Rename BLI_make_existing_file to BLI_file_ensure_parent_dir_exists.
The previous name read as if it would make (touch) the file,
where as it ensures the directory component of the path exists.
Move from BLI_path to BLI_fileops as path utilities should only
manipulate paths and not deal with file IO creation
(this has more in common with BLI_file_touch for e.g.).
Found investigating #107420.
Steps to reproduce were:
- remove all objects from the scene
- add rigid body world
- bake
- crash
BKE_ptcache_bake would assume a cache can always be found, but with an
empty rigid body world this is not the case -- accessing flags would then
crash.
Now just check if we actually have a cache.
Pull Request: https://projects.blender.org/blender/blender/pulls/107537
Increase the buffer sizes used for `BLI_str_format_uint64_grouped` to
prevent overflow on strings representing numbers within the uint64
range. Also creates and uses defines for all the formatted string
buffer sizes.
Pull Request #105263
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
These functions are almost identical, the main difference being
BLI_join_dirfile didn't trim existing slashes when joining paths
however this isn't an important difference that warrants a separate
function.
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
The `DEG_OB_COMP_TRANSFORM` and `DEG_OB_COMP_GEOMETRY` relations between
the **Domain** object and the **Flow**, **Effector** and **Force Field** objects
are added in the `updateDepsgraph` callback of the Fluid modifier, more
specifically in `DEG_add_collision_relations`.
The node linked to these components is the `POINT_CACHE` whose assigned
function is `BKE_ptcache_object_reset`.
So include the `eModifierType_Fluid` modifier in outdated cache checks.
Reviewed By: sergey, zeddb
Maniphest Tasks: T84369
Differential Revision: https://developer.blender.org/D15210
Particles baked into memory would never load the final frame because
of an off-by-one error calculating the particles `dietime`.
This value indicates the frame which the particle ceases to exist but
was being set to the end-frame which caused this bug as the scenes
end-frame is inclusive.
While the last frame was properly written and read from memory,
the `dietime` was set to the last frame causing all the particles to be
considered dead when calculating the cached particle system.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
The code here was using velocity based interpolation copied from particles.
However there is no velocity cached in the rigid body point cache so the
results were non-sensical.
If the override system creates an override record for the cache
name (no idea why though), it trashes the disk cache on file load.
The reason is that it tries to rename cache files in update handler
when assigning the name, and BLI_rename deletes the target file even
if both names are the same.
This is a safe fix that simply aborts the pointless rename attempt.
Differential Revision: https://developer.blender.org/D13679
In almost all cases there is no difference between `G.relbase_valid`
and checking `G.main->filepath` isn't an empty string.
In many places a non-empty string is already being used instead of
`G.relbase_valid`.
The only situation where this was needed was when saving from
`wm_file_write` where they temporarily became out of sync.
This has been replaced by adding a new member to `BlendFileWriteParams`
to account for saving an unsaved file for the first time.
Reviewed By: brecht
Ref D13564
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
Confusingly, BKE_scene_frame_get did not match the frame number as expected by
BKE_scene_frame_set. Instead it return the value after time remapping, which
is commonly named "ctime".
* Rename BKE_scene_frame_get to BKE_scene_ctime_get
* Add a new BKE_scene_frame_get that matches BKE_scene_frame_set
* Use int/float depending if fractional frame is expected
This was introduced in rBe5c0d4613a8943c712b57fb336997ecd78e6508e.
The issue is that the new fluid system does not use the pointcache
system for caching anymore, but still relies on pointcache for
other things. For example, it uses DEG_add_collision_relations
which internally creates relations with pointcache. Not sure if
there are other issues.
Ideally, this dependence should be resolved in one way or another
at some point, but that is out of scope for this fix.
Differential Revision: https://developer.blender.org/D9984
Reviewers: brecht
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
The issue was that the same point cache was read by multiple
threads at the same time (the same object was evaluated for
render and for the viewport).
Both threads incremented PTCacheMem->cur which lead to the crash.
The fix is to remove the PTCacheMem->cur and store it on the
stack instead. This way every thread has its own cur.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9606
Root of the issue is that point caches are added to the object's list
on-demand, which often ends up with them being added only during
depsgraph evaluation, i.e. on COW objects.
This could result in having 'orig' data caches with invalid/unset stack
index at some points (e.g. when reading a file and applying
liboverrides), leading to discarding valid existing disk cache files.
Fact that one of those index is signed, and the other not, does not
help...
While this is very weak, fixing broken PointCache code is out of the
scope of a bug fix, so this patch merely:
* Simplifies and factorizes the code generating the 'extension' part of
caches filenames;
* Ensures `BKE_object_insert_ptcache` is called when needed so that we
always have a valid stack index to generate that filename extension.
This is only a bandaid, but it is simple and should be safe enough for
now.
Related to T82503.
