make soft bodies spawn threads on a mid level
use G.rt == 16 to switch to 'old style'
i am going to remove that G.rt switch if everyone is fine /* i do not intend to keep 2 versions of code up because of "BAD STYLE" */
so .. give feed back ..
-Particles were being recalculated a bit too aggressively. Normal particles didn't care, but since reactor particles have dynamic birth times they lost crucial information in the recalculation.
-The particle dupliobjects were using the objects trackflag in combination with it's rotation causing strange behavior. Now the trackflag is ignored and only the rotation of the object being duplicated is taken into account.
* GBE Python API's alignToVect wasnt clamping the align ammount from 0.0-1.0
* Generated images arnt animated - use for a test to see if the textures animated.
animated textures
I have added a dependsOnTime function for the Displace modifier which checks
if the displacement texture has IPOs, is a plugin, or uses an animated image.
=======================================
Alpha blending + sorting was revised, to fix bugs and get it
to work more predictable.
* A new per texture face "Sort" setting defines if the face
is alpha sorted or not, instead of abusing the "ZTransp"
setting as it did before.
* Existing files are converted to hopefully match the old
behavior as much as possible with a version patch.
* On new meshes the Sort flag is disabled by the default, to
avoid unexpected and hard to find slowdowns.
* Alpha sorting for faces was incredibly slow. Sorting faces
in a mesh with 600 faces lowered the framerate from 200 to
70 fps in my test.. the sorting there case goes about 15x
faster now, but it is still advised to use Clip Alpha if
possible instead of regular Alpha.
* There still various limitations in the alpha sorting code,
I've added some comments to the code about this.
Some docs at the bottom of the page:
http://www.blender.org/development/current-projects/changes-since-246/realtime-glsl-materials/
Merged some fixes from the apricot branch, most important
change is that tangents are now exactly the same as the rest
of Blender, instead of being computed in the game engine with a
different algorithm.
Also, the subversion was bumped to 1.
* For constraint mesh-targets, the check for whether the target mesh was in EditMode didn't check to see if the target mesh was the mesh in EditMode.
Thanks jaguarandi for catching that!
* Bumped up size of buffer for grease-pencil drawing after seeing a program written in 1989 that had a 100 times larger buffer
left overs from new particles
-wind and force did not work if aero or edge collision was activated.
-force field had flipped sign compared to particles
tsk who thinks a attractive force should negative sign? well... i am passionless with that.
-adapted effect of wind and fields on softbodies such that softbody "particles" and particle "particles" behave consistently
note!
effect of wind is 1/25 compared to before
other forces 1/10
Fixes: [#17315] Sequencer: after undo there's no active object
closes: [#17357] fix for bug #17315 - Sequencer: after undo there's no active object
(kiemdoder: thanks for the patch, had to do it in a little bit different way,
since sort_seq will kill your sort order idea...)
Grease Pencil is a tool which allows you to draw freehand in some views, allowing you to annotate/scribble over the contents of that view in either 2d or 3d. This facilitates many easier communication and planning abilities.
To use, simply enable it from the View menu (choose 'Grease Pencil...' and click 'Use Grease Pencil'). Then, click+drag using the left-mouse button and the shift-key held to draw a stroke.
For more information, check the following page on the wiki:
http://wiki.blender.org/index.php/User:Aligorith/247_Grease_Pencil
Curve modifier on lattice suffered drawing updates, only when the system
was not animated though, missed depsgraph calls then.
Solved it by forcing lattice to always return displist for its vertices,
that's same as for how mesh/curve works now.
CDDM_apply_vert_coords needs a CDDerivedMesh, but it was getting a
CCGDerivedMesh from the preceding Subsurf modifier. This fix just makes
a CDDerivedMesh copy of the supplied DerivedMesh rather than using it directly.
The Image "do premul" option didn't work when Image was of type Sequence.
(Note: this option converts key-alpha images to premul, as is standard
in Blender rendering)
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
