Recently a new geometry node for splitting edges was added in D16399.
However, there was already a similar implementation in mesh.cc that was
mainly used to fake auto smooth support in Cycles by splitting sharp
edges and edges around sharp faces.
While there are still possibilities for optimization in the new code,
the implementation is safer and simpler, multi-threaded, and aligns
better with development plans for caching topology on Mesh and other
recent developments with attributes.
This patch removes the old code and moves the node implementation to
the geometry module so it can be used in editors and RNA. The "free
loop normals" argument is deprecated now, since it was only an internal
optimization exposed for Cycles.
The new mesh `editors` function creates an `IndexMask` of edges to
split by reusing some of the code from the corner normal calculation.
This change will help to simplify the changes in D16530 and T102858.
Differential Revision: https://developer.blender.org/D16732
Migrate (some) of the UDIM offset calculation from inside one
of the packing engines (where it's consumed) to the packing
operator (where it's produced).
This change (and others) will help simplify the future migration
of the packing engine inside editors/uvedit/uvedit_islands.cc
to the Geometry module, so it can eventually replace the other
packing engine in geometry/intern/uv_parametrizer.cc
This patch adds an integer identifier to nodes that doesn't change when
the node name changes. This identifier can be used by different systems
to reference a node. This may be important to store caches and simulation
states per node, because otherwise those would always be invalidated
when a node name changes.
Additionally, this kind of identifier could make some things more efficient,
because with it an integer is enough to identify a node and one does not
have to store the node name.
I observed a 10% improvement in evaluation time in a file with an extreme
number of simple math nodes, due to reduced logging overhead-- from
0.226s to 0.205s.
Differential Revision: https://developer.blender.org/D15775
When entering paint modes the paint pivot was cleared,
which broken rotate around pivot. Fixed for all paint modes.
PBVH modes set the pivot to the PBVH bounding box
while texture paint uses the evaluated mesh bounding box.
As part of T95966, this patch moves loose edge information out of the
flag on each edge and into a new lazily calculated cache in mesh
runtime data. The number of loose edges is also cached, so further
processing can be skipped completely when there are no loose edges.
Previously the `ME_LOOSEEDGE` flag was updated on a "best effort"
basis. In order to be sure that it was correct, you had to be sure
to call `BKE_mesh_calc_edges_loose` first. Now the loose edge tag
is always correct. It also doesn't have to be calculated eagerly
in various places like the screw modifier where the complexity
wasn't worth the theoretical performance benefit.
The patch also adds a function to eagerly set the number of loose
edges to zero to avoid building the cache. This is used by various
primitive nodes, with the goal of improving drawing performance.
This results in a few ms shaved off extracting draw data for some
large meshes in my tests.
In the Python API, `MeshEdge.is_loose` is no longer editable.
No built-in addons set the value anyway. The upside is that
addons can be sure the data is correct based on the mesh.
**Tests**
There is one test failure in the Python OBJ exporter: `export_obj_cube`
that happens because of existing incorrect versioning. Opening the
file in master, all the edges were set to "loose", which is fixed
by this patch.
Differential Revision: https://developer.blender.org/D16504
Introduces a new `AssetRepresentation` type, as a runtime only container
to hold asset information. It is supposed to become _the_ main way to
represent and refer to assets in the asset system, see T87235. It can
store things like the asset name, asset traits, preview and other asset
metadata.
Technical documentation:
https://wiki.blender.org/wiki/Source/Architecture/Asset_System/Back_End#Asset_Representation.
By introducing a proper asset representation type, we do an important
step away from the previous, non-optimal representation of assets as
files in the file browser backend, and towards the asset system as
backend. It should replace the temporary & hacky `AssetHandle` design in
the near future. Note that the loading of asset data still happens
through the file browser backend, check the linked to Wiki page for more
information on that.
As a side-effect, asset metadata isn't stored in file browser file
entries when browsing with link/append anymore. Don't think this was
ever used, but scripts may have accessed this. Can be brought back if
there's a need for it.
In anticipation of UV Copy+Paste, we need fast access to indices
of unique UvElements. Can also be used to improve performance and
simplify code for UV Sculpt tools and UV Stitch.
No user visible changes expected.
Maniphest Tasks: T77911
See also: D16278
When changing the texture paint slot index or activating a Texture Node, the texture displayed in the Image Editor changes accordingly.
This patch syncs the Image Editor when a new texture paint slot was added, which currently is not the case.
Also deduplicates some code.
Use the node topology cache and avoid modifying the node tree
in a non-threadsafe way to improve the predictability of using
the helper function. Replaces the implementation from
e0d4047136.
This patch builds on the work from bdb5754147 to add node group
assets directly in the node editor add menu. Assets are added after
separators to distinguish them, but otherwise they look like any other
node. The catalog trees from all configured libraries are used to build
the menu hierarchy. Only catalogs with matching asset types are used
though.
There are a few limitations of this initial version. For now this only
supports geometry nodes. Support for other built-in node systems just
requires some refactoring of the corresponding add menu though. Lazy
loading will be added in a followup commit. For now there is a label
the first time the menu is opened.
Like the search menu integration, re-saving asset library files in 3.4
is required, if it hasn't been done already.
Implementation wise, there is a some ugly code here. A lot of that is
because the asset system isn't complete. The RNA API doesn't work well
yet, and the system isn't built to interact with multiple libraries at
once. It's also ugly because of the way we combine automatic menu
generation with builtin menus. As noted in a code comment, these two
systems could be merged completely so that the menus for builtin nodes
are also generated in the same way.
Differential Revision: https://developer.blender.org/D16135
Adds the possibility of having a little number on top of icons.
At the moment this is used for:
* Outliner
* Node Editor bread-crumb
* Node Group node header
For the outliner there is almost no functional change. It is mostly a refactor
to handle the indicators as part of the icon shader instead of the outliner
draw code. (note that this was already recently changed in a5d3b648e3).
The difference is that now we use rounded border rectangle instead of
circles, and we can go up to 999 elements.
So for the outliner this shows the number of collapsed elements of a
certain type (e.g., mesh objects inside a collapsed collection).
For the node editors is being used to show the use count for the data-block.
This is important for the node editor, so users know whether the node-group
they are editing (or are about to edit) is used elsewhere. This is
particularly important when the Node Options are hidden, which is the
default for node groups appended from the asset libraries.
---
Note: This can be easily enabled for ID templates which can then be part
of T84669. It just need to call UI_but_icon_indicator_number_set in the
function template_add_button_search_menu.
---
Special thanks Clément Foucault for the help figuring out the shader,
Julian Eisel for the help navigating the UI code, and Pablo Vazquez for
the collaboration in this design solution.
For images showing the result check the Differential Revision.
Differential Revision: https://developer.blender.org/D16284
Part of a wider set of changes to migrate UV packing from
uv_parametrizer.cc to uvedit_islands.cc.
This allows UV packing improvements including margin calculation,
correctness fixes such as support for non-manifold geometry,
and new packing algorithms including speed and quality improvements.
See for example c2256bf7f7, T82637
This change migrates UV.unwrap and Live UV Unwrap.
Differential Revision: https://developer.blender.org/D16296
- Give functions and variables more descriptive names
- Use references for arguments
- Use tree topology cache to avoid iterating over all links
- Group related code together
A refactor of the margin calculation of UV packing, in anticipation
of multiple packing methods soon becoming available.
Three margin scaling methods are now available:
* "Add", Simple method, just add the margin. [0]
(The default margin scale from Blender 2.8 and earlier.)
* "Scaled", Use scale of existing UVs to multiply margin.
(The default from Blender 3.3+)
* "Fraction", a new (slow) method to precisely specify
a fraction of the UV unit square for margin. [1]
The "fraction" code path implements a novel combined search / secant
root finding method which exploits domain knowledge to accelerate
convergence while remaining robust against bad input.
[0]: Resolves T85978
[1]: Resolves T90782
Differential Revision: https://developer.blender.org/D16121
Used in action_select to refactor the selection operators.
No functional changes.
Reviewed By: Sybren A. Stüvel
Differential Revision: http://developer.blender.org/D16168
Using 'short' was historic (as the value was stored in the Base).
Prefer floats which allow sub-pixel distances to be differentiated.
Also remove IS_CLIPPED assignment as this only made sense when the
values were stored in the Base, without any other ways to check
if projection failed.
Historically, caching these values may have had some advantages,
simplifying drawing object centers and selecting by object center.
Now the only uses of these values would calculate the projection
before use, so there is no reason to store run-time projection in DNA.
This also quiets a `-Wstring-overflow` warning.
Two new normal-based automasking modes.
The first mode, "brush", compares vertex normals with the initial
normal at the beginning of the brush stroke.
The second, "view", compares vertex normals with the view normal.
If "occlusion" is on then rays will be shot from each vertex to test
if it is occluded by other geometry (note: this can be very slow).\
Only geometry inside the sculpt mesh is considered.
Each mode has an associated angular limit and a falloff.
Reviewed by: Julien Kaspar and Jeroen Bakker
Differential Revision: https://developer.blender.org/D15297
Ref D15297
This adds support for showing geometry passed to the Viewer in the 3d
viewport (instead of just in the spreadsheet). The "viewer geometry"
bypasses the group output. So it is not necessary to change the final
output of the node group to be able to see the intermediate geometry.
**Activation and deactivation of a viewer node**
* A viewer node is activated by clicking on it.
* Ctrl+shift+click on any node/socket connects it to the viewer and
makes it active.
* Ctrl+shift+click in empty space deactivates the active viewer.
* When the active viewer is not visible anymore (e.g. another object
is selected, or the current node group is exit), it is deactivated.
* Clicking on the icon in the header of the Viewer node toggles whether
its active or not.
**Pinning**
* The spreadsheet still allows pinning the active viewer as before.
When pinned, the spreadsheet still references the viewer node even
when it becomes inactive.
* The viewport does not support pinning at the moment. It always shows
the active viewer.
**Attribute**
* When a field is linked to the second input of the viewer node it is
displayed as an overlay in the viewport.
* When possible the correct domain for the attribute is determined
automatically. This does not work in all cases. It falls back to the
face corner domain on meshes and the point domain on curves. When
necessary, the domain can be picked manually.
* The spreadsheet now only shows the "Viewer" column for the domain
that is selected in the Viewer node.
* Instance attributes are visualized as a constant color per instance.
**Viewport Options**
* The attribute overlay opacity can be controlled with the "Viewer Node"
setting in the overlays popover.
* A viewport can be configured not to show intermediate viewer-geometry
by disabling the "Viewer Node" option in the "View" menu.
**Implementation Details**
* The "spreadsheet context path" was generalized to a "viewer path" that
is used in more places now.
* The viewer node itself determines the attribute domain, evaluates the
field and stores the result in a `.viewer` attribute.
* A new "viewer attribute' overlay displays the data from the `.viewer`
attribute.
* The ground truth for the active viewer node is stored in the workspace
now. Node editors, spreadsheets and viewports retrieve the active
viewer from there unless they are pinned.
* The depsgraph object iterator has a new "viewer path" setting. When set,
the viewed geometry of the corresponding object is part of the iterator
instead of the final evaluated geometry.
* To support the instance attribute overlay `DupliObject` was extended
to contain the information necessary for drawing the overlay.
* The ctrl+shift+click operator has been refactored so that it can make
existing links to viewers active again.
* The auto-domain-detection in the Viewer node works by checking the
"preferred domain" for every field input. If there is not exactly one
preferred domain, the fallback is used.
Known limitations:
* Loose edges of meshes don't have the attribute overlay. This could be
added separately if necessary.
* Some attributes are hard to visualize as a color directly. For example,
the values might have to be normalized or some should be drawn as arrays.
For now, we encourage users to build node groups that generate appropriate
viewer-geometry. We might include some of that functionality in future versions.
Support for displaying attribute values as text in the viewport is planned as well.
* There seems to be an issue with the attribute overlay for pointclouds on
nvidia gpus, to be investigated.
Differential Revision: https://developer.blender.org/D15954
Now it's possible to set an offset in the surface reprojection.
Before, this was only possible while drawing, but not in the
reproject operator.
Differential Revision: https://developer.blender.org/D15610
For example, allows a custom UV grid size of 4 x 12.
TODO: Fix snapping with custom UV grid sizes.
Manifest Tasks: T78391
Differential Revision: https://developer.blender.org/D16000
Currently node group assets are supported, but using them by dragging
from the asset browser is cumbersome. This patch adds all node group
assets from user asset libraries and the current file libraries to the
add node search menu and the link drag search menu.
Node groups added through the search will have their "options" hidden,
meaning the data-block selector is displayed. This helps keep the UI
clean, and the selector shouldn't be necessary anyway.
To make that possible, metadata like the node tree type and its inputs
and outputs has to be saved in the file. This requires re-saving the
files that contain the assets with the patch applied.
The node add search operator is moved from Python to C++ to ease
development and allow more flexibility. It supports a tooltip that
gives the description of assets.
Currently the node groups are added with the asset system's existing
"Append & Reuse" behavior. It's likely that linking should be possible
in the future too, but for now the idea is to use the more foolproof
option that doesn't create dependencies between files.
Because loading assets can potentially take a long time, the search
menu refreshes its items as new assets are loaded. However, changing
the search field is necessary to see the update.
Differential Revision: https://developer.blender.org/D15568
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
