The idea is to allow certain animation channels to be always visible in
animation editors. So, for example, one can pin Camera animation to the
editor so it is always possible to refine/tweak camera animation when
animating something else in the scene.
There is probably some more polishing required, and some current
limitations could be solved in the future but should be a good starting
point already.
Currently only works for object without recursing into deeper datablock
(so for example, it's not possible to pin object material animation).
Studio request by Colin Levy.
In addition to pack of conflicts listed below, also had to comment out particle part of new Alembic code... :/
Conflicts:
intern/ghost/intern/GHOST_WindowWin32.cpp
source/blender/blenkernel/BKE_effect.h
source/blender/blenkernel/BKE_pointcache.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/effect.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/rigidbody.c
source/blender/blenkernel/intern/smoke.c
source/blender/blenkernel/intern/softbody.c
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/gpu/intern/gpu_debug.c
source/blender/makesdna/DNA_object_types.h
source/blender/makesrna/intern/rna_particle.c
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
Drivers can use this to refer to the data which the driver is applied to,
useful for objects, bones, to avoid having to create a variable pointing to its self.
Currently "long keyframes" are only useful for indicating where stationary
holds occur. If however you try to create a "moving hold" (where the values
are slightly different, but in terms of overall effect, it's still a hold)
then it could get tricky to keep track of where these occur.
Now it's possible to tag such keyframes (using the keyframe types - RKEY)
as being part of a moving hold. These will not only be drawn differently
from normal keyframes, but they will also result in a "long keyframe"
being drawn between each pair of them, just like if they had been completely
stationary instead.
Currently the theming/styling of these is a bit rough. They reuse the existing
theme colours for long keyframes.
A long requested feature has been to have objects appear in alphabetical order
in the animation editors, so that it is easier to find where they occur. This
commit implements support for this.
The main sticking point has been the performance impact of having this sorting
happening all the time (as the actual list of "bases" cannot be modified, as the
old depsgraph still needs random-looking unsorted order of objects for scheduling
updates). However, it recently occurred to me that perhaps by restricting it to
the one case where the ordering actually matters (i.e. when we're getting the channel
list for drawing all channels, vs operating on them), and adding a toggle to turn the
sorting off in heavy scenes when it might bog down things, that it will probably
be acceptable enough in general. Furthermore, if things get really bad, we can investigate
putting in place some sort of caching scheme for this too - though hopefully the
new depsgraph will make that unnecessary (i.e. it doesn't sort the bases directly anymore).
This commit introduces a scale factor setting for scaling all keyframe indicators
in the Dopesheet Editor up/down, in order to make them easier to select. It is perhaps
most useful for keyframe types which are usually indicated using smaller keyframes
(e.g. breakdown), which may get tricky to quickly select.
Idea is to replace hard-to-track (id->lib != NULL) 'is linked datablock' check everywhere in Blender
by a macro doing the same thing. This will allow to easily spot those checks in future, and more importantly,
to easily change it (see work done in asset-engine branch).
Note: did not touch to readfile.c, since there most of the time 'id->lib' check actually concerns the pointer,
and not a check whether ID is linked or not. Will have a closer look at it later.
Reviewers: campbellbarton, brecht, sergey
Differential Revision: https://developer.blender.org/D2082
The "W" channel will get a yellowish colour (i.e. a blend between the X/R and
Y/G axis colours), while the XYZ will behave as they do for other transforms.
The create drivers operator should not use the "Transform Channel" variable type
when driving one transform with another on the same object/bone. Otherwise, you
end up with a situation which technically results in a bit of a pseudo-dependency
cycle.
To get this working the least effort, I've had to expose the helper functions
used by the lasso and circle select keyframe-test callbacks (which are generic)
and expose them for use by the GP keyframe editing code too. Hopefully in time
we clean this all up and just write the code once to operate on "keyframes"
This only works in the Action and Dopesheet modes (which operate on FCurve keyframes).
Support for Grease Pencil and Mask Keyframes though is still pending.
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
Sometimes the autokeying flags don't get set correctly (i.e. the "mode" flags
used for 'Add + Replace' vs 'Replace Only' aren't set), meaning that the old logic
would always fall through to the "replace only" case. When this happens, the resulting
behaviour can be quite strange and hard to debug. This fix prevents problems like
this from continuing to be an issue...
Not sure why, but ANIM_animdata_update() totally ignored NLAStrip type of bAnimListElem.
For now only added support for ANIM_UPDATE_DEPS type of update, don't know whether
others are needed in this case or not... time will say.
