Previously, curves sculpt tools only worked on original data. This was
very limiting, because one could effectively only sculpt the curves when
all procedural effects were turned off. This patch adds support for curves
sculpting while looking the result of procedural effects (like deformation
based on the surface mesh). This functionality is also known as "crazy space"
support in Blender.
For more details see D15407.
Differential Revision: https://developer.blender.org/D15407
Oversight in b0da080c2c. The `session_uuid` operator property wouldn't
be checked by the invoke callback, and if neither the `filepath` nor the
`name` property were set, the File Browser would open.
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
A small regression as a result of adding a custom outline to the empty
virtual socket, which ended up overriding the colors when selected with
Shift+LMB.
Differential Revision: https://developer.blender.org/D15103
Show the supported geometry types returned by geometry
node socket declarations in the socket inspection tooltip.
Differential Revision: https://developer.blender.org/D14802
Main motivation is from T54314 where there was no way to read from a
Viewer image datablock after the compositor has run.
The only solution there was to do a full rerender (which obviously takes
much longer). Adding a handler avoids having to rerender.
This uses new syntax from rBf4456a4d3c97 and also adds "COMPOSITE" as a
job type that can be queried by `bpy.app.is_job_running`.
NOTE: there is another issue when multiple viewers are used and these
get active via RNA (compo execution is not triggered there yet -- unlike
when a viewer is selected in the Editor -- this is an issue of
`ED_node_set_active` vs. only `nodeSetActive`, but this will be tackled
separately)
Maniphest Tasks: T54314
Differential Revision: https://developer.blender.org/D15078
This is an extension of 4669178fc3, applying the same changes to
attributes chosen in the field inputs of the geometry nodes modifier.
If a UI/internal attribute is used, the attribute name button will
have a red alert. Adding a disabled hint is currently a bit more complex.
Also hide UI attributes in attribute search for the named attribute node.
Part of D14934
This commits corrects the calculation of the Frame Node label size,
making it independent of the 'Line Width' user preference.
Since `U.dpi` is actually DPI divided by `U.pixelsize` and `U.pixelsize`
is calculated from line-width multiplying by `U.pixelsize` undoes
the connection between line-width and label size.
It now stays the same, regardless of the line-width setting.
Reviewed By: Julian Eisel, Harley Acheson
Differential Revision: https://developer.blender.org/D14338
This is a follow up to rBbb0fc675822f313c5546a2498a162472c2571ecb.
Now the same kind of run-time data is added to nodes and sockets.
Differential Revision: https://developer.blender.org/D15060
Dropping would pass the name of the ID to drop to the properties of the
drop operator. This would then lookup the ID by name. With linking
and/or library overrides, multiple IDs of the same name and type may
exist, which is why the session UUID should be used instead. All
operators used for dropping support this now and the drop code passes
the session UUID instead of the name.
Also see 917c096be6 and 8f79fa9c67.
Some drop operators were already using the session UUIDs. This converts
the remaining ones. The "name" property is kept working as before, since
some scripts use this.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, which was the case for some of these operators, and
its value won't be remembered over multiple executions of the operator.
Both were not at all useful from what I can tell, and I doubt this was
done intentionally.
There are now some generalized helpers for passing IDs from drag & drop
to operators via operator properties, mostly introduced in 917c096be6
and 8f79fa9c67. These can be used in a bunch of places to reduce
duplicated code and explicitly share a common solution.
Side-effect: The "Name" property won't show up in the Adjust Last
Operation anymore, and its value won't be remembered over multiple
executions of the operator. Both were not at all useful from what I can
tell, and I doubt this was done intentionally.
Regression caused by [0] which changed node selection to use
PRESS for selection and CLICK_DRAG to transform the selection.
This conflicted with Alt-LMB which would select the node then
pass-though to node.background_sample, preventing the drag event
from being activated.
Resolve by only activating background-sample when the cursor
isn't over a node or socket.
[0]: 4c3e91e5f5
Geometry Nodes (new) icon. So far we were using the generic node-tree
icon for geometry nodes, not anymore.
The new icon is composed of 4 spheres that is a reference to the
original pebbles demo. Scattering points was also the turning point for
the project (which originally was focusing on dynamic effects), and to
this day is one of the first steps for everything procedural such as
hair.
Note that the modifier icon is still showing as white in the outliner.
The alternative is to be blue everywhere.
Patch review and feedback by Hans Goudey.
Icon creation in collaboration with Pablo Vazquez.
Use the same method for node selection and dragging that is used
in the 3D viewport and UV editor. Instead of relying on a modal
operator - use the keymap to handle click/drag events.
Details:
Failure to transform unselected nodes was caused by [0] & [1] however
detecting drag relied on specific behavior which I don't think we should
be depending on.
This error happened when selection was defined both in the key-map for
the tool and for the node-editor.
- The left mouse button would activate selection in both the tool
and "Node Editor" keymap.
- The first selection would return `FINISHED | PASS_THROUGH` when
selecting a previously unselected node.
- The same PRESS would trigger a second selection would return
`RUNNING_MODAL | PASS_THROUGH`,
(starting a NODE_OT_select as a modal operator).
- In 3.1 (with tweak events) the modal operator would then exit and
fall-back to the tweak event which would transform the selected
nodes.
- In 3.2 (as of [0]) the PRESS that starts the modal operator is
considered "handled" and prevents drag event from being detected.
The correct behavior in this case isn't obvious:
If a modal operator starts on pressing a button, using that same the
release to generate drag/click events is disputable.
Even in the case or 3.1 it was inconsistent as tweak events were
generated but click events weren't.
Note: after investigating this bug it turns out a similar issue already
existed in 2.91 and all releases afterwards. While the bug is more
obscure, it's also caused by the tweak event being interrupted as
described here, this commit resolves T81824 as well.
[0]: 4d0f846b93
[1]: 4986f71848
Reviewed By: Severin
Ref D14499
The root of the issue is that compositor is using refresh mechanism
to handle recalc.
The safest fix which does not require deep refactor is to check to
whether node space was tagged for refresh from listener (currently
it is listeners which are responsible for tackling compositor tree
recalc).
Differential Revision: https://developer.blender.org/D14856
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
After rB47276b847017, for certain socket types such as object or
material, the name of the item is not obtained correctly leading
the tooltip to display random non-character memory values as text.
Differential Revision: https://developer.blender.org/D14762
This patch adds the drag and drop strip previews in the VSE.
It also adds two new functions to the drag and drop API.
1. "draw_in_view" for callbacks that wants to draw elements in local viewport coordinates
2. "on_drag_start" that can be used for prefetching data only once at the start of the drag.
Reviewed By: Julian, Campbell
Differential Revision: http://developer.blender.org/D14560
* Adjust width based on node width, necessary to make the longer name below work.
* Show "X Named Attributes" in the overlay.
* Use "Accessed named attributes" in the tooltip.
Differential Revision: https://developer.blender.org/D14751
- Add missing doxy-section for Apply Parent Inverse Operator
- Use identity for None comparison in Python.
- Remove newline from operator doc-strings.
- Use '*' prefix multi-line C comment blocks.
- Separate filenames from doc-strings.
- Remove break after return.
This was possible with the gizmo, but no using the operator (e.g. from
the sidebar).
Now store original offsets and reset to these on calcel (ESC or RMB).
Maniphest Tasks: T97465
Differential Revision: https://developer.blender.org/D14704
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
Preserve multi socket link order when copying nodes or adding a new
group input sockets by linking directly to multi inputs from the group
input node's extension socket.
This is done by also copying the `multi_input_socket_index` when
the new links are created by copying existing or temporary links.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D14535
