Instead of using `CurveEval` to draw the curve wire edges, use
the new `Curves` data-block, which is already built as part of
an object's evaluated geometry set whenever there is a
`CurveComponent`.
This means that we can remove `Curve`'s temporary ownership
of `CurveEval` for drawing (added in 9ec12c26f1),
which caused a memory leak as described in T96498.
In my testing this improved performance by around 1.5x during
viewport playback, back to the performance of 3.1 before the
curve data structure transition started.
The next step of using the GPU to do the final curve evaluation
for the viewport is described in T96455, but is unrelated.
Differential Revision: https://developer.blender.org/D14551
This commit furthers some of the changes that were started in
rBb9febb54a492 and subsequent commits by changing the way surface
objects are presented to render engines and other users of evaluated
objects in the same way. Instead of presenting evaluated surface objects
as an `OB_SURF` object with an evaluated mesh, `OB_SURF` objects
can now have an evaluated geometry set, which uses the same system
as other object types to deal with multi-type evaluated data.
This clarification makes it more obvious that lots of code that dealt
with the `DispList` type isn't used. It wasn't before either, now it's
just *by design*. Over 1100 lines can be removed. The legacy curve
draw cache code is much simpler now too. The idea behind the further
removal of `DispList` is that it's better to focus optimization efforts
on a single mesh data structure.
One expected functional change is that the evaluated mesh from surface
objects can now be used in geometry nodes with the object info node.
Cycles and the OBJ IO tests had to be tweaked to avoid using evaluated
surface objects instead of the newly exposed mesh objects.
Differential Revision: https://developer.blender.org/D14550
This adds a new Grow/Shrink brush which is similar to the Length
brush in the old hair system.
* It's possible to switch between growing and shrinking by hold
down ctrl and/or by changing the direction enum.
* 3d brush is supported.
* Different brush falloffs are supported.
* Supports scaling curves uniformly or shrinking/extrapolating
them. Extrapolation is linear only in this patch.
* A minimum length settings helps to avoid creating zero-sized curves.
Differential Revision: https://developer.blender.org/D14474
Those geometry types are expected to behave the same as e.g. mesh
with respect to data copying. The fact that this was not enabled
already was an oversight in the initial commit that added these types.
Differential Revision: https://developer.blender.org/D14554
Regression in [0] which missed excluding FRAME_CHANGE from
deg_recalc_flags_for_legacy_zero causing all
DEG_id_tag_update(&scene->id, 0) calls to re-calculate animation data.
When this tagging was done in the RNA update function, changing
key-framed values in the UI would be immediate reset to their
keyed-values.
Thanks to Philipp Oeser for finding the root cause.
[0]: 35aedd87e7
This is to improve grammatical consistency with other selection options.
Maniphest Tasks: T96745
Differential Revision: https://developer.blender.org/D14444
Support gizmos for the the action space type based on how it is done for
other types of spaces in Blender (e.g: view3d, image).
See patch submission for sample code.
Reviewed By: campbellbarton, sybren
Ref D13999
Some edit-curve operators used an 'ok' variable to represent
if the selection was found and if a change was made.
Previously it would only return cancel if an error was shown
causing a redundant undo step to be added without a selection.
Since this is simple behavior that shouldn't need much explanation,
use two variables with meaningful names to avoid confusion.
Reviewing D14511 highlighted this issue.
Bug introduced in the smooth function changes done in commit rBd4e1458db3a0e0eaf80219dc8e6d10cb27620793
Differential Revision: https://developer.blender.org/D14548
The internal camera used to render the thumbnails also has to consider
`clip_start` and `clip_end`.
Reviewed By: Severin
Maniphest Tasks: T95678
Differential Revision: https://developer.blender.org/D14138
The legacy Pose Library operators now refer to the "Legacy Pose Library",
and their description mentions they are deprecated and will be removed
from Blender 3.3. The same was added to the `Object.pose_library` RNA
property.
Ref: T93405
The removal of these deprecated properties is tracked in T93406.
UV editor used wire color for drawing unselected vertices.
Add color variable to shader, so theme color can be used.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D14373
Add edge panning feature to transform operator. It works in same way as
in node editor, but Y axis is limited by usable range up to 128
channels.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14310
This only adds a experimental flag to enable the 3d texturing brush,
so future developments could check. Currently the flag does nothing
as no functionality of the 3d texturing brush has been implemented.
ImageTileWrapper is a wrapper around ImageTile to centralize tile calculations when
using CPP. Currentry used by the image engine and will be used for the 3d
texturing brush project.
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
This takes state of soc-2020-io-performance branch as it was at
e9bbfd0c8c7 (2021 Oct 31), merges latest master (2022 Apr 4),
adds a bunch of tests, and fixes a bunch of stuff found by said
tests. The fixes are detailed in the differential.
Timings on my machine (Windows, VS2022 release build, AMD Ryzen
5950X 32 threads):
- Rungholt minecraft level (269MB file, 1 mesh): 54.2s -> 14.2s
(memory usage: 7.0GB -> 1.9GB).
- Blender 3.0 splash scene: "I waited for 90 minutes and gave up"
-> 109s. Now, this time is not great, but at least 20% of the
time is spent assigning unique names for the imported objects
(the scene has 24 thousand objects). This is not specific to obj
importer, but rather a general issue across blender overall.
Test suite file updates done in Subversion tests repository.
Reviewed By: @howardt, @sybren
Differential Revision: https://developer.blender.org/D13958
This extracts the inner loops into a separate function.
There are two main reasons for this:
* Allows using `__restrict` to indicate that no other parameter
aliases with the output array. This allows for better optimization.
* Makes it easier to search for the generated assembly code,
especially with the `BLI_NOINLINE`.
Replace 5 arguments with a single struct as the same arguments
are used in many places.
This didn't read well and was confusing with both arguments named
`val` & `value` in the case of WM_modalkeymap_add_item.
Remove the extended version of ED_curve_editnurb_select_pick,
pass the size threshold directly to this function but as the distance in
pixels instead of a multiplier for ED_view3d_select_dist_px.
Using a multiplier is a less direct way to reference the threshold.
