Expands Color Mix nodes with new Exclusion mode.
Similar to Difference but produces less contrast.
Requested by Pierre Schiller @3D_director and
@OmarSquircleArt on twitter.
Differential Revision: https://developer.blender.org/D16543
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
These were redundant for one of a few reasons:
- A call to `BKE_mesh_tag_coords_changed` was correct instead
- A mesh has dirty normals when created from scratch anyway
- The call was redundant with `BKE_mesh_runtime_clear_geometry`
Function casts hid casting between potentially incompatible type
signatures (using int instead of Py_ssize_t). As it happens this seems
not to have caused any bugs on supported platforms so this change is
mainly for correctness and to avoid problems in the future.
Missed these changes in [0].
Also replace designated initializers in some C code, as it's not used
often and would need to be removed when converting to C++.
[0] e555ede626
Use struct identifiers in comments before the value.
This has some advantages:
- The struct identifiers didn't mix well with other code-comments,
where other comments were wrapped onto the next line.
- Minor changes could re-align all other comments in the struct.
- PyVarObject_HEAD_INIT & tp_name are no longer placed on the same line.
Remove overly verbose comments copied from PyTypeObject (Python v2.x),
these aren't especially helpful and get outdated.
Also corrected some outdated names:
- PyTypeObject.tp_print -> tp_vectorcall_offset
- PyTypeObject.tp_reserved -> tp_as_async
Render stored a shallow copy of the scene view layers and views for thread
safety, without proper functions to free it. But with the CoW depsgraph this
scene is already a copy of the original and an additional copy is not needed.
Refactor to use the scene view layers and some other settings directly instead
of making a copy.
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
Recent refactoring to use uint relied on indirect includes and precompiled
headers for uint to be defined. Explicitly include BLI_sys_types where this
type is used now.
These functions are almost identical, the main difference being
BLI_join_dirfile didn't trim existing slashes when joining paths
however this isn't an important difference that warrants a separate
function.
Problem here was that layer_collection_objects_sync wasn't called when
the holdout property is updated due to frame change, so the changed
visibility flag was never applied to ob->base_flag.
Turns out there's no real reason to handle the per-object holdout
property through the layer system. So, instead of merging both the
layer holdout and object holdout into base_flag and checking that
from the render engines, only handle the layer holdout (which can't
be animated, so no issue here) through base_flag and explicitly also
check the object holdout in the render engines.
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
Replace `mesh_attributes`, `mesh_attributes_for_write` and the point
cloud versions with methods on the `Mesh` and `PointCloud` types.
This makes them friendlier to use and improves readability.
Differential Revision: https://developer.blender.org/D15907
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d. This aligns better with
existing naming where the shorter names are much more common.
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
Add a dedicated `owner_id` pointer to ID types that can be embedded
(Collections and NodeTrees), and modify slightly come code to make
handling those more safe and consistent.
This implements first part of T69169.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15838
Leading to excessive memory usage compared to Blender 2.93. There's still
some avoidable memory usage remaining, due to the full float buffer in the
new image editor drawing and not loading the cached EXR from disk in tiles.
Main difficulty was handling multi-image baking and disk caches, which is
solved by associating a unique layer name with each image so it can be
matched when reading back the image from the disk.
Also some minor header changes to be able to use RE_MAXNAME in RE_bake.h.
This patch moves material indices from the mesh `MPoly` struct to a
generic integer attribute. The builtin material index was already
exposed in geometry nodes, but this makes it a "proper" attribute
accessible with Python and visible in the "Attributes" panel.
The goals of the refactor are code simplification and memory and
performance improvements, mainly because the attribute doesn't have
to be stored and processed if there are no materials. However, until
4.0, material indices will still be read and written in the old
format, meaning there may be a temporary increase in memory usage.
Further notes:
* Completely removing the `MPoly.mat_nr` after 4.0 may require
changes to DNA or introducing a new `MPoly` type.
* Geometry nodes regression tests didn't look at material indices,
so the change reveals a bug in the realize instances node that I fixed.
* Access to material indices from the RNA `MeshPolygon` type is slower
with this patch. The `material_index` attribute can be used instead.
* Cycles is changed to read from the attribute instead.
* BMesh isn't changed in this patch. Theoretically it could be though,
to save 2 bytes per face when less than two materials are used.
* Eventually we could use a 16 bit integer attribute type instead.
Ref T95967
Differential Revision: https://developer.blender.org/D15675
This patch is a response to T92588 and is implemented
as a Function/Shader node.
This node has support for Float, Vector and Color data types.
For Vector it supports uniform and non-uniform mixing.
For Color it now has the option to remove factor clamping.
It replaces the Mix RGB for Shader and Geometry node trees.
As discussed in T96219, this patch converts existing nodes
in .blend files. The old node is still available in the
Python API but hidden from the menus.
Reviewed By: HooglyBoogly, JacquesLucke, simonthommes, brecht
Maniphest Tasks: T92588
Differential Revision: https://developer.blender.org/D13749
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
With the ultimate goal of simplifying drawing and evaluation,
this patch makes the following changes and removes code:
- Use `Mesh` instead of `DispList` for evaluated basis metaballs.
- Remove all `DispList` drawing code, which is now unused.
- Simplify code that converts evaluated metaballs to meshes.
- Store the evaluated mesh in the evaluated geometry set.
This has the following indirect benefits:
- Evaluated meshes from metaball objects can be used in geometry nodes.
- Renderers can ignore evaluated metaball objects completely
- Cycles rendering no longer has to convert to mesh from `DispList`.
- We get closer to removing `DispList` completely.
- Optimizations to mesh rendering will also apply to metaball objects.
The vertex normals on the evaluated mesh are technically invalid;
the regular calculation wouldn't reproduce them. Metaball objects
don't support modifiers though, so it shouldn't be a problem.
Eventually we can support per-vertex custom normals (T93551).
Differential Revision: https://developer.blender.org/D14593
Knowing when layers are retrieved for write access will be essential
when adding proper copy-on-write support. This commit makes that
clearer by adding `const` where the retrieved data is not modified.
Ref T95842
Regression caused by [0] that caused the error message to be
created based on a normalized exception (which hid line numbers).
PyC_ExceptionBuffer{_Simple} & BPy_errors_to_report
no longer clears the exception.
This could have been resolved by changing python_script_error_jump
however that would involve changes to reference counting that are more
risky (noted in code-comment).
[0]: 2d2baeaf04
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
ViewMapIO.h is only included in Controller.cpp init_options().
However, g_models_path and g_flags set here are never used elsewhere.
Therefore, ViewMapIO files can be deleted without affecting anything.
Differential Revision: https://developer.blender.org/D14423
Resolves a fair amount of noisy warnings with default build on macOS.
Tested using render_layer render test which includes Freestyle layer.
Differential Revision: https://developer.blender.org/D14355
