 08:53:18 2016 +0200
Cleanup the Disney BSDF implementation and removing unneeded files.
commit 3f4fc826bd9c1f47c694c0f6b2947daf5b524b1a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 27 08:36:07 2016 +0200
Unified the OSL implementation of the Disney clearcoat as a simple
microfacet shader like it was previously done in SVM
commit 4d3a0032ecea99031979f342bfd5f66ea5a8625a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Sep 26 12:35:36 2016 +0200
Enhanced performance for Disney materials without subsurface scattering
commit 3cd5eb56cf5c9006837f111c8866e4c6e1c2a6fd
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Sep 16 08:47:56 2016 +0200
Fixed a bug in the Disney BSDF that caused specular reflections to be too
bright and diffuse is now reacting to the roughness again
- A normalization for the fresnel was missing which caused the specular
reflections to become too bright for the single-scatter GGX
- The roughness value for the diffuse BSSRDF part has always been
overwritten and thus always 0
- Also the performance for refractive materials with roughness=0.0 has
been improved
commit 7cb37d711938e5626651db21f20da50edd96abaf
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Thu Sep 8 12:24:43 2016 +0200
Added selection field to the Disney BSDF node for switching between
"Multiscatter GGX" and "GGX"
In the "GGX" mode there is an additional parameter for changing the
refraction roughness for materials with smooth surfaces and rough interns
(e.g. honey). With the "Multiscatter GGX" this effect can't be produced at
the moment and so here will be no separation of the two roughness values.
commit cdd29d06bb86672ed0779eefb8eee95796b8f939
Merge: 02c315a b40d1c1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 6 15:59:05 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit 02c315aeb0f0d7bb429d4396912e03dbb8a77340
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Sep 6 15:16:09 2016 +0200
Implemented the OSL part of the Disney shader
commit 5f880293aeeacf269032824248b46d613691a36c
Merge: 630b80e b399a6d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Sep 2 10:53:36 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit 630b80e08b6acf83834bc95264af4ccdbbc5f82c
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Sep 2 10:52:13 2016 +0200
Fresnel in the microfacet multiscatter implementation improved
commit 0d9f4d7acb2de65d1c98d425cea4bf364795c155
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Aug 26 11:11:05 2016 +0200
Fixed refraction roughness problem (refractions were always 100% rough)
and set IOR of clearcoat to 1.5
commit 9eed34c7d980e1b998df457c4f76021162c80f78
Merge: ef29aae ae475e3
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Aug 16 15:22:32 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit ef29aaee1af8074e0228c480d962700e97ea5b36
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Aug 16 15:17:12 2016 +0200
Implemented the fresnel in the multi-scatter GGX for the Disney BSDF
- The specular/metallic part uses the multi-scatter GGX
- The fresnel of the metallic part is controlled by the specular value
- The color of the reflection part when using transparency can be
controlled by the specularTint value
commit 88567af085ac94119b98c95246b6d6f63161bc01
Merge: cc267e5 285e082
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Aug 3 15:05:09 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit cc267e52f20d036a66aeeff127ee1c856f7c651b
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Aug 3 15:00:25 2016 +0200
Implemented the Disney clearcoat as a variation of the microfacet bsdf,
removed the transparency roughness again and added an input for
anisotropic rotations
commit 81f6c06b1f53180bf32a5c11ac1fa64e2b6abf52
Merge: ece5a08 7065022
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Aug 3 11:42:02 2016 +0200
Merge branch 'master' into cycles_disney_brdf
commit ece5a08e0d6e51a83c223ea87346134216e5b34e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 16:29:21 2016 +0200
Base color now applied again to the refraction of transparent Disney
materials
commit e3aff6849e06853c56da7bd610210dcab70e6070
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 16:05:19 2016 +0200
Added subsurface color parameter to the Disney shader
commit b3ca6d8a2f4f866b323fc2df0a3beff577218c27
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 12:30:25 2016 +0200
Improvement of the SSS in the Disney shader
* Now the bump normal is correctly used for the SSS.
* SSS in Disney uses the Disney diffuse shader
commit d68729300ee557e90a8e7e4be6eb8ef98db80fe2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jul 26 12:23:13 2016 +0200
Better calculation of the Disney diffuse part
Now the values for NdotL und NdotV are clamped to 0.0f for a better look
when using normal maps
commit cb6e500b12e7bce884d3db19ee138c975c215f2d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Jul 25 16:26:42 2016 +0200
Now one can disable specular reflactions again by setting specular and
metallic to 0 (cracked this in the previous commit)
commit bfb9cb11b548103369de2a46ce18b4ddf661362c
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Jul 25 16:11:07 2016 +0200
fixed the Disney SSS and cleaned the initialization of the Disney shaders
commit 642c0fdad12548c1a2ccbf595bae3a995d3022f7
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Jul 25 16:09:55 2016 +0200
fixed an error that was caused by the missing LABEL_REFLECT in the Disney
diffuse shader
commit c10b484dcad3412c34455736e9656cd38716bcb0
Author: Jens Verwiebe <info@jensverwiebe.de>
Date: Fri Jul 22 01:15:21 2016 +0200
Rollback attempt to fix sss crashing, it prevented crash by disabling sss completely, thus useless
commit 462bba3f97fcc41834e0e20cc806a7958e5106f5
Author: Jens Verwiebe <info@jensverwiebe.de>
Date: Thu Jul 21 23:11:59 2016 +0200
Add an undef for sc_next for safety
commit 32d348577d69be251aa04110c5f6156cd2645f48
Author: Jens Verwiebe <info@jensverwiebe.de>
Date: Thu Jul 21 00:15:48 2016 +0200
Attempt to fix Disney SSS
commit dbad91ca6d46f5a4a6f2ba7ed4c811ffa723942f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed Jul 20 11:13:00 2016 +0200
Added a roughness parameter for refractions (for scattering of the rays
within an object)
With this, one can create a translucent material with a smooth surface and
with a milky look.
The final refraction roughness has to be calculated using the surface
roughness and the refraction roughness because those two are correlated
for refractions. If a ray hits a rough surface of a translucent material,
it is scattered while entering the surface. Then it is scattered further
within the object. The calculation I'm using is the following:
RefrRoughnessFinal = 1.0 - (1.0 - Roughness) * (1.0 - RefrRoughness)
commit 50ea5e3e34394a727e3cceb6203adb48834a9ab7
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue Jun 7 10:24:50 2016 +0200
Disney BSDF is now supporting CUDA
commit 10974cc826a4bfa8fb3ef59177abf0b0dc441065
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 31 11:18:07 2016 +0200
Added parameters IOR and Transparency for refractions
With this, the Disney BRDF/BSSRDF is extended by the BTDF part.
commit 218202c0905a4ec93ee19850360d1a39966d2c25
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 15:08:18 2016 +0200
Added an additional normal for the clearcoat
With this normal one can simulate a thin layer of clearcoat by applying a
smoother normal map than the original to this input
commit dd139ead7e04aa87a894ccf3732cfce711258ff1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 12:40:56 2016 +0200
Switched to the improved subsurface scattering from Christensen and
Burley
commit 11160fa4e1c32230119d4506e7e9fd3da2ab37f2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 10:16:30 2016 +0200
Added Disney Sheen shader as a preparation to get to a BSSRDF
commit cee4fe0cc94515ee60d4afa4d4e10c41003f1579
Merge: 4f955d0 6b5bab6
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon May 30 09:08:09 2016 +0200
Merge branch 'cycles_disney_brdf' of git.blender.org:blender into cycles_disney_brdf
Conflicts:
intern/cycles/kernel/closure/bsdf_disney_clearcoat.h
intern/cycles/kernel/closure/bsdf_disney_diffuse.h
intern/cycles/kernel/closure/bsdf_disney_specular.h
intern/cycles/kernel/closure/bsdf_util.h
intern/cycles/kernel/osl/CMakeLists.txt
intern/cycles/kernel/osl/bsdf_disney_clearcoat.cpp
intern/cycles/kernel/osl/bsdf_disney_diffuse.cpp
intern/cycles/kernel/osl/bsdf_disney_specular.cpp
intern/cycles/kernel/osl/osl_closures.h
intern/cycles/kernel/shaders/node_disney_bsdf.osl
intern/cycles/render/nodes.cpp
intern/cycles/render/nodes.h
commit 4f955d052358206209454decf2c3539e6a21b42f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 24 16:38:23 2016 +0200
SVM and OSL are both working for the simple version of the Disney BRDF
commit 1f5c41874b01ad297eb8a6bad9985296c6c0a6e1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 24 09:58:50 2016 +0200
Disney node can be used without SVM and started to cleanup the OSL implementation
There is still some wrong behavior for SVM for the Schlick Fresnel part at the
specular and clearcoat
commit d4b814e9304ebb44cc7c291cd83f7b7cdebcd152
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:22:29 2016 +0200
Switched from a parameter struct for Disney parameters to ShaderClosure params
commit b86a1f5ba5019c7818153cb70b49f5f7a0bc52a0
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:19:57 2016 +0200
Added additional variables for storing parameters in the ShaderClosure struct
commit 585b88623695fa07dfca9c9909d6d9184c3519c8
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 12:03:17 2016 +0200
added output parameter to the DisneyBsdfNode
That has been forgotten after removing the inheritance of BsdfNode
commit f91a28639884cbda7804715b910d64abba0718ef
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 10:40:48 2016 +0200
removed BsdfNode class inheritance for DisneyBsdfNode
That's due to a naming difference. The Disney BSDF uses the name 'Base Color'
while the BsdfNode had a 'Color' input. That caused a text message to be
printed while rendering.
commit 30da91c9c51d8cbc6a7564c7aaa61c9efe2ab654
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 16:08:10 2016 +0200
disney implementation cleaned
commit 30d41da0f0352fad29375a395ffcb9cb7891eeb1
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 13:23:07 2016 +0200
added the disney brdf as a shader node
commit 1f099fce249cb35e949cc629f7cca2167fca881a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 3 16:54:49 2016 +0200
added clearcoat implementation
commit 00a1378b98e435e9cdbfbac86eb974c19b2a8151
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Apr 29 22:56:49 2016 +0200
disney diffuse und specular implemented
commit 6baa7a7eb787638661cddad0c4e7f78bd3a8fa5c
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 15:21:32 2016 +0200
disney diffuse is working correctly
commit d8fa169bf3caf71c40a124101b33dee6c510188e
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 08:41:53 2016 +0200
added vessel for disney diffuse shader
commit 6b5bab6cecde153122625cf8dc10e4209ed1eb0f
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:22:29 2016 +0200
Switched from a parameter struct for Disney parameters to ShaderClosure params
commit f6499c2676e074a36033627ffc7540107777630d
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 18 10:19:57 2016 +0200
Added additional variables for storing parameters in the ShaderClosure struct
commit 7100640b65c2ff5447a18c01fc4e93594b4f486a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 12:03:17 2016 +0200
added output parameter to the DisneyBsdfNode
That has been forgotten after removing the inheritance of BsdfNode
commit 419ee5441100a906b4b3fd8373cb768a71bfdfe6
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 17 10:40:48 2016 +0200
removed BsdfNode class inheritance for DisneyBsdfNode
That's due to a naming difference. The Disney BSDF uses the name 'Base Color'
while the BsdfNode had a 'Color' input. That caused a text message to be
printed while rendering.
commit 6006f91e8730f78df5874f808690d3908db103ab
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 16:08:10 2016 +0200
disney implementation cleaned
commit 0ed08959141fc7c5f8c6e37c6552ecb9fcc5749c
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Wed May 4 13:23:07 2016 +0200
added the disney brdf as a shader node
commit 0630b742d71c658915575a4a71a325094a0fc313
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Tue May 3 16:54:49 2016 +0200
added clearcoat implementation
commit 9f3d39744b85619750c79c901f678b8c07fe0ee2
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Fri Apr 29 22:56:49 2016 +0200
disney diffuse und specular implemented
commit 9b262063767d6b05a617891c967d887d21bfb177
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 15:21:32 2016 +0200
disney diffuse is working correctly
commit 4711a3927dfcadaa1c36de0ba78fc304fac1dc8a
Author: Pascal Schoen <pascal_schoen@gmx.net>
Date: Mon Apr 18 08:41:53 2016 +0200
added vessel for disney diffuse shader
Differential Revision: https://developer.blender.org/D2313
This avoids write access happening in non-atomic manner in
Shader::tag_update which modifies the global managers. Even
for 1 byte data types it's quite dangerous.
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Before, Cycles would first sync the shader exactly as shown in the UI, then determine and sync the used attributes and later optimize the shader.
Therefore, even completely unconnected nodes would cause unneccessary attributes to be synced.
The reason for this is to avoid frequent resyncs when editing shaders interactively, but it can still be avoided for noninteractive renders - which is what this commit does.
Reviewed by: sergey
Differential Revision: https://developer.blender.org/D2285
Displacement is now a per material setting, which means old files will have to
be updated if they had used displacement. Cool side effect of this change is
material previews now show displacement.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2140
The shader sync code used the anisotropic version of the Ashikhmin-Shirley closure for both
Anisotropic and Glossy BSDF, which caused a failed assert because the anisotropic closure
expects an addiitonal SVM node.
This commit adds a new distribution to the Glossy, Anisotropic and Glass BSDFs that implements the
multiple-scattering microfacet model described in the paper "Multiple-Scattering Microfacet BSDFs with the Smith Model".
Essentially, the improvement is that unlike classical GGX, which only models single scattering and assumes
the contribution of multiple bounces to be zero, this new model performs a random walk on the microsurface until
the ray leaves it again, which ensures perfect energy conservation.
In practise, this means that the "darkening problem" - GGX materials becoming darker with increasing
roughness - is solved in a physically correct and efficient way.
The downside of this model is that it has no (known) analytic expression for evalation. However, it can be
evaluated stochastically, and although the correct PDF isn't known either, the properties of MIS and the
balance heuristic guarantee an unbiased result at the cost of slightly higher noise.
Reviewers: dingto, #cycles, brecht
Reviewed By: dingto, #cycles, brecht
Subscribers: bliblubli, ace_dragon, gregzaal, brecht, harvester, dingto, marcog, swerner, jtheninja, Blendify, nutel
Differential Revision: https://developer.blender.org/D2002
