This is due to the wrong offset when "navigation controls" is off. Axis
gizmo is still visible so "else" codeblock is expected to handle the
correct offset value.
Pull Request: https://projects.blender.org/blender/blender/pulls/121775
Recent changes overlay drawing code resulted in a call to draw the
"Autokeying" text being removed, showing only the icon. This PR just
replaces one removed line.
Pull Request: https://projects.blender.org/blender/blender/pulls/121811
With Aras's recent changes in #121383, our text shader now supports
outline shadows, which gives a result that has more contrast than can
be achieved with BLF_draw_default_shadowed. This removes that function.
Pull Request: https://projects.blender.org/blender/blender/pulls/121676
Continuation of 3d6bb6ce04
This 'alt' hotkey is captured in the modal map
`TFM_MODAL_PASSTHROUGH_NAVIGATE` in order to appear in the header.
But this modal map is not necessary.
Addresses two improvements to `Snap to Grid` as suggested in #73993:
- Make 'Absolute Grid Snapping' a new Snap Mode
- Snap to Grid in Non-Side View performed at ground level
Implementation details:
- Snap to Grid has no cursor symbol, unless we are in `Set Snap Base`
mode. Similar to the previous 'Absolute Grid Snap' behavior.
- In Non-Side view, Snap to Grid is performed at ground level.
- If `Snap Base` is `Closest`, Snap to Grid uses the transform pivot
point instead. Similar to the previous 'Absolute Grid Snap' behavior.
- The "Absolute Grid Snap" option has been removed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116109
Add two snapping increment options: a regular value
(activated with Ctrl) and a precise value (activated with Ctrl+Shift).
These values are separate for 2D and 3D views.
Ref !118760
This is a different solution to #32068
The sliding edge occlusion test is done to prevent a non-visible
reference vertex from being used to calculate the factor direction.
This commit changes the behavior, but the difference is difficult to
notice.
The changes in behavior are:
- Other objects affect occlusion.
- Slide direction is used to test occlusion instead of edge.
- The reference point is now the point whose direction is visible and
is closest to the mouse cursor.
When using proportional editing in the Graph Editor or the Dope Sheet,
the GUI displays a circle suggesting that the influence is limited in x and y.
In reality those editors only look at the x-axis to determine which keys to influence.
This PR fixes that by adding a new drawing function for those editors that
draws 2 lines to indicate a range.
In theory this can be a feature in other 2D editors in the future.
I assume the VSE would benefit from this as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/118196
Although the information displayed in the status bar is strictly
speaking reports, it makes sense to translate them using the Interface
setting instead of Reports, as the tool names and stats terms are
also translated in other UI places (toolbar, menus).
This change includes status bars statistics and keymaps, and viewport
statistics.
The change is quite extensive as it is all or nothing. Translating
keymaps using Interface means some status messages will include them
indirectly, and thus cannot use Reports without having a weird mix of
original and translated words. In turn, having only some messages
translated would be even more confusing.
The result is that all messages related to input are now translated with
Interface, which I think also makes sense.
Discussed as a followup to !116804.
-----
cc. @gtitaev
Pull Request: https://projects.blender.org/blender/blender/pulls/117234
Splits the flag `..._FLAG_INSERTNEEDED` between autokey and
manual keying. The fact that this flag was shared between the two
systems has been the cause of issues in the past. It wouldn't
let you insert a keyframe even though you explicitly used an operator
to do so.
In order to be clearer what options are used where, the user preferences
have been reordered.
By default "Only Insert Needed" will be enabled for auto-keying, but not for manual keying.
The versioning code will enable both if it was enabled previously.
# Code side changes
The keying system has flags that define the behavior
when keys are inserted. Some of those flags were shared
between keying and auto-keying. Some were only used for
auto-keying.
To clarify that, prefix flags that used exclusively in one or the other
system with `AUTOKEY`/`MANUALKEY`
Also the flag name on the user preferences and the tool settings was renamed.
Previously it was called `autokey_flag`. To indicated that it is not only used
for autokeying, rename it `keying_flag`.
Fixes: #73773
Pull Request: https://projects.blender.org/blender/blender/pulls/115525
The previous commit introduced a new `RPT_()` macro to translate
strings which are not tooltips or regular interface elements, but
longer reports or statuses.
This commit uses the new macro to translate many strings all over the
UI.
Most of it is a simple replace from `TIP_()` or `IFACE_()` to
`RPT_()`, but there are some additional changes:
- A few translations inside `BKE_report()` are removed altogether
because they are already handled by the translation system.
- Messages inside `UI_but_disable()` are no longer translated
manually, but they are handled by a new regex in the translation
system.
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Pull Request: https://projects.blender.org/blender/blender/pulls/116804
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Snap to geometry is not supported when moving camera in camera view.
This is because the camera would make jumps that would be difficult to
predict and control.
The same happens if Snap Base were supported.
Therefore, disable Edit Snap Base when transforming camera into camera
view.
Discussed in #114646.
This commit transforms the "alt_navigation" option of the transform
operators into a new modal key item. "PASSTHROUGH_NAVIGATE"
In addition to cleaning up a lot of the code, it allows you to
customize the key chosen to navigate while transforming.
This adds the keybindings, menu, and functionally for the edit mode transform operators to grease pencil v3.
The transform operation include:
* translate, rotate, scale, change opacity, change radius
Pull Request: https://projects.blender.org/blender/blender/pulls/111836
Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
No functional changes
The following functions have been moved
`autokeyframe_cfra_can_key`
`autokeyframe_object`
`ED_autokeyframe_object`
`ED_autokeyframe_pchan`
`ED_autokeyframe_property`
they are all in a new file
keyframing_auto.cc
while the declarations are in
ANIM_keyframing.cc
The autokeyframe makros also have been moved
Pull Request: https://projects.blender.org/blender/blender/pulls/113607
There are a couple of functions that create rna pointers. For example
`RNA_main_pointer_create` and `RNA_pointer_create`. Currently, those
take an output parameter `r_ptr` as last argument. This patch changes
it so that the functions actually return a` PointerRNA` instead of using
the output parameters.
This has a few benefits:
* Output parameters should only be used when there is an actual benefit.
Otherwise, one should default to returning the value.
* It's simpler to use the API in the large majority of cases (note that this
patch reduces the number of lines of code).
* It allows the `PointerRNA` to be const on the call-site, if that is desired.
No performance regression has been measured in production files.
If one of these functions happened to be called in a hot loop where
there is a regression, the solution should be to use an inline function
there which allows the compiler to optimize it even better.
Pull Request: https://projects.blender.org/blender/blender/pulls/111976
"Auto Keying On" display now respects users MINI_AXIS preferences (default, minimal, none), as well as the navigation (en)disable option. No more text overlapping.
Co-authored-by: Abhinav Chennubhotla
Pull Request: https://projects.blender.org/blender/blender/pulls/111356
