The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
This is the second try at this commit. The previous one had a typo
in it -- luckily, the tests caught the problem.
Calling `finish` after writing to generic attributes is currently necessary for
correctness. Previously, this was easy to forget. Now there is a check for this
in debug builds.
This commit ports the fillet curves node to the new curves data-block,
and moves the fillet node implementation to the geometry module to help
separate the implementation from the node.
The changes are similar to the subdivide node or resample node. I've
resused common utilities where it makes sense, though some things like
the iteration over attributes can be generalized further. The node
is now multi-threaded per-curve and inside each curve, and some buffers
are reused per curve to avoid many allocations.
The code is more explicit now, and though there is more boilerplate to
pass around many spans, the more complex logic should be more readable.
Differential Revision: https://developer.blender.org/D15346
In preparation for a larger change (D14162), some BLI_bitmap
functionality that could be submitted separately:
- Ability to declare a fixed size bitmap by-value, without extra
memory allocation: BLI_BITMAP_DECLARE
- Function to find the index of lowest unset bit:
BLI_bitmap_find_first_unset
- Test coverage of the above.
Reviewed By: Campbell Barton, Bastien Montagne
Differential Revision: https://developer.blender.org/D15454
The face merging code in exact boolean made an assumption that
the tesselated original face was manifold except at the boundaries.
This should be true but sometimes (e.g., if the input faces have
self-intersection, as happens in the example), it is not.
This commit makes face merging tolerant of such a situation.
It might leave some stray edges from triangulation, but it should
only happen if the input is malformed.
Note: the input may be malformed if there were previous booleans
in the stack, since snapping the exact result to float coordinates
is not guaranteed to leave the mesh without defects.
`GSpan` and spans based on virtual arrays were not default constructible
before, which made them hard to use sometimes. It's generally fine for
spans to be empty.
The main thing the keep in mind is that the type pointer in `GSpan` may
be null now. Generally, code receiving spans as input can assume that
the type is not-null, but sometimes that may be valid. The old #type() method
that returned a reference to the type still exists. It asserts when the
type is null.
This is just a theoretical improvement currently, I won't try to justify
it with some microbenchmark, but it should be better to use the
specialized single and span virtual arrays when slicing a `GVArray`,
since any use of `GVArrayImpl_For_SlicedGVArray` has extra overhead.
Differential Revision: https://developer.blender.org/D15361
This refactor had two main goals:
* Simplify the sampling code by using an algorithm with fewer special cases.
* Generalize the sampling to support non-sorted samples.
The `SampleSegmentHint` optimization was inspired by `ValueAccessor` from
OpenVDB and improves performance 2x in my test cases.
Differential Revision: https://developer.blender.org/D15348
Many existing importers/exporters do log the time it takes to system
console (some others log more information too). In particular, OBJ
(C++ & python), STL (C++ & python), PLY, glTF2 all log the time it
takes. However, neither USD nor Alembic do. And also it's harder to
know the time it takes there from a profiler, since all the work
normally is done on a background job and is split between several
threads (so you can't just find some top-level function and see how
much time it took).
This change:
- Adds import/export time logging to USD & Alembic importer/exporter,
- In the time utility class (also used by OBJ & STL), improve the
output formatting: 1) print only one decimal digit, 2) for long
times, print seconds and also produce a hours:minutes:seconds form.
Reviewed By: Michael Kowalski, Kévin Dietrich
Differential Revision: https://developer.blender.org/D15170
The memory manager includes both a GPUContext-local manager which allocates per-context resources such as Circular Scratch Buffers for temporary data such as uniform updates and resource staging, and a GPUContext-global memory manager which features a pooled memory allocator for efficient re-use of resources, to reduce CPU-overhead of frequent memory allocations.
These Memory Managers act as a simple interface for use by other Metal backend modules and to coordinate the lifetime of buffers, to ensure that GPU-resident resources are correctly tracked and freed when no longer in use.
Note: This also contains dependent DIFF changes from D15027, though these will be removed once D15027 lands.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D15277
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
This reduces the amount of code, and improves performance a bit by
doing more with less virtual method calls.
Differential Revision: https://developer.blender.org/D15293
This makes calculation of selected indices slightly faster when the
input is a virtual array (the direct output of various nodes like
Face Area, etc). The utility can be helpful for other areas that
need to find selected indices besides field evaluation.
With the face area node used as a selection with 4 million faces,
the speedup is 3.51 ms to 3.39 ms, just a slight speedup.
Differential Revision: https://developer.blender.org/D15127
Allow use of multiple fonts acting together like a fallback stack,
where if a glyph is not found in one it can be retrieved from another.
See D12622 for much more detail
Differential Revision: https://developer.blender.org/D12622
Reviewed by Brecht Van Lommel
srgb_to_linearrgb_v3_v3 is using an approximation of powf that is
SIMD. However, while the accuracy of it is ok, a larger issue is that
it produces different results on Intel compared to ARM architectures.
On ARM (e.g. AppleSilicon), the result of the SIMD code path is much
closer to the reference implementation. This seems to be because of
_mm_rsqrt_ps usage in _bli_math_fastpow512. The ARM/NEON code path
emulates inverse square root with a combination of vrsqrteq_f32
followed by two Newton-Raphson iterations, because blender uses the
SSE2NEON_PRECISE_SQRT define.
This commit adds similar NR iterations to the "actual SSE" code path
as well.
Max error of srgb->linear->srgb conversion roundtrip goes from
0.000211 down to about 0.000062.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D15193
The delaunay2d function, with mode CDT_CONSTRAINTS_VALID_BMESH_WITH_HOLES
sometimes didn't eat away all of the edges. Doing a prepass to remove
the outer edges until they hit the constraints solves this problem.
My benchmark which spend most time preparing function parameters
takes `250 ms` now, from `510 ms` before. This is mainly achieved by
doing less unnecessary work and by giving the compiler more inlined
code to optimize.
* Reserve correct vector sizes and use unchecked `append` function.
* Construct `GVArray` parameters directly in the vector, instead of
moving/copying them in the vector afterwards.
* Inline some constructors, because that allows the compiler understand
what is happening, resulting in less code.
This probably has negilible impact on the user experience currently,
because there are other bottlenecks.
Differential Revision: https://developer.blender.org/D15009
* Port over new code tables from Cycles
* Convert Rec.709 to scene linear for lookup table.
* Move code for wavelength and blackbody to IMB so they can access the
required transforms, which are not in blenlib.
* Remove clamping from blackbody shader to bypass the texture read.
Since it's variable now easiest to just always read from the texture
than pass additional parameters.
* Fold XYZ to RGB conversion into the wavelength table.
Ref T68926
This is useful without any functionality specific to attribute domains,
rename to `BLI_str_format_decimal_unit` to follow naming of a similar
function `BLI_str_format_byte_unit`.
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
The fix ensures that the reference count for `IShellItem *pSI` is decremented,
preventing a memory leak. For `IFileOperation *pfo` the decrement of the
reference count is only attempted when `CoCreateInstance` is successful.
Additionally, the gotos have been replaced with nested if/else statements.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D14681
The ported normal calculation from ceed37fc5c neglected to
use the tilt attribute to rotate the normals around the tangents.
This commit adds that behavior back, adding a new math header file
to avoid duplicating the rotation function for normalized axes.
Differential Revision: https://developer.blender.org/D14655
Prefer using immVertex3f when 3D shaders are used for 2D rendering due to overhead of vertex padding in hardware. CPU overhead is negligible.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D14494
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
