Simply disable advanced 're-use current blend data` process when loading
a memfile step and Global Undo is disabled, since there is no way to
ensure we have a proper 'differential' state in the stack then.
NOTE: this is a quick work-around to fix the crash, not a satisfying
solution by far (pretty sure there can still be crashes if you then
re-enable Global Undo afterwards e.g.).
Reflection
Anisotropic is not really supported in Eevee, but since code looks like
it is just intended to make it behave like glossy, it should function
like it too.
Seems like the internal calling from `node_bsdf_glossy` from
`node_bsdf_anisotropic` has swapped arguments.
Also: ssr_id is available for SH_NODE_BSDF_ANISOTROPIC as well (see
`ntree_tag_bsdf_cb`), so why not use it?
Maniphest Tasks: T84658
Differential Revision: https://developer.blender.org/D10547
Click detection logic relied on the event queue not accumulating events
as newly added events at the end of the queue adjusted
`wm->eventstate->prev{val/type}` which was then compared with events
at the front of the queue.
This made Ctrl-Click fail to detect the click as releasing Ctrl
set the previous value before the previous event was handled.
In practice this only happened in heavy scenes,
updating 10 fps or lower. It also made automated tests fail that
accumulate events before handling them.
This makes event's prevval and prevtype usable for events in the queue.
Previously they were unused, except as a hack for modal keymap handling.
This is needed to fix T86116, where the `wm->eventstate->prev{val/type}`
are set to values from events that have not been processed.
Currently the intended behavior regarding prevval/prevtype isn't
handled consistently. However, including cursor motion causes events
in `wm->queue` and `wm->eventstate` to behave differently,
where `wm->eventstate` ignores motion (necessary for click detection).
This makes checks from `wm->eventstate` to events in the queue fail.
This reverts 39919e3532,
using the `event.type` instead of it's previous type.
This works as it includes mouse button release events.
When polygons around a bevel are rebuilt, sometimes UVs are merged
around a new vertex in the case of the face opposite a single edge
being beveled on a 3-edge vertex. This should not have been done
if any of the edges at that vertex were a seam.
Triangulating ngons could fail with the method that was being
used: projecting along the dominant normal axis and then using CDT.
It could fail if the ngon has self crossings or might be so after
the described projection.
Switched to using projection along the normal itself, and also to
using polyfill which produces some kind of triangulation no matter
what in such circumstances. This will also likely be faster if
there are a lot of ngons in the meshes, since the exact arithmetic
CDT was being used before, and now float arithmetic is used.
When a GP object was parented to e.g. a bone, box selection as well as
point selection were broken in that the selection from the user would
not correlate with what was actually being selected.
The issue was that box and point selection did not use the active
evaluated stroke data. The fix uses the correct data.
Reviewed By: antoniov
Maniphest Tasks: T85987
Differential Revision: https://developer.blender.org/D10555
This patch adds an output field to the Attribute Proximity node and
renames the existing string socket from "Result" to "Distance".
- The "Distance" output contains distance to the closest position
on the Target geometry.
- The new "Location" output contains the coordinates of the closest
position on the Target geometry.
A basic use case for this data is a simple shrinkwrap operation.
Differential Revision: https://developer.blender.org/D10415
Tools can cache data related to the mesh topology for later use. This
data is indexed by vertex index, so it will be invalid after dyntopo
changes the topology during the stroke.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10550
This patch adds manifest parsing to Cryptomatte. Normally when loading
cryptomatte layer from an OpenEXR file the manifest contains data to
convert a hash to its original name of the object/material. In the
future we want to use this to support lookup of cryptomatte
hashes and show it to the user.
Currently this logic isn't available to users (for now), but is required
by D3959 where a new cryptomatte workflow is implemented.
Fill only if it never comes in contact with an edge. It is better not to fill than to fill the entire area, as this is confusing for the artist.
Differential Revision: https://developer.blender.org/D10536
Render previews for Action datablocks by rendering the scene camera with
the Workbench (solid) engine. The //look// can be configured by setting
the scene's render engine to Workbench and editing the scene's shading
properties.
It is assumed that the pose has already been applied and that the scene
camera is capturing the pose. In other words, the render function just
renders from the scene camera without evaluating/applying the Action
stored in `preview->id`. The ID is only used to determine its type and
to store the resulting preview.
Not all code paths that lead to the `action_preview_render()` function
actually provide a depsgraph. The "Refresh Asset Preview" button
(`ED_OT_lib_id_generate_preview`) does, but `WM_OT_previews_ensure` does
not.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10543
When a lot of libraries or linked IDs were missing/not found when
loading a .blend file, Blender used to show one warning report for each
missing item, potentially covering the user's screen with a giant
unuable popup.
Now it will instead generate a single warning with amount of missing lib
files and linked IDs. Each missing item is still reported individually,
but only as `INFO`, so it will still show up in the console or Info editor.
Undo/redo was crashing & asserting.
There ware two bugs:
- Entering particle system edit-mode requires an evaluated depsgraph.
- The active object could get out of sync when undo/redo
moves between different modes.
The new test 'view3d_mesh_particle_edit_mode_simple'
in `tests/ui_simulate/test_undo.py` exposes both issues.
"Shift to parent" does not make any sense for collections since they
don't have parenting like objects. This commit just adds a simple check
for whether the first drag ID is an object before displaying
that part of the message.
Differential Revision: https://developer.blender.org/D10203
The Purge operator to remove unused IDs can now also remove 'indirectly
unused' data-blocks (those only used by unused ones, recursively).
It can also now only operate on linked, or on local data.
All those options are exposed in the `File -> Cleanup` main menu.
The behavior of the `Purge` button in the Outliner remains unchanged,
needs some UI/UX design task for that.
This API function can now purge recursively in a single call, and choose
to ignore (not purge) local or linked IDs.
Default behavior (with not argument) remains unchanged, so no API
breackage here.
This was rather obscure and non-critical issue, but in some cases ID
usercount of some deleted IDs from batch-deletion code would not be
properly nullified, which would then assert later in actual deletion
code.
With the option to detect orphaned data recursively (i.e. if ID `a` is the
only user of ID `b`, and ID `a` is unused, ID `b` will also get tagged
as unused).
To be used by the Purge operation.
Previously the padding size and the width saved for the icon were
constant regardless of the zoom level. This resulted in overlapping
icons and text, and ugly padding with more extreme zoom levels.
We can retrieve the size of the row from the `rect` argument.
An error doesn't make sense in these situations because we don't expect
to find attributes on empty geometry, and an empty geometry set is a
valid situation.
Note that we can't use `component.is_empty` here, because often the
component is visually "empty" but still has a point cloud with no
points or a mesh with no vertices.
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
