Not entirely straightforward, some manual edits were done since when
this library was created, some of the work was already done.
- Remove any bf_imbuf_movie paths from INC
- Add a dependency though LIB when missing
- Add public dependency to bf_imbuf in bf_imbuf_movie since it uses the
imbuf headers in its public headers.
- Fix namespace not to have underscores
context: https://devtalk.blender.org/t/cmake-cleanup/30260
Pull Request: https://projects.blender.org/blender/blender/pulls/132407
This commit exposes the "Quality" option of the Open Image Denoiser
to the user for the denoise node in the compositor.
There are a few quality modes:
- High - Highest quality, but takes the longest to process.
- Balanced - Slightly lower quality, but usually halves
the processing time compared to High.
- Fast - Further reduce the quality, for a small increase in
speed over Balanced.
Along with that there is a `Follow Scene` option which will use the
quality set in the scene settings.
This allows users that have multiple denoise nodes
(E.g. For multi-pass denoising), to quickly switch all nodes between
different quality modes.
Performance (denoising time):
High: 13 seconds
Balanced: 6 seconds
Fast: 5 seconds
Test setup:
CPU: AMD Ryzen 9 5950X
Denoising a 3840x2160 render
---
Follow ups:
Ideally the "Denoise Nodes" UI panel in the render properties panel
would be hidden if the compositor setup does not contain any
denoise nodes.
However implementing this efficiently can be difficult and so it was
decided this task was outside the scope of this commit.
Pull Request: https://projects.blender.org/blender/blender/pulls/130252
The compositor backdrop in certain files always have a size of 256x256
regardless of the actual size of the viewer image. That's because the
compositor writes its result to a different image buffer than the one
the image engine reads its image buffer from. And the image engine
assumes a default size of 256x256. The reason is a bit involved.
For non multi-view images, the image module uses the special cache index
value of IMA_NO_INDEX for the compositor backdrop, which works fine if
the image was detected as a non multi-view image in the first place.
However, this detection fails because the compositor may still write
multi-view images even for non multi-view renders.
In particular, before the compositor writes its viewer image, it ensures
correct views by calling BKE_image_ensure_viewer_views, which first
checks if we need to recreate the views of the viewer image if they
don't match the render views. And in the case of non multi-view image,
that check fails in one case.
Functions like BKE_image_is_multiview checks if a single unnamed view
exists in the image, unnamed being the keyword here. The root issue is
that BKE_image_ensure_viewer_views only checks that a single view
exists, while it should also check that it is unnamed. Which happens
when the user enabled multi-view, added only one view, then disabled
multi-view again.
To fix this, we add a check for the name of the view in case of non
multi-view images. And additionally pull the view matching code into its
own documented utility function for clarity.
Pull Request: https://projects.blender.org/blender/blender/pulls/132348
Add a node that finds the number of times a substring occurs in a string,
and the position of the start of the first match.
See the PR description for more rational and details.
Pull Request: https://projects.blender.org/blender/blender/pulls/129270
For some reason, the file in this report had its second mix shader socket with
the identifier "Socket.001" instead of the current "Socket_001". The age of
the file roughly corresponds to when we switched to the node declaration
system. I'm not sure why it has `.` instead of `_`, since the old socket template
system also used `_` as the deliminator. I vaguely remember some issue like
this but it's been a while and I can't find anything online.
The fix is to just manually change the socket identifier. The subversion bump
isn't conceptually necessary, it's just to stop the versioning from running
more often than necessary once the file is saved again.
Pull Request: https://projects.blender.org/blender/blender/pulls/132199
The `socket->index_in_tree()` method provides a unique index for that socket
in the node tree (it's a cached runtime value). By construction, all input/output
sockets of a node have consecutive numbers, but this (sometimes useful) fact
is currently not exposed in the API.
This patch adds new `input_socket_indices_in_tree` and
`output_socket_indices_in_tree` methods to get the range of indices for all
inputs or outputs of a node.
Previously, the code was O(n^2) because it iterated over all interface sockets,
and for each it tried to find the corresponding index by iterating over all
inputs again. Now, a `VectorSet` is used to make finding the index `O(1)`. The
new utility function may also be useful elsewhere.
Pull Request: https://projects.blender.org/blender/blender/pulls/132272
The image user of the Cryptomatte node does not have an up to date frame
number. That's because the BKE image user walker function which is used
to update image user frames numbers was missing handling for the node.
To fix this, add a case for the Cryptomatte node.
This is a partial fix for #132210.
Pull Request: https://projects.blender.org/blender/blender/pulls/132271
This renames the `Strip` struct to `StripData` and also renames
the `Sequence::strip` member to `Sequence::data`.
This is a first step towards naming the `Sequence` struct to `Strip`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132165
When moving UV seams from special custom data types to attributes,
I considered them similar to mesh selection or visibility which are
"internal" attributes that aren't accessible procedurally and are
hidden from the UI. In retrospect that was the wrong decision; users
expect UV seams to behave more like bevel weights, and that makes sense.
This PR makes UV seams accessible in modifiers (geometry nodes) by
removing the leading period from the attribute name that indicated their
internal status.
The change of the attribute name is a breaking change of the API to some
extent, even though it's technically only mesh data. To mitigate that
issue, the `mesh.attributes["name"]` lookup function is modified to
support both the old and new names. Versioning code renames the
attribute to the new name when loading older files, and renames the
new name to the old name when saving files. That handling will be
removed as a breaking change in 5.0.
Pull Request: https://projects.blender.org/blender/blender/pulls/129803
This patch refactors the BKE distortion deltas bound computation to
compute each of the bounds independently. This is done to support cases
where the distortion is not symmetric and thus would need to grow the
image in a non-symmetric way.
This patch multi-threads the distortion bounds delta computations.
Additionally, it removes the 5-step approximation which was used. The
result of this function will be cached in the compositor and the problem
domain is relatively small.
- All movie related public headers now have MOV_ prefix instead of
IMB_movie_.
- All movie related public functions now have MOV_ prefix as well,
instead of IMB_movie_ or IMB_anim_.
- IMB_anim.hh -> MOV_read.hh (also ImBufAnim -> MovieReader), and
various utility functions not related to playback were split off
into MOV_util.hh.
- Other function name tweaks for clarity, e.g. IMB_suffix_anim
-> MOV_set_multiview_suffix and so on.
- All except one usages of MOV_get_fps (nee IMB_anim_get_fps) were
ultimately just converting returned value into a float. So make
MOV_get_fps just return that directly. For the (exactly just one)
place that needs numerator and denominator, have
MOV_get_fps_num_denom.
- Code comments on the public header functions.
- Removed never-used code paths inside movie timecode proxy building
file.
It might be easier to review each commit separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/132145
Work-around the issue until we actually have correct refcounting usage
handling of Objects: For now, consider all linked objects used by
another used ID as used, even if their usercount is null.
NOTE: This _may_ have side-effects on liboverride (especially the resync
process), by leaving more 'unused' data behind. Since these are linked
though, and presumably not instanced in the Scene, this is probably an
acceptable compromise.
Pull Request: https://projects.blender.org/blender/blender/pulls/132076
We have two uses of identical code that checks to see if we have a
current preferences file (false for first run of new version). This PR
extracts that to new function `blender::bke::preferences::exists()` as
there will soon be a third use (#132046). Otherwise no behavior change.
Pull Request: https://projects.blender.org/blender/blender/pulls/132140
Currently there are three entry points to building BVH trees for mesh
ata: the caches on the mesh, an older set of functions used in the mesh
remap code, and a new set of functions used in some geometry nodes
sampling nodes. This commit unifies their implementations and switches
some functions from bit spans to index masks for representing a
selection of geometry.
A followup for 5e7f3e5c84.
Make the NOD_static_types.h file less important by moving `enum_name_legacy`
to be defined in the register function of every node. This helps our gradual transition
away from this file.
Also add a fallback to the node idname so that newly added nodes no longer need
to define the string value.
Pull Request: https://projects.blender.org/blender/blender/pulls/132131
This commit implements most features needed for simple text editing.
Active text strip can be edited in preview by pressing tab key, which
enabled text editing mode. With this mode active, outline matches text
boundary box and cursor is drawn.
Cursor can be moved with usual keys. Pressing shift starts selection.
Selection and navigation works when text is scaled or rotated. Mirrored
text is not supported in this PR. it can be done, but the text is
unreadable that way, so I kept it simple.
Multi line text is supported. Pressing return key starts new line.
Copy/paste operator uses OS copy paste buffer, so text from other apps
can be pasted.
Text is still limited to 512 characters. Text string property still
exists in side panel and is limited to single line. Individual
characters can not be styled in different way like in 3D viewport, but
the code is mostly ready for such feature.
Ref: #126547
Pull Request: https://projects.blender.org/blender/blender/pulls/127239
Action Slots point to the IDs they animate, and after swapping IDs they
also need some swappage (as the Action that first animated `id_a` will
now animate `id_b`, and vice versa).
Instead of doing this in the `id_swap()` function (and requiring
knowledge of how that's supposed to be done), just mark these pointers
as dirty so that they're rebuilt at first use.
This commit contains a little more code than strictly necessary, to add
a function in BKE for this cache invalidation. This avoids having to
have a dependency on the animrig module just for this purpose.
Fixes: #130136
Pull Request: https://projects.blender.org/blender/blender/pulls/131809
