Adopt some of the newer layout abilities to
clean up the Particle Tool Properties a bit.
- Use in-line check-boxes next to values.
- Use text heading for Preserve toggles and mirror/topology mirror.
Reads clearer. Uses less space. Is more consistent.
Reviewed By: #user_interface, pablovazquez, Blendify, campbellbarton
Ref D10130
- Rename to "Link/Transfer Data".
- Move Mesh Data Transfer operators here from the Relations sub-menu.
- Clarify which operations links to, copies or transfers/projects
data using Link, Copy and Transfer leading text.
- Re-order contents to fit each category and add separators.
- Add enum tool-tips.
Reviewed By: Blendify, campbellbarton pablovazquez, mont29
Ref D10090
Average selected tracks into the new one. This can be used to improve
stability of tracking on blurry or non-very-sharp feature shapes.
Averaging happens for all position, pattern corners and search area.
Disabled markers do not take effect on averaging. Keyframed flag is
copied from source.
Gaps in the source tracks will be linearly interpolated, to reduce
result track jump. Note that this only applies to gaps "inbetween".
This means that if an input track doesn't have markers in the
beginning/end of it, there is nothing to interpolate with and the
result track will jump.
Available from the Track panel, under the Merge category.
Differential Revision: https://developer.blender.org/D6323
overrides
Editing bone groups is not supported on proxies/overrides [changes a re
lost on file reload], need to do proper polling (and also prevent this
from rna) for:
- adding bone groups
- removing bone groups
- renaming bone groups
- setting bone groups colors
Previously, this was hinted at by setting the layout inactive, with
preoper polls, this is now not needed anymore.
note: Selection of bone groups actually makes sense here and is
supported, so this is not prevented in this patch, but UI wise this is
not nice in the override case, because one cannot set an active_index
(aka select) in the UI list.
Maniphest Tasks: T84600
Differential Revision: https://developer.blender.org/D10131
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
This adds a "Snap to" option that allows using all the scenes snap
settings which includes incremental & absolute grid snapping options.
This is optional because always following scene snapping would not
snap to geometry by default (which seems to be the most useful default).
Previously the colors were on the right for outputs, but this is now
unecessary because of the organization in separate panels after
rBb1d1a58c77fb1658.
Now the resolution can be reduced to get less details. This is very useful for doing storyboards to get a quick fill of any character.
Following UI review, the name "Resolution" has been changed to "Precision" because is more clear.
Differential Revision: https://developer.blender.org/D10076
Partially reverts 2250b5cefe.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefe. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
The Asset Browser will be disabled and not available for the 2.92 release. In
alpha/beta builds, there will be an "Asset Browser" option under Preferences >
Experimental, if the developer extras are enabled.
Note that this also disables related UI elements (e.g. "Mark Asset" buttons,
Preferences settings for asset libraries, etc.).
The code is still in master of course, development and testing will continue
there. But there simply needs to be too much polishing and fixing before the
2.92 release, plus there are some design decisions to be reevaluated.
Check the milestone 1 project to follow ongoing work:
https://developer.blender.org/project/view/124/
"F-Curve Visibility" is a bad UI label for a property that only affects
the display of unselected F-Curves. This commit clarifies the property
name by making it more specific with the word "Unselected", and by using
the word "Opacity". "F-Curve" is redundant in the UI label anyway because
it is included in the panel title.
Resolves T82587
Differential Revision: https://developer.blender.org/D10027
- Add operators that previously could only be found in panels
- Re order menus to match other menus
- Organize Code
|Before|After|
|{F9493583}|{F9493584}|
|{F9493585}|{F9493586}|
|{F9493588}|{F9493590}|
|{F9493591}|{F9493592}|
Reviewed By: sergey, sebastian_k, #motion_tracking
Differential Revision: https://developer.blender.org/D9781
This can be useful as a workaround on the boundary with the pinned
vertices in some situations among other things, and completely copies
the existing design of the self collision vertex group setting.
Differential Revision: https://developer.blender.org/D10043
The `object.collision.use` flag was treated as a redundant marker
of the existence of the modifier, going as far as adding/removing
it when the value was changed, which is not actually very useful.
Removing the modifier loses its position in the stack, and requires
a dependency graph rebuild. It feels it may be a legacy flag?
What would be useful however is the ability to toggle collisions
dynamically without removing the modifier. This patch adjusts the
code to keep the modifier when the flag is disabled, and add it
if it doesn't exist when the flag is enabled. The modifier now
checks the flag at the start and quickly exits after cleaning
up stale data. The redesigned setting is exposed in the UI.
Collisions can't be disabled by simply using the modifier enable
flags because the modifier merely saves a snapshot of the mesh at
a certain point of the modifier stack for other objects to use,
and thus has to be able to clear the stale data.
Differential Revision: https://developer.blender.org/D10064
This property was intended to affect fit method for added strips prior
to running operator. However UI team did not agree with current
implementation.
ref T84535
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D10055
All eevee scene properties are not animatable due to
`RNA_define_animate_sdna(false)` so there is no need for an animation
decorator here (would not show anyways).
Not sure if setting use_property_decorate to False and then manually
adding one again was a hack in rB7fc60bff14a6 to get the alignment
right, but seems to work good now without it.
Note: there also seems to be an inconsistency here generally:
- Eevee reserves room for an animation decorator in almost every panel
(except for "Sampling" and "Indirect Lighting") even though almost none
are animatable (except for stuff in "Hair" and "Film"). This looks nice
if multiple panels are expanded (except for mentioned "Sampling" and
"Indirect Lighting" -- maybe these should also reserve the room?)
- Cycles does not use animation decorators at all (even though pretty
much everything is animatable here -- maybe these should also use
animation decorators?)
- Then there is also the 'shared' "Grease Pencil", "Freestyle" and
"Colormanagement" -- these dont use animation decorators, but some stuff
is animatable...
Regarding the note: not sure what the guidelines here are, if this is
isolated to each panel then there is lots of stuff for eevee that could
set use_property_decorate to False, if multiple open panels are
considered (for nice visual consistency between them), then there is
romm for improvement elsewhere, too.
Maniphest Tasks: T81411
Differential Revision: https://developer.blender.org/D9164
Adjust default cache settings for all files to store raw and final
images.
All settings are still available when developer extras option is
enabled in user preferences.
This is part of design task T80278
Differential Revision: https://developer.blender.org/D9745
While using the Sample Weight tool in Weight Paint mode, user eyedropper mouse cursor.
Differential Revision: https://developer.blender.org/D9431
Reviewed by Pablo Vazquez
While using the Sample Weight tool in Weight Paint mode, show weight value in tool header.
Differential Revision: https://developer.blender.org/D9432
Reviewed by Pablo Vazquez
The property split layout was broken when the bone dialog appeared,
because the name field was not set. Theoretically property split should
work in this case, but it makes sense to use the label anyway.
Steps to reproduce:
1. Add clip to clip editor
2. Open the tracking settings & tracking settings extra panels
To fix this the sub panel is only drawn if a track is active.
The main panel will exit early and display a "No active track" message.
This is consistent with other panels in the clip editor.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9727
This value really is the opacity, or the alpha, since a value of 1.0 means
that the image is fully visible, not invisible like "full transparency"
would suggest. Mistake in rBea4d28aea0343a.
Differential Revision: https://developer.blender.org/D9920
Having a centeral place to find a list of all library overrides should be
useful for managing production scenes where library overrides are used a lot.
This change adds the individually overridden properties of a data-block under
the data-block itself. Just how we show modifiers, constraints or pose channels
there. This way we can also expose library override operations/options better
in future.
There's also a filter option for the library overrides now, so they can be
hidden. It is only available in the View Layer display mode though, like the
other filter options.
One internal change this has to do is adding more informative return values to
undo pushes and the library override functions called by it. That way we can
send a notifier when library overrides change for the Outliner to know when to
rebuild the tree.
Differential Revision: https://developer.blender.org/D7631
Reviewed by: Andy Goralczyk, Bastien Montagne, William Reynish
In some operators that previously allowed duplicating the selected data-block,
the operator would not be available now. 2250b5cefe split the "new" operators
into "new" and "delete" to allow clearly differentiating between the two. But I
apparently didn't amend all affected data-block selectors to use the added
"duplicate" operators.
I went over all operators that were split now and made sure all affected
data-block selectors are updated.
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
Mainly updated the Mantaflow version. It includes the new viscosity solver plugin based on the method from 'Accurate Viscous Free Surfaces for Buckling, Coiling, and Rotating Liquids' (Batty & Bridson).
In the UI, this update adds a new 'Viscosity' section to the fluid modifier UI (liquid domains only). For now, there is a single 'strength' value to control the viscosity of liquids.
This adds a popover to the properties editor. Currently the only setting
is for controlling outliner to properties syncing.
Because we cannot define a perfect heuristic to determine when
properties editors should change tabs based on outliner icon selection,
we need an option to enable or disable this behavior per properties
editor.
There are 3 options for controlling the syncing. Auto uses the heuristic
to only allow tab switching when a properties editor and outliner share
a border. On and off enable and disable syncing respectively.
Differential Revision: https://developer.blender.org/D9758
Normally, pure text buttons have no padding at their edges so they
align with edges of buttons, see D9058. However, in several cases
there are labels aligned to the right side of a list widget row,
so they're missing padding against the right edge.
The fix is to use emboss = 'NONE' for such labels, which changes
the drawing style, adding padding on the right edge. (Normally so
labels aligned with the text from non-embossed buttons). This is
not necessarily intended, but it works properly.
For more information, see the revision.
Differential Revision: https://developer.blender.org/D9874
