This adds a new Camera Info node to Geometry Nodes. It provides information
about the passed in camera like its projection matrix and focus distance.
This can be used for camera culling which was must more complex before.
It also allows building other view-dependent effects.
Pull Request: https://projects.blender.org/blender/blender/pulls/135311
When viewing extension details, no need to call userpref_show if a
Preferences editor is in the main window, as that will just open a new
Preferences window.
Pull Request: https://projects.blender.org/blender/blender/pulls/136139
Texture nodes are already supported through the GPUMaterial and
multi-function compositor abstractions. So we just need to expose them
through the add menu.
Add support for a 5th modifier key called "hyper",
this is a modifier supported on Wayland & X11 although
other platforms could support an additional modifier too.
Both GNOME and KDE can map CapsLock to Hyper.
Other compositors can use the XKB_DEFAULT_OPTIONS environment variable.
This allows users to have an additional modifier for their own use
that doesn't conflict with other keys.
Ref !136340
Rename to be more consistent with other Blender keymaps, as well as the
naming convention used in "View Type."
- "SequencerCommon" -> "Video Sequence Editor"
- "SequencerPreview" -> "Preview"
- "Sequencer Timeline Tool" -> "Sequencer Tool"
- "Sequencer Preview Tool" -> "Preview Tool"
There is versioning in place to make sure custom keyconfigs keep working.
Once #131102 goes through, if we would like to rename the "Sequencer"
view type to "Timeline" or "Sequencer Timeline," then we can make the
necessary changes here too.
Pull Request: https://projects.blender.org/blender/blender/pulls/136217
Strip locking was meant to be used with strip transformation only. So
the check, whether strip is locked is removed from hide/unhide operator.
Further it was requested to lock sound strip subframe offset. Since this
is time related property, it was moved to time panel. This also
addresses request to make it more obvious, why the value can't be
changed.
The name of the property was clarified from "Offset" to
"Sound offset", because there are another 2 offsets in the panel.
Finally, when channel is locked, properties in side panel now reflects
this state. This is done by adding RNA get function for `Strip.lock`
property. Function `seq::transform_is_locked` is used instead of
checking `SEQ_LOCK` flag, because it also checks channel state. With
this setup, the lock property can't be disabled while channel is locked.
However strip lock flag will be unset, which can be prevented. (I am not sure which is better. Both are fine in my eyes.)
Pull Request: https://projects.blender.org/blender/blender/pulls/135831
When using vertex parenting, an option for using the parent object
final evaluated indices is exposed in the Object Properties: Relations
panel. This allows the calculation of the parent vertex position to
ignore the the CD_ORIGINDEX layer and instead use the final indices
that may have been altered by the node tree evaluation.
The indices that will be used for the vertex parenting are also exposed
to the UI in the same panel, allowing them to be altered after the
vertex parent has been created.
This adds icons for ICON_RGB_RED, ICON_RGB_GREEN, and ICON_RGB_BLUE
that display with those colors. This does not remove the existing
monochrome ICON_COLOR_* icons. This also allows the translation of
the "R", "G", "B" characters shown, for languages that prefer color
words that do not start with these.
Pull Request: https://projects.blender.org/blender/blender/pulls/136154
Part of #134755 / #134766.
Adds options to the new Import Settings popover (added in 7a6beb65f4)
to toggle collection instancing for dragging in collections. It can be
toggled separately for linking and appending, since it's typical to use
instancing for linking, but not appending (current default, also with
this change).
Previously, toggling collection instancing was only possible via the
Adjust Last Operation panel but this wasn't obvious, many people were
not aware. Adding this option based on feedback by the Blender Studio.
Pull Request: https://projects.blender.org/blender/blender/pulls/135996
This patch adds a new Image Info node which returns information about
compositor images. The node has three sources:
The node returns the following information:
- Pixel Coordinates: The coordinates of the centers of the pixels in the
image. Those are essentially the integer coordinates with half pixels
offsets added.
- Texture Coordinates: Zero centered pixel coordinates normalized along
the greater dimension. Somewhat analogous to Object coordinates in
shader nodes.
- Resolution: The resolution of the image.
- Location: The location of the image in the virtual compositing space.
- Rotation: The rotation of the image in the virtual compositing space.
- Scale: The scale of the image in the virtual compositing space.
This node is very useful to allow greater flexibility and procedural
creations. For instance, coordinates can be used to create procedural
effects like vignette using very simple math nodes. And size can be used
to compute size-relative parameters for pixel-parameter nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/135104
This patch adds common nodes that are used in Geometry Nodes and Shader
Nodes to the compositor. The following new nodes were added:
- Vector Math.
- Vector Rotate.
- Vector Mix.
- Value Mix.
- Clamp.
- Float Curve.
- Blackbody.
The follow nodes were replaced by common counterparts:
- Value.
- Color Ramp.
- Mix Color.
- Map Range.
- Math.
- Combine XYZ.
- Separate XYZ.
- Vector Curves.
Some new features were gained in the process:
- Mix Color can now clamp both factor and result.
- Map Range can map different types and interpolations.
- Vector Curves gained a new Factor input.
Some behaviors were changed:
- Map Range previously forcibly clamped values whose magnitude is larger
than the arbitrary value of 10000. This is no longer the case.
Some nodes were removed:
- Map Value. This was Map Range without the maximum 10000 limitation
followed by a Clamp node. Both are now available as nodes.
Some common nodes remain separate:
- Separate/Combine Color. Shader counterpart does not yet support all
color modes, and does not support alpha.
- RGB Curves. Shader variant does not support Film-Like curves or
Black/White balancing.
Texture nodes will also be added soon in a separate patch. Nodes that
were replaced are now deprecated but still exist and will later be
removed in v5.0. Backward compatibility code was introduced to convert
from the deprecated nodes to the new nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/135300
Part of #134755 / #134766.
Replaces the current import method menu in the middle of the Asset
Browser header with a "Import Settings" popover. The import method is
located there now, because it doesn't need to be as prominent as it used
to be, especially with #104686.
Plan is to add further settings to this popover, e.g. see #135996 or
#134943.
Before this patch, Video Output using FFmpeg video
display lot of parameters.
But some of theses have a meaning only for some codec
(mainly lossy gop codecs : H264, H265, AV1...)
Hide not useful parameters for codec :
'DNXHD', 'FFV1', 'HUFFYUV', 'PNG', 'QTRLE'
- DNXHD : intra frame codec, encoding setting depends of a profile
- FFV1/QTRLE : Intra or P frames only. Lossless codec
- HUFFYUV/PNG : Intra lossless codec
Co-authored-by: mvji <33432858+mvji@users.noreply.github.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/135827
The import nodes are considered complete enough to expose without
the experimental option. This commit removes the option so they will
be exposed in 4.5. There are still some possible future improvements,
including automatic caching, possibly exposing more input sockets,
and possibly including imported paths in the "Internal Dependencies"
panel. Those are considered non blocking though.
Pull Request: https://projects.blender.org/blender/blender/pulls/135957
Add 12, 8, and 6 FPS presets often used in stylized animation,
especially in 2D/Grease Pencil animation.
12 FPS to animate on 2's, 8 FPS on 3's, 6 FPS on 4's or for
early blocking stages or storyboard.
Pull Request: https://projects.blender.org/blender/blender/pulls/135712
The poll functions for: VIEW3D_OT_edit_mesh_* operators only checked
for an edit-mode object which failed with an unhandled exception for
non-mesh objects.
Part of #134755 / #134766.
The asset browser currently lacks a compact view that leaves names
readable. Especially when managing asset libraries (e.g. to prepare it
for sharing or set up a production library), this is quite a usability
issue. A column view like the file browser has can solve this, allowing
a quick overview and fast browsing of libraries, while keeping names
readable.
Adds a new "Horizontal List" display mode to the asset browser that
distributes assets over multiple columns, with horizontal scrolling.
Asset previews are shown in this mode, plus an asset type icon if
there's enough space. The size of previews and the columns can be
configured next to the display mode, for optimizing the display.
Pull Request: https://projects.blender.org/blender/blender/pulls/135306
Implement shortcuts for viewer nodes. Viewer nodes are now activated using the operator `bpy.ops.node.activate_viewer()` instead of activating the viewer by setting the node to active.
This also unifies the behavior with viewer shortcuts in the compositor (see attachment in the original PR).
Pull Request: https://projects.blender.org/blender/blender/pulls/134555
This patch adds the ability to snap to the frame range bounds in the VSE
timeline, on by default. End frame snap location is offset by 1 to
ensure the snap point aligns with the visible end frame boundary
(otherwise e.g. right handle of strip would be one frame short).
Timeline and preview snapping is also turned on by default using the
same versioning block.
Pull Request: https://projects.blender.org/blender/blender/pulls/135753
This PR enabled GPU based subdivision on Metal.
Most work is done in #135296.
- Metal max storage bindings for compute shaders were never set.
Some performance figures: Suzanne 6 subdivision levels
| Machine | CPU Subdivision | GPU Subdivision |
| --------------- | --------------- | --------------- |
| M1 Studio Ultra | 7fps | 12 fps |
| M2 Air | 3fps | 11 fps |
Pull Request: https://projects.blender.org/blender/blender/pulls/135628
This PR enabled GPU subdivision on Vulkan backend. Measured
performance is slower compared to CPU on my system. But it is
expected that other bottlenecks should be solved in order to
fully benefit from this feature.
We enable it so we keep track of the performance bottlenecks.
Pull Request: https://projects.blender.org/blender/blender/pulls/135777
draw_attribute_warnings() called in every attribute panel code.
Following function iterates through entire attribute list
mesh.attributes along with vgroup list to identify the colliding name.
This results in printing collision names in irrelavant panels. Now fixed
by passing relevant attributes to compare in `draw_attribute_warnings`.
First find colliding names, add them to the list if they exists in current attribute list
passed to the function
Pull Request: https://projects.blender.org/blender/blender/pulls/135495
As a small addition to the import node features for 4.5,
this simple node imports a text file as a string. Potential
use cases include retrieving text for motion graphics.
Currently this just allows .txt files. More extensions could
be allowed in the future.
Pull Request: https://projects.blender.org/blender/blender/pulls/135459
When accessing the key-map for tooltips it's important to use
the final "user" keymap, combine from "active" & "default".
Using the active keyconfig would only keys from key-maps that had
been modified.
This commit adds the `sculpt.mask_by_color` operator to the 'Mask' menu item in Sculpt Mode. This
allows users to access it via operator / property search. Additionally, the Redo panel is exposed
for general usage.
Pull Request: https://projects.blender.org/blender/blender/pulls/135210
Add this operator to the dropdown menu to the right of the attribute list
for curves and point cloud geometries. For these geometry types the
operator can run in edit mode too, unlike meshes.
This commits fixes a type error issue when reporting that a addon was
designed for a version of Blender newer than the current one.
Thanks to @Rakete for the fix.
Ref: !135392
Added entries for operators missing in the Curves edit mode context and
topbar menus as mentioned in #105253.
Ordered menu entries based on legacy and mesh menus but it's not
identical as the operator set is reduced. Prioritized keeping group
classification consistent between the menus when deriving the layout.
Pull Request: https://projects.blender.org/blender/blender/pulls/134935
