With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
When dropping file to sequencer timeline, coordinates for strip position
and overlap handling are used even if not set.
Reset internal state in on_drag_start callback and set is_modal
variable only if coordinates are updated. This way when dragging file
from external file browser, strip is added at current frame as before
modal operator was implemented.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D15333
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
Use function `sequence_editor.display_stack(meta_strip)` to set
displayed timeline content.
To view top-level timeline, that does not belong to any meta strip, pass
`None` as argument.
Differential Revision: https://developer.blender.org/D12048
When input file is changed, `orig_height` and `orig_width` fields are
reset, which causes thumbnail dimensions to be incorrectly calculated.
Only draw thumbnails if both mentioned fields are non 0.
Function `SEQ_transform_seqbase_shuffle_time` did not have access to
strip effects, and therefore could not handle their animation. Since
now transformation knows what strips can't be directly moved, but their
position depends on other strips, this collection of strips is passed as
argument, so animation can be offset correctly.
Caused by oversight in 7afcfe111a - code relied on fact, that strip
boundary holds old value until updated.
Calculate new offsets based on stored orignal offsets.
This patch makes it possible to manipulate strips without need to use
update functions to recalculate effect and meta strips.
Prior to this change function `SEQ_time_update_sequence` had to be used
to update mainly effects and meta strips. This was implemented in a way
that relied on sorted list of strips, which can't always be done and in
rare cases this approach failed.
In case of meta strips, `seqbase` had to be passed and compared with
"active" one to determine whether meta strip should be updated or not.
This is especially weak system that is prone to bugs when functions are
used by python API functions.
Finally, other strip types had startdisp` and `enddisp` fields updated
by this function and a lot of code relied on these fields even if strip
start, length and offsets are available. This is completely
unnecessary.
Implemented changes:
All effects and meta strips are updated when strip handles are moved or
strip is translated, without need to call any update function.
Function `SEQ_time_update_sequence` has been split to
`SEQ_time_update_meta_strip_range` and
`seq_time_update_effects_strip_range`. These functions should be only
used within sequencer module code. Meta update is used for versioning,
which is only reason for it not being declared internally.
Sequence fields `startdisp` and `enddisp` are now only used for
effects to store strip start and end points. These fields should be
used only internally within sequencer module code.
Use function `SEQ_time_*_handle_frame_get` to get strip start and end
points.
To update effects and meta strips with reasonable performance, cache
for "parent" meta strip and attached effects is added to
`SequenceLookup` cache, so it shares invalidation mechanisms.
All caches are populated during single iteration.
There should be no functional changes.
Differential Revision: https://developer.blender.org/D14990
To clarify term still frame: This is portion of strip that displays
static image. This area can exist before or after strip movie content.
Still frames were implemented as strip property, but this was never
displayed in panel. Only way to set still frames was to drag strip
handle with mouse or using python API. This would set either
`seq->*still` or `seq->*ofs` where * stands for `start` or `end`.
When strip had offset, it can't have still frames and vice versa, but
this had to be enforced in RNA functions and everywhere in code where
these fields are set directly. Strip can not have negative offset or
negative number of still frames.
This is not very practical approach and still frames can be simply
implemented as applying negative offset. Merging these offsets would
simplify offset calculations for example in D14962 and could make it
easier to also deprecate usage `seq->*disp` and necessity to call
update functions to recalculate strip boundaries.
For users only functional change is ability to set negative strip offset
using property in side panel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14976
Issue was caused by treating such strip as meta and using
`seq->channels` directly, which is not valid for scene strips.
Pointer to channels is now provided by function
`SEQ_get_seqbase_from_sequence`.
Actually, delete the strip only deletes the container, but not the linked data. This patch adds the option to delete the scene also. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97683
Differential Revision: https://developer.blender.org/D14794
This operator allows to add a new scene at the same time that the strip. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97678
Differential Revision: https://developer.blender.org/D14790
Recent cleanups 9a8669ac81 and 1c790555a0
incorrectly interpereted the bitfield width syntax as a default
value. Also resolve two other compilation warnings.
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
This patch adds the drag and drop strip previews in the VSE.
It also adds two new functions to the drag and drop API.
1. "draw_in_view" for callbacks that wants to draw elements in local viewport coordinates
2. "on_drag_start" that can be used for prefetching data only once at the start of the drag.
Reviewed By: Julian, Campbell
Differential Revision: http://developer.blender.org/D14560
