This integrates the new implicit-sharing system (from fbcddfcd68)
with `CustomData`. Now the potentially long arrays referenced by custom
data layers can be shared between different systems but most importantly
between different geometries. This makes e.g. copying a mesh much cheaper
because none of the attributes has to be copied. Only when an attribute
is modified does it have to be copied.
Also see the original design task: #95845.
This reduces memory and improves performance by avoiding unnecessary
data copies. For example, the used memory after loading a highly
subdivided mesh is reduced from 2.4GB to 1.79GB. This is about 25%
less which is the expected amount because in `main` there are 4 copies
of the data:
1. The original data which is allocated when the file is loaded.
2. The copy for the depsgraph allocated during depsgraph evaluation.
3. The copy for the undo system allocated when the first undo step is
created right after loading the file.
4. GPU buffers allocated for drawing.
This patch only gets rid of copy number 2 for the depsgraph. In theory
the other copies can be removed as part of follow up PRs as well though.
-----
The patch has three main components:
* Slightly modified `CustomData` API to make it work better with implicit
sharing:
* `CD_REFERENCE` and `CD_DUPLICATE` have been removed because they are
meaningless when implicit-sharing is used.
* `CD_ASSIGN` has been removed as well because it's not an allocation
type anyway. The functionality of using existing arrays as custom
data layers has not been removed though.
* This can still be done with `CustomData_add_layer_with_data` which
also has a new argument that allows passing in information about
whether the array is shared.
* `CD_FLAG_NOFREE` has been removed because it's no longer necessary. It
only existed because of `CD_REFERENCE`.
* `CustomData_copy` and `CustomData_merge` have been split up into a
functions that do copy the actual attribute values and those that do
not. The latter functions now have the `_layout` suffix
(e.g. `CustomData_copy_layout`).
* Changes in `customdata.cc` to make it actually use implicit-sharing.
* Changes in various other files to adapt to the changes in `BKE_customdata.h`.
Pull Request: https://projects.blender.org/blender/blender/pulls/106228
The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
When an object has no UV layers and an anonymous UV layer is created,
the anonymous layer gets set as the default (render) layer. This is
very confusing because it then uses a hidden anonmous layer. This patch
suppresses the usage of anonymous layers for rendering.
Pull Request: https://projects.blender.org/blender/blender/pulls/105192
This simplifies the usage of the API and is preparation for #104478.
The `CustomData_add_layer` and `CustomData_add_layer_named` now have corresponding
`*_with_data` functions that should be used when creating the layer from existing data.
Pull Request: https://projects.blender.org/blender/blender/pulls/105708
This reverts commit 19222627c6.
Something went wrong here, seems like this commit merged the main branch
into the release branch, which should never be done.
This reverts commit 68181c2560.
I merged 3.6 into 3.5 by mistake. Basically I had a PR against main,
then changed it in the last minute to be against 3.5 via the
web-interface unaware that I shouldn't do it without updating the
patch.
Original Pull Request: #104889
Note that the node group has its sockets names
translated, while the built-in nodes don't.
So we need to use data_ for the built-in nodes names,
and the sockets of the created node groups.
Pull Request #104889
The existing logic to copy `BMesh` custom data layers to `Mesh`
attribute arrays was quite complicated, and incorrect in some cases
when the source and destinations didn't have the same layers.
The functions leave a lot to be desired in general, since they have
a lot of redundant complexity that ends up doing the same thing for
every element.
The problem in #104154 was that the "rest_position" attribute overwrote
the mesh positions since it has the same type and the positions weren't
copied. This same problem has shown up in boolean attribute conversion
in the past. Other changes fixed some specific cases but I think a
larger change is the only proper solution.
This patch adds preprocessing before looping over all elements to
find the basic information for copying the relevant layers, taking
layer names into account. The preprocessing makes the hot loops
simpler.
In a simple file with a 1 million vertex grid, I observed a 6%
improvement animation playback framerate in edit mode with a simple
geometry nodes modifier, from 5 to 5.3 FPS.
Fixes#104154, #104348
Pull Request #104421
Currently you can retrieve a mutable array from a const CustomData.
That makes code unsafe since the compiler can't check for correctness
itself. Fix that by introducing a separate function to retrieve mutable
arrays from CustomData. The new functions have the `_for_write`
suffix that make the code's intention clearer.
Because it makes retrieving write access an explicit step, this change
also makes proper copy-on-write possible for attributes.
Notes:
- The previous "duplicate referenced layer" functions are redundant
with retrieving layers with write access
- The custom data functions that give a specific index only have
`for_write` to simplify the API
Differential Revision: https://developer.blender.org/D14140
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
Previously, the lifetimes of anonymous attributes were determined by
reference counts which were non-deterministic when multiple threads
are used. Now the lifetimes of anonymous attributes are handled
more explicitly and deterministically. This is a prerequisite for any kind
of caching, because caching the output of nodes that do things
non-deterministically and have "invisible inputs" (reference counts)
doesn't really work.
For more details for how deterministic lifetimes are achieved, see D16858.
No functional changes are expected. Small performance changes are expected
as well (within few percent, anything larger regressions should be reported as
bugs).
Differential Revision: https://developer.blender.org/D16858
In some situations, layers were filled with their default value
when converting from Mesh to BMesh (entering edit mode, for example).
This was caused by the recently added "copy mesh to bmesh" or "merge
mesh to bmesh" custom data functions creating a difference custom
data format than was used for the copying functions used later.
`CustomData_to_bmesh_block` is not robust enough to handle simple
differences in layout between the layout of the source and result
CustomData layers, because it relies on the order of the types and
the number of layers within each type.
As a fix, make the "mesh to bmesh" special case more explicit in
the conversion functions. This makes the difference in the API
smaller, which is a nice improvement anwyay.
Fixes T101796
Due to increased usage of typed arrays in C++ and name/offset based
access for BMesh, these are unlikely to be used again, and haven't been
used in many years.
Rewrite PBVH draw to allocate attributes into individual VBOs.
The old system tried to create a single VBO that could feed
every open viewport. This required uploading every color and
UV attribute to the viewport whether needed or not, often exceeding
the VBO limit.
This new system creates one VBO per attribute. Each attribute layout is
given its own GPU batch which is cached inside the owning PBVH node.
Notes:
* This is a full C++ rewrite. The old code is still there; ripping it out
can happen later.
* PBVH nodes now have a collection of batches, PBVHBatches, that keeps
track of all the batches inside the node.
* Batches are built exclusively from a list of attributes.
* Each attribute has its own VBO.
* Overlays, workbench and EEVEE can all have different attribute
layouts, each of which will get its own batch.
Reviewed by: Clement Foucault
Differential Revision: https://developer.blender.org/D15428
Ref D15428
This is very similar to D14077. There are two differences though.
First is that vertex creases are already stored in a separate layer,
and second is that we can now completely remove use of `Mesh.cd_flag`,
since that information is now inherent to whether the layers exist.
There are two functional differences here:
* Operators are used to add and remove layers instead of a property.
* The "crease" attribute can be created and removed by geometry nodes.
The second change should make various geometry nodes slightly faster,
since the "crease" attribute was always processed before. Creases are
now interpolated generically in the CustomData API too, which should
help maintain the values across edits better.
Meshes get an `edge_creases` RNA property like the existing vertex
property, to provide more efficient access to the data in Cycles.
One test failure is expected, where different rounding between float
the old char storage means that 5 additional points are scattered in
a geometry nodes test.
Differential Revision: https://developer.blender.org/D15927
New unified attribute API for sculpt code.
= Basic Design =
The sculpt attribute API can create temporary or permanent attributes (only supported in `PBVH_FACES` mode). Attributes are created via `BKE_sculpt_attribute_ensure.`
Attributes can be explicit CustomData attributes or simple array-based pseudo-attributes (this is useful for PBVH_GRIDS and PBVH_BMESH).
== `SculptAttributePointers` ==
There is a structure in `SculptSession` for convenience attribute pointers, `ss->attrs`. Standard attributes should assign these; the attribute API will automatically clear them when the associated attributes are released. For example, the automasking code stores its factor attribute layer in `ss->attrs.automasking_factor`.
== Naming ==
Temporary attributes should use the SCULPT_ATTRIBUTE_NAME macro for naming, it takes an entry in `SculptAttributePointers` and builds a layer name.
== `SculptAttribute` ==
Attributes are referenced by a special `SculptAttribute` structure, which holds
all the info needed to look up elements of an attribute at run time.
All of these structures live in a preallocated flat array in `SculptSession`, `ss->temp_attributes`. This is extremely important. Since any change to the `CustomData` layout can in principle invalidate every extant `SculptAttribute`, having them all in one block of memory whose location doesn't change allows us to update them transparently.
This makes for much simpler code and eliminates bugs. To see why this is tricky to get right, imagine we want to create three attributes in PBVH_BMESH mode and we provide our own `SculptAttribute` structs for the API to fill in. Each new layer will invalidate the `CustomData` block offsets in the prior one, leading to memory corruption.
Reviewed by: Brecht Van Lommel
Differential Revision: https://developer.blender.org/D15496
Ref D15496
When resizing mesh and curves attribute storage, avoid initializing the
new memory for basic types. Also, avoid skipping "no free" layers; all
layers should be reallocated to the new size since they may be accessed.
The semantics introduced in 25237d2625 are essential for this
change, because otherwise we don't have a way to construct non-trivial
types in the new memory.
In a basic test of the extrude node, I observed a performance
improvement of about 30%, from 55ms to 42ms.
Differential Revision: https://developer.blender.org/D15818
As described in T95966, the goal is to move to a "struct of arrays"
approach rather than gathering an arbitrary set of data in hard-coded
structs. This has performance benefits, but also code complexity
benefits (this patch removes plenty of code, though the boilerplate
for the new operators outweighs that here).
To mirror the internal change, the options for storing mesh bevel
weights are converted into operators that add or remove the layer,
like for some other layers.
The most complex change is to the solidify modifier, where bevel
weights had special handling. Other than that, most changes are
removing clearing of the weights, boilerplate for the add/remove
operators, and removing the manual transfer of bevel weights
in bmesh - mesh conversion.
Eventually bevel weights can become a fully generic attribute,
but for now this patch aims to avoid most functional changes.
Bevel weights are still written and read from the mesh in the old way,
so neither forward nor backward compatibility are affected. As described
in T95965, writing in the old format will be done until 4.0.
Differential Revision: https://developer.blender.org/D14077
When allocating new `CustomData` layers, often we do redundant
initialization of arrays. For example, it's common that values are
allocated, set to their default value, and then set to some other
value. This is wasteful, and it negates the benefits of optimizations
to the allocator like D15082. There are two reasons for this. The
first is array-of-structs storage that makes it annoying to initialize
values manually, and the second is confusing options in the Custom Data
API. This patch addresses the latter.
The `CustomData` "alloc type" options are rearranged. Now, besides
the options that use existing layers, there are two remaining:
* `CD_SET_DEFAULT` sets the default value.
* Usually zeroes, but for colors this is white (how it was before).
* Should be used when you add the layer but don't set all values.
* `CD_CONSTRUCT` refers to the "default construct" C++ term.
* Only necessary or defined for non-trivial types like vertex groups.
* Doesn't do anything for trivial types like `int` or `float3`.
* Should be used every other time, when all values will be set.
The attribute API's `AttributeInit` types are updated as well.
To update code, replace `CD_CALLOC` with `CD_SET_DEFAULT` and
`CD_DEFAULT` with `CD_CONSTRUCT`. This doesn't cause any functional
changes yet. Follow-up commits will change to avoid initializing
new layers where the correctness is clear.
Differential Revision: https://developer.blender.org/D15617
The function does modify the object since it changes the name of a layer
it owns. Ideally this wouldn't be possible, but raw pointers don't have
ownership semantics so this is a common problem with CustomData.
This commit moves the hide status of mesh vertices, edges, and faces
from the `ME_FLAG` to optional generic boolean attributes. Storing this
data as generic attributes can significantly simplify and improve code,
as described in T95965.
The attributes are called `.hide_vert`, `.hide_edge`, and `.hide_poly`,
using the attribute name semantics discussed in T97452. The `.` prefix
means they are "UI attributes", so they still contain original data
edited by users, but they aren't meant to be accessed procedurally by
the user in arbitrary situations. They are also be hidden in the
spreadsheet and the attribute list by default,
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when the hide status is used. When the flags are removed
completely, requirements will decrease when hiding is unused.
Further notes:
* Some code can be further simplified to skip some processing when the
hide attributes don't exist.
* The data is still stored in flags for `BMesh`, necessitating some
complexity in the conversion to and from `Mesh`.
* Access to the "hide" property of mesh elements in RNA is slower.
The separate boolean arrays should be used where possible.
Ref T95965
Differential Revision: https://developer.blender.org/D14685
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
Previously the function had a fair amount of ugly boilerplate to avoid
allocating the temporary layers array, and then free it if necessary.
`blender::Vector` solves that problem more elegantly. Passing a span,
using references in a few cases, and using a switch statement also make
the functions simpler.
This refactoring is in preparation for D14583 and D14685.
Differential Revision: https://developer.blender.org/D15011
Previously, the conversion was done manually for a fixed set of types.
Now, there is a more general utility that can be used in other contexts
(outside of geometry nodes attribute processing) as well.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
