Fix unreported: Resize with Constrain To Bounds will now limit one shared scale
value for both U and V instead of calculating separate scale values for each.
To fix T98061, the individual origins (transdata->center) is now used when
that mode is active.
See also: 0e9367fc29
Differential Revision: https://developer.blender.org/D15420
The goal of this change is to fix an increasing bottleneck of the event
queue handling when there is an operator bound to a key press event and
is taking longer to finish than a key-repeat speed on the system.
Practical example of when it happens is the marker tracking operator in
a single-frame track mode. Quite often artists will hold down Alt-arrow
to track a segment of footage which seems trivial to track. The issue
arises when the Alt-arrow is released: prior to this change it is was
possible that more frames will be tracked. It also seems that redraws
are less smooth.
It is a bit hard to make easily shareable computer-independent test
case. Instead, a synthetic case can be reproduced by adding a 50 ms
sleep in the `text_move_exec()`. In such synthetic case open a long
text in the text editor and hold left/right arrow button to navigate
the cursor. The observed behavior is that seemingly redraws happen
less and less often and cursor travels longer and longer distances
between redraws. The cursor will also keep moving after the buttons
has been released.
The proposed solution is to ignore sequential key-press events from
being added to the event queue. This seems to be the least intrusive
and the most safe approach:
- If the operator is fast enough there will be no multiple press events
in the queue in both prior and after of this change.
- If the operator is slow enough, clicking the button multiple times
(i.e. clicking arrow button 3 times in a heavy shot will change the
scene frame by exactly 3 frames because no events are ignored in
this case).
- Only do it for key press events, keeping mouse and tabled behavior
unchanged which is crucial for the paint mode.
Note that this is a bit different from the key repeat tracking and
filtering which is already implemented for keymaps as here we only want
to avoid the event queue build-up and do want to ignore all repeat
events. In other words: we do want to handle as many key presses as the
operator performance allows it without clogging anything.
A possible extension to this change could be a key press counter, so
that instead of ignoring the event we merge it into the last event in
the queue, incrementing some counter. This way if some operator really
needs to know exact number of key repeats it can still access it.
Differential Revision: https://developer.blender.org/D15444
For bit counts that were exact multiple of block size, the macro was
computing one block too much.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
In preparation for a larger change (D14162), some BLI_bitmap
functionality that could be submitted separately:
- Ability to declare a fixed size bitmap by-value, without extra
memory allocation: BLI_BITMAP_DECLARE
- Function to find the index of lowest unset bit:
BLI_bitmap_find_first_unset
- Test coverage of the above.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
Use const pointers to ImageSaveOptions and ImageFormatData for API
parameters where appropriate.
Differential Revision: https://developer.blender.org/D15400
It was smart enough to check if the buffer had the right
size but neglected to cast to a 64 bit value so it
overflowed.
Differential Revision: https://developer.blender.org/D15457
Reviewed By: brecht
We would first invoke the dragging, and then set the drag data (like the
ID or the dragged modifier), so the `wmDropBox.on_drag_start()` handler
wouldn't be able to access this. This broke dragging some IDs from the
Outliner, noticed in D15333.
It's now possible to first create/request drag data, extend it, and then
invoke the actual dragging. The normal function to start dragging
returns `void` now instead of `wmDrag *`, so the drag data can't easily
be modified after starting anymore.
The Difference Matte and RGB To BW nodes have a wrong output type. They
should be floats but are of type color.
This is a regression that was introduced during the migration to the
socket builder API in D13266.
Reviewed By: Blendify, fclem
Differential Revision: https://developer.blender.org/D15232
As part of a larger change (https://developer.blender.org/D14162),
adding more test coverage for existing functionality separately.
New tests:
- ids_sorted_by_default
- ids_sorted_by_default_with_libraries
- name_too_long_handling
- create_equivalent_numeric_suffixes
- zero_suffix_is_never_assigned
- remove_after_dup_get_original_name
- name_number_suffix_assignment
- renames_with_duplicates
- names_are_unique_per_id_type
Using geometry nodes with attributes on a curve object and changing the
output is crashing. This is because the `render_mutex` in the curve
drawing cache is cleared after changes in `curves_batch_cache_init` and
set to null. The cache isn't actually needed currently because all draw
updates are single-threaded, but the new `drw_attributes_merge` function
still tries to access it (this seems to be tolerated on Linux platforms
but crashes on Windows).
Make sure the render_mutex is always initialized after (re-)initializing
the cache.
Many menus get their labels exported to the .po file, but then are not actually translated in the UI.
Before:
{F13283752}
After:
{F13283750}
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15417
Rename and refactor several F-curve key manipulation functions, and move
them from `editors` to `blenkernel`.
The functions formerly known as `delete_fcurve_key`,
`delete_fcurve_keys`, and `clear_fcurve_keys` have been moved from
`ED_keyframes_edit.h` to `BKE_fcurve.h` and have been renamed according
to hierarchical naming rules.
Below is a table of the naming changes.
| From | To |
| -- | -- |
| `delete_fcurve_key(fcu, index, do_recalc)` | `BKE_fcurve_delete_key(fcu, index)` |
| `delete_fcurve_keys(fcu)` | `BKE_fcurve_delete_keys_selected(fcu)` |
| `clear_fcurve_keys(fcu)` | `BKE_fcurve_delete_keys_all(fcu)` |
| `calchandles_fcurve()` | `BKE_fcurve_handles_recalc()` |
| `calchandles_fcurve_ex()`| `BKE_fcurve_handles_recalc_ex()` |
The function formerly known as `delete_fcurve_key` no longer takes a
`do_fast` parameter, which determined whether or not to call
`calchandles_fcurve`. Now, the responsibility is on the caller to run
the new `BKE_fcurve_handles_recalc` function if they have want to
recalculate the handles.
In addition, there is now a new static private function called
`fcurve_bezt_free` which sets the key count to zero and frees the key
array. This function is now used in couple of instances of functionally
equivalent code. Note that `BKE_fcurve_delete_keys_all` is just a
wrapper around `fcurve_bezt_free`.
This change was initially spurred by the fact that `delete_fcurve_keys`
was improperly named; this was a good opportunity to fix the location
and naming of a few of these functions.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15282
Some operator titles were not translated in the quick favorites menu.
Before:
{F13283724}
After:
{F13283725}
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15416
Fundamental issue is that the attribute api returns none, because
the custom data api returns null for a layer when the size of 0.
This should be improved separately.
3D text included checks for escape codes such as \n\r\b which have not
been included in wmEvent.ascii since [0] (2009).
Remove these and use more straightforward logic for overriding the
events text input.
[0] 66437a62a7
- Remove references to `ISTEXTINPUT` as any keyboard event with it's
utf8_buf set can be handled as text input.
- Update references to the key repeat flag.
The `ascii` member was only kept for historic reason as some platforms
didn't support utf8 when it was first introduced.
Remove the `ascii` struct members since many checks used this as a
fall-back for utf8_buf not being set which isn't needed.
There are a few cases where it's convenient to access the ASCII value
of an event (or nil) so a function has been added to do that.
*Details*
- WM_event_utf8_to_ascii() has been added for the few cases an events
ASCII value needs to be accessed, this just avoids having to do
multi-byte character checks in-line.
- RNA Event.ascii remains, using utf8_buf[0] for single byte characters.
- GHOST_TEventKeyData.ascii has been removed.
- To avoid regressions non-ASCII Latin1 characters from GHOST are
converted into multi-byte UTF8, when building X11 without
XInput & X_HAVE_UTF8_STRING it seems like could still occur.
New remapper code would also fail in some cases when remapping
libraries, similar to the issue yesterday, because ID_LI type had no
mask value.
That would fail to remap `parent` member of a library to NULL when
deleting that parent, leading to a crash e.g. in Outliner tree building
code.
Reported by @JulienKaspar from Blender studio.
This patch updates the documentation for arguments regarding the `Gizmo`
type.
- Corrected `select_id` doc for draw_preset_ functions. `-1` indicates
that no selection ID is to be written, but previous docs incorrectly
specified `0` instead.
- Added missing doc for `target` argument for `target_set_handler`
function.
Reviewed by: Aaron Carlisle (Blendify)
Differential Revision: https://developer.blender.org/D14834
This patch allows new GizmoGroup classes to support tool fallback keymap.
With this patch, when new gizmo groups add `'TOOL_FALLBACK_KEYMAP'` to
its `bl_options`, the fallback tools are added to the group. This
allows a `WorkSpaceTool` (for example) to have selection be a fallback
tool if the user LeftMouse drags away from other gizmos in the group.
Reviewed by: Campbell Barton (campbellbarton)
Differential Revision: https://developer.blender.org/D15154
This commit exposes snap options in transform operators. These options
are needed for Python tools to control snapping without requiring the
tool settings to be adjusted.
The newly exposed options are:
- `snap_elements` for choosing which element(s) of target the source
geometry should snap to (ex: Face Raycast).
- `use_snap_self`, `use_snap_edit`, `use_snap_nonedit`,
`use_snap_selectable_only` for controlling target selection.
- `use_snap_project` for controlling Face Raycast snapping.
- `use_snap_to_same_target` and `snap_face_nearest_steps` for
controlling Face Nearest snapping.
Reviewed by: Campbell Barton (campbellbarton)
Differential Revision: https://developer.blender.org/D15398
The problem was the new generated strokes were copied from original and the location was offset to mirror, but the internal geometry data was not updated and the collision check done by brushes was not working.
Now, the internal geometry data is recalculated when the modifier is applied.
Not clearing runtime remapping data for the new ID as well as the old
one can lead to false stale data there, wichi could e.g. make indirectly
linked data be tagged as directly linked.
This would generate an error report on file write when hapening on
ShapeKey ID, since that type is not allowed to be directly linked.
