- "Out" meaning "one end of a bone". Same as in 9120c86c3f.
- "Canvas" meaning a painting support for Dynamic Paint.
- "Twist" meaning an action verb, as opposed to an amount.
- "Solid" meaning a textureless, single-color material.
- "Blend mode" meaning material opacity blending, as opposed to color
blending.
- "Pixel Size" meaning "a size measured using pixels as the unit".
- "Light" meaning "not dark", as in "Light Theme".
Ref #43295
`ptcache_baker_create` falsely assumed the PointCache owner id is always
an **object**, but when baking rigid body world it is a **scene**. Code
would cast the ID to an object and passed that to `BKE_ptcache_id_find` /
`BKE_ptcache_ids_from_object` (which can get terribly wrong -- reading
_something_ on the scene as something from the assumed object).
Prior to f61ff22967 this was less likely to be a problem, but that
commit introduced a `DrawDataList` into the `struct Scene`. In the file
from the report, this would lead to `foreach_object_particle_ptcache`
now recognizing garbage memory as a particle system, accessing its
`ParticleSettings` `phystype` would then crash (buffer-overflow).
Now pass a NULL object to `BKE_ptcache_id_find` in case we are having a
scene, following code still handles rigid bodies just fine (the scene is
actually passed separately as well).
Pull Request: https://projects.blender.org/blender/blender/pulls/107536
Implements #95966, as the final step of #95965.
This commit changes the storage of mesh edge vertex indices from the
`MEdge` type to the generic `int2` attribute type. This follows the
general design for geometry and the attribute system, where the data
storage type and the usage semantics are separated.
The main benefit of the change is reduced memory usage-- the
requirements of storing mesh edges is reduced by 1/3. For example,
this saves 8MB on a 1 million vertex grid. This also gives performance
benefits to any memory-bound mesh processing algorithm that uses edges.
Another benefit is that all of the edge's vertex indices are
contiguous. In a few cases, it's helpful to process all of them as
`Span<int>` rather than `Span<int2>`. Similarly, the type is more
likely to match a generic format used by a library, or code that
shouldn't know about specific Blender `Mesh` types.
Various Notes:
- The `.edge_verts` name is used to reflect a mapping between domains,
similar to `.corner_verts`, etc. The period means that it the data
shouldn't change arbitrarily by the user or procedural operations.
- `edge[0]` is now used instead of `edge.v1`
- Signed integers are used instead of unsigned to reduce the mixing
of signed-ness, which can be error prone.
- All of the previously used core mesh data types (`MVert`, `MEdge`,
`MLoop`, `MPoly` are now deprecated. Only generic types are used).
- The `vec2i` DNA type is used in the few C files where necessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/106638
The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
With the goal of clearly differentiating between arrays and single
elements, improving consistency across Blender, and using wording
that's easier to read and say, change variable names for Mesh edges
and polygons/faces.
Common renames are the following, with some extra prefixes, etc.
- `mpoly` -> `polys`
- `mpoly`/`mp`/`p` -> `poly`
- `medge` -> `edges`
- `med`/`ed`/`e` -> `edge`
`MLoop` variables aren't affected because they will be replaced
when they're split up into to arrays in #104424.
Also minor changes in comments:
- Reference BLENDER_HISTORY_FILE instead of the literal file-name
(simplifies looking up usage).
- Use usernames in tags, as noted in code-style.
These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
The goal is to improve clarity and readability, without
introducing big design changes.
Follows the recent obmat to object_to_world refactor: the
similar naming is used, and it is a run-time only rename,
meaning, there is no affect on .blend files.
This patch does not touch the redundant inversions. Those
can be removed in almost (if not all) cases, but it would
be the best to do it as a separate change.
Differential Revision: https://developer.blender.org/D16367
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
These functions are almost identical, the main difference being
BLI_join_dirfile didn't trim existing slashes when joining paths
however this isn't an important difference that warrants a separate
function.
Using varargs had the disadvantages, replace with a macro which has
some advantages.
- Arguments are type checked.
- Less verbose.
- Unintended NULL arguments would silently terminate joining paths.
- Passing in a NULL argument warns with GCC.
This commit replaces the `Mesh_Runtime` struct embedded in `Mesh`
with `blender::bke::MeshRuntime`. This has quite a few benefits:
- It's possible to use C++ types like `std::mutex`, `Array`,
`BitVector`, etc. more easily
- Meshes saved in files are slightly smaller
- Copying and writing meshes is a bit more obvious without
clearing of runtime data, etc.
The first is by far the most important. It will allows us to avoid a
bunch of manual memory management boilerplate that is error-prone and
annoying. It should also simplify future CoW improvements for runtime
data.
This patch doesn't change anything besides changing `mesh.runtime.data`
to `mesh.runtime->data`. The cleanups above will happen separately.
Differential Revision: https://developer.blender.org/D16180
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d. This aligns better with
existing naming where the shorter names are much more common.
The only real difference between `GPU_SHADER_2D_UNIFORM_COLOR` and
`GPU_SHADER_3D_UNIFORM_COLOR` is that in the vertex shader the 2D
version uses `vec4(pos, 0.0, 1.0)` and the 3D version uses
`vec4(pos, 1.0)`.
But VBOs with 2D attributes work perfectly in shaders that use 3D
attributes. Components not specified are filled with components from
`vec4(0.0, 0.0, 0.0, 1.0)`.
So there is no real benefit to having two different shader versions.
This will simplify porting shaders to python as it will not be
necessary to use a 3D and a 2D version of the shaders.
In python the new name for '2D_UNIFORM_COLOR'' and '3D_UNIFORM_COLOR'
is 'UNIFORM_COLOR', but the old names still work for backward
compatibility.
Differential Revision: https://developer.blender.org/D15836
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7, 410a6efb74). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
Those collections were so far mainly just tagged as fake user (even
though a few places in code already incremented usercount on them).
Since we now clear the fakeuser flag when linking/appending data, ensure
that these collections are preserved by making these usages regular ID
refcounting ones.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15783
With libepoxy we can choose between EGL and GLX at runtime, as well as
dynamically open EGL and GLX libraries without linking to them.
This will make it possible to build with Wayland, EGL, GLVND support while
still running on systems that only have X11, GLX and libGL. It also paves
the way for headless rendering through EGL.
libepoxy is a new library dependency, and is included in the precompiled
libraries. GLEW is no longer a dependency, and WITH_SYSTEM_GLEW was removed.
Includes contributions by Brecht Van Lommel, Ray Molenkamp, Campbell Barton
and Sergey Sharybin.
Ref T76428
Differential Revision: https://developer.blender.org/D15291
The specific functions for vertex colors and and sculpt vertex colors
can be replaced by more generic attribute functions internally.
Also remove a paramter from one function.
It's helpful to make the separation of legacy data formats explicit,
because it declutters actively changed code and makes it clear which
areas do not follow Blender's current design. In this case I separated
the `MFace`/"tessface" conversion code into a separate blenkernel
.cc file and header. This also makes refactoring to remove these
functions simpler because they're easier to find.
In the future, conversions to the `MLoopUV` type and `MVert`
can be implemented here for the same reasons (see T95965).
Differential Revision: https://developer.blender.org/D15396
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
Regression in [0] which caused canceled PRESS events not to generate
CLICK_DRAG.
Resolve by checking for an active brush tool in poll instead of the
PARTICLE_OT_brush_edit invoke function.
[0]: 4d0f846b93,
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
Currently this isn't used in the key-map, it will eventually
allow the 3D viewports tweak tool to match the behavior of other
editors that support tweaking a selection without first de-selecting
all other elements.
- Add SelectPick_Params struct to make picking logic more
straightforward and easier to extend.
- Use `eSelectOp` instead of booleans (extend, deselect, toggle)
which were used to represent 4 states (which wasn't obvious).
- Handle deselect_all when pocking instead of view3d_select_exec,
de-duplicate de-selection which was already needed in when replacing
the selection in picking functions.
- Handle outliner update & notifiers in the picking functions
instead of view3d_select_exec.
- Fix particle select deselect_all option which did nothing.
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
Lets `makesrna` generate a `RNA_prototypes.h` header with declarations for all
RNA properties. This can be included in regular source files when needing to
reference RNA properties statically.
This solves an issue on MSVC with adding such declarations in functions, like
we used to do. See 800fc17367. Removes any such declarations and the related
FIXME comments.
Reviewed By: campbellbarton, LazyDodo, brecht
Differential Revision: https://developer.blender.org/D13837
Correct misspellings in code comments of "vertex" and "vertices".
See D13932 for more details.
Differential Revision: https://developer.blender.org/D13932
Reviewed by Harley Acheson
- Rename ED_view3d_win_to_delta `mval` argument to `xy_delta` as it
as it was misleading since this is an screen-space offset not a region
relative cursor position (typical use of the name `mval`).
Also rename the variable passed to this function which also used the
term `mval` in many places.
- Re-order the output argument of ED_view3d_win_to_delta last.
use an r_ prefix for return arguments.
- Document how the `zfac` argument is intended to be used.
- Split ED_view3d_calc_zfac into two functions as the `r_flip` argument
was only used in some special cases.
Using flags makes checking multiple modifiers at once more convenient
and avoids macros/functions such as IS_EVENT_MOD & WM_event_modifier_flag
which have been removed. It also simplifies checking if modifier keys
have changed.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
