These now live in the action editor/dopesheet related files.
Apart from these, the timeline didn't actually have other settings
of its own that were of any interest to anyone.
For many years, animators have been requesting the ability to edit keyframes in the
timeline. However, implementing such tools in the timeline quickly becomes a slippery
slope, where we'll eventually end up having to duplicate all the functionality from the
dopesheet editor.
Discussing with William and Pablo this morning, we realised that perhaps it might be possible
to just make the Timeline a mode of the Dopesheet Editor (and kill off the old standalone
Timeline), meaning that we essentially get all the Dopesheet Editor goodness for free!
Also, with some proposed UI updates (i.e. allowing "submodes" of editors to be part of the
the main editors selector), it might not even matter that there isn't an "actual" timeline
editor anymore.
This commit implements the following changes (which are actually sufficient for supporting
most basic workflows):
* Timeline mode in Dopesheet Editor
* Tweaks to UI code to make the Timeline header/menus show up in Dopesheet editor
TODO:
* Hide channels list when switching to timeline mode
* Port over cache-file indicators
* Add missing timeline-only settings that need a new home in the dopesheet
* Go through fixing all timeline editor operators (e.g. Bind to camera)
* Port over start/end frame shading (and adjust preview range rendering to make the
distinction between these clear)
* Remove old timeline editor, and transfer over any leftover code
== Main Features/Changes for Users
* Add horizontal bar at top of all non-temp windows, consisting out of two horizontal sub-bars.
* Upper sub-bar contains global menus (File, Render, etc.), tabs for workspaces and scene selector.
* Lower sub-bar contains object mode selector, screen-layout and render-layer selector. Later operator and/or tool settings will be placed here.
* Individual sections of the topbar are individually scrollable.
* Workspace tabs can be double- or ctrl-clicked for renaming and contain 'x' icon for deleting.
* Top-bar should scale nicely with DPI.
* The lower half of the top-bar can be hided by dragging the lower top-bar edge up. Better hiding options are planned (e.g. hide in fullscreen modes).
* Info editors at the top of the window and using the full window width with be replaced by the top-bar.
* In fullscreen modes, no more info editor is added on top, the top-bar replaces it.
== Technical Features/Changes
* Adds initial support for global areas
A global area is part of the window, not part of the regular screen-layout.
I've added a macro iterator to iterate over both, global and screen-layout level areas. When iterating over areas, from now on developers should always consider if they have to include global areas.
* Adds a TOPBAR editor type
The editor type is hidden in the UI editor type menu.
* Adds a variation of the ID template to display IDs as tab buttons (template_ID_tabs in BPY)
* Does various changes to RNA button creation code to improve their appearance in the horizontal top-bar.
* Adds support for dynamically sized regions. That is, regions that scale automatically to the layout bounds.
The code for this is currently a big hack (it's based on drawing the UI multiple times). This should definitely be improved.
* Adds a template for displaying operator properties optimized for the top-bar. This will probably change a lot still and is in fact disabled in code.
Since the final top-bar design depends a lot on other 2.8 designs (mainly tool-system and workspaces), we decided to not show the operator or tool settings in the top-bar for now. That means most of the lower sub-bar is empty for the time being.
NOTE: Top-bar or global area data is not written to files or SDNA. They are simply added to the window when opening Blender or reading a file. This allows us doing changes to the top-bar without having to care for compatibility.
== ToDo's
It's a bit hard to predict all the ToDo's here are the known main ones:
* Add options for the new active-tool system and for operator redo to the topbar.
* Automatically hide the top-bar in fullscreen modes.
* General visual polish.
* Top-bar drag & drop support (WIP in temp-tab_drag_drop).
* Improve dynamic regions (should also fix some layout glitches).
* Make internal terminology consistent.
* Enable topbar file writing once design is more advanced.
* Address TODO's and XXX's in code :)
Thanks @brecht for the review! And @sergey for the complaining ;)
Differential Revision: D2758
- need a draw mode in workbench engine.
- reorganized render engine retrieval in 3d view. There are 2 places
where this happenes 1. 3d view draw code and 2. draw manager.
the draw manager code is not used for external engines, currently added
an exception in for cycles. will need to have a better solution in
place.
issue was the factoring of the workspace engine that was removed. the logic implied that the clay could not be rendered as clay will be a draw mode we placed it already there so it is accessible in any engine. Should eventually fix the clay engine by migrating it to the workbench engine.
use stack instead of always allocating memory for RNA paths of checked
properties! From average 167ms to 118ms here with Autumn rig... Still a
lot to improve, but that's already much better.
Implemented the face orientation overlay for testing.
Overlay mode is only drawn when there are overlays to be rendered.
The overlay mode is rendered before the object mode.
While the feature is interesting, it's not much from what we can tell.
Retargeting is an important feature but needs
to fit in better with typical animation work-flows.
See: T52809
Brecht authored this commit, but he gave me the honours to actually
do it. Here it goes; Blender Internal. Bye bye, you did great!
* Point density, voxel data, ocean, environment map textures were removed,
as these only worked within BI rendering. Note that the ocean modifier
and the Cycles point density shader node continue to work.
* Dynamic paint using material shading was removed, as this only worked
with BI. If we ever wanted to support this again probably it should go
through the baking API.
* GPU shader export through the Python API was removed. This only worked
for the old BI GLSL shaders, which no longer exists. Doing something
similar for Eevee would be significantly more complicated because it
uses a lot of multiplass rendering and logic outside the shader, it's
probably impractical.
* Collada material import / export code is mostly gone, as it only worked
for BI materials. We need to add Cycles / Eevee material support at some
point.
* The mesh noise operator was removed since it only worked with BI
material texture slots. A displacement modifier can be used instead.
* The delete texture paint slot operator was removed since it only worked
for BI material texture slots. Could be added back with node support.
* Not all legacy viewport features are supported in the new viewport, but
their code was removed. If we need to bring anything back we can look at
older git revisions.
* There is some legacy viewport code that I could not remove yet, and some
that I probably missed.
* Shader node execution code was left mostly intact, even though it is not
used anywhere now. We may eventually use this to replace the texture
nodes with Cycles / Eevee shader nodes.
* The Cycles Bake panel now includes settings for baking multires normal
and displacement maps. The underlying code needs to be merged properly,
and we plan to add back support for multires AO baking and add support
to Cycles baking for features like vertex color, displacement, and other
missing baking features.
* This commit removes DNA and the Python API for BI material, lamp, world
and scene settings. This breaks a lot of addons.
* There is more DNA that can be removed or renamed, where Cycles or Eevee
are reusing some old BI properties but the names are not really correct
anymore.
* Texture slots for materials, lamps and world were removed. They remain
for brushes, particles and freestyle linestyles.
* 'BLENDER_RENDER' remains in the COMPAT_ENGINES of UI panels. Cycles and
other renderers use this to find all panels to show, minus a few panels
that they have their own replacement for.
Will be part of the collection manager where per collection the
ob->col can be set. This currently depends on DepsGraph +
CollectionManager.
I removed it for now so the code won't influence development
The work is mainly from Lukas Toenne, with some modifications from myself.
Includes following obvious changes:
- Particle system selection is now name-based, with lookup menu.
- Lots of new options to control varieties.
Changes comparing to the Gooseberry branch:
- Default values and versioning code ensures same behavior as the
old modifier.
- Custom data layers are coming from vertex color, the modifier
does not create arbitrary layers now. The hope is to keep data
more manageable, and maybe make it easier to select in the shader
later on.
This means, values are quantized to 256 values, but it should be
enough to get varieties in practice.
Reviewers: brecht, campbellbarton
Reviewed By: brecht
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D3157
- added `object_color_type` where the user can set if the collection
determines the color, or the object will be used for the color.
Implemented it as an enum as later this can have a random color option.
- moved OB_LIGHTING_* to DNA_view3d_types and renamed it.
- Fixed some DRY in workbench_materials.c. Can remove more DRY's but
will need to discuss the responsibility of the workbench engine as it
might become part of the eevee renderer.
ViewRender was removed, which means we can't get the render engine for files
saved in 2.8. We assume that any files saved in 2.8 were intended to use Eevee
and set the engine to that.
A fix included with this is that .blend thumbails now draw with Clay mode,
and never Eevee or Cycles. These were drawn with solid mode in 2.7, and should
be very fast and not e.g. load heavy image textures.
Differential Revision: https://developer.blender.org/D3156
Assume files saved in 2.8 were intended for Eevee and set them to material
viewport shading. In Eevee this is equal to rendered draw mode, in Cycles
this will draw with Eevee. This way Eevee demo files still show something
interesting when opened.
- added the drawtype_solid, drawtype_wireframe, drawtype_texture to
View3D
- enabled workbench panels for important render engines
- merged workbench_materials to solid_flat_mode. All draw modes will get
its own fast implementation in the workbench
Folders removed entirely:
* //extern/recastnavigation
* //intern/decklink
* //intern/moto
* //source/blender/editors/space_logic
* //source/blenderplayer
* //source/gameengine
This includes DNA data and any reference to the BGE code in Blender itself.
We are bumping the subversion.
Pending tasks:
* Tile/clamp code in image editor draw code.
* Viewport drawing code (so much of this will go away because of BI removal
that we can wait until then to remove this.
Why exactly this happens remains unclear, found that in the
autumn.blenrig file of Spring production while working on static
overrides... Tons of ugly IDProps in that rig. xD
The depsgraph was always created within a fixed evaluation context. Passing
both risks the depsgraph and evaluation context not matching, and it
complicates the Python API where we'd have to expose both which is not so
easy to understand.
This also removes the global evaluation context in main, which assumed there
to be a single active scene and view layer.
Differential Revision: https://developer.blender.org/D3152
- Wasn't clear which functions handle edit-bones.
- Mixed both ebone and edit_bone in names.
- Didn't use ED_armature_* prefix for public API.
See P655 to apply to branches.
