In addition to pack of conflicts listed below, also had to comment out particle part of new Alembic code... :/
Conflicts:
intern/ghost/intern/GHOST_WindowWin32.cpp
source/blender/blenkernel/BKE_effect.h
source/blender/blenkernel/BKE_pointcache.h
source/blender/blenkernel/intern/cloth.c
source/blender/blenkernel/intern/depsgraph.c
source/blender/blenkernel/intern/dynamicpaint.c
source/blender/blenkernel/intern/effect.c
source/blender/blenkernel/intern/particle_system.c
source/blender/blenkernel/intern/pointcache.c
source/blender/blenkernel/intern/rigidbody.c
source/blender/blenkernel/intern/smoke.c
source/blender/blenkernel/intern/softbody.c
source/blender/depsgraph/intern/builder/deg_builder_relations.cc
source/blender/gpu/intern/gpu_debug.c
source/blender/makesdna/DNA_object_types.h
source/blender/makesrna/intern/rna_particle.c
When WITH_INPUT_NDOF is disabled, 3D mouse handling code is removed
from:
- GHOST (was mostly done, finished the job)
- window manager
- various editors
- RNA
- keymaps
The input tab of user prefs does not show 3D mouse settings. Key map
editor does not show NDOF mappings.
DNA does not change.
On my Mac the compiled binary is 42KB smaller after this change. It
runs fine WITH_INPUT_NDOF on or off.
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
Now all consistent and using term "properties region" instead of "properties panel". Ideally we had a more generic operator for all those.
Fixes T49006.
To make it easier to synchronise timing across multiple strips, if you add
markers locally to an action, these will show up in the NLA strip in the
NLA Editor. These markings can then be used to line up the start/end of
another strip, or even to make sure that the markers from two different
strips end up lining up.
By default, this is turned on, but it can be disabled (via the View menu)
if it adds too much visual noise.
This commit changes a lot of how IDs are handled internally, especially the unlinking/freeing
processes. So far, this was very fuzy, to summarize cleanly deleting or replacing a datablock
was pretty much impossible, except for a few special cases.
Also, unlinking was handled by each datatype, in a rather messy and prone-to-errors way (quite
a few ID usages were missed or wrongly handled that way).
One of the main goal of id-remap branch was to cleanup this, and fatorize ID links handling
by using library_query utils to allow generic handling of those, which is now the case
(now, generic ID links handling is only "knwon" from readfile.c and library_query.c).
This commit also adds backends to allow live replacement and deletion of datablocks in Blender
(so-called 'remapping' process, where we replace all usages of a given ID pointer by a new one,
or NULL one in case of unlinking).
This will allow nice new features, like ability to easily reload or relocate libraries, real immediate
deletion of datablocks in blender, replacement of one datablock by another, etc.
Some of those are for next commits.
A word of warning: this commit is highly risky, because it affects potentially a lot in Blender core.
Though it was tested rather deeply, being totally impossible to check all possible ID usage cases,
it's likely there are some remaining issues and bugs in new code... Please report them! ;)
Review task: D2027 (https://developer.blender.org/D2027).
Reviewed by campbellbarton, thanks a bunch.
* Reshuffled code for existing "View Frame" implementations, and removed leftover
comment from some of the the copy-and-paste used to build it.
* Added support for this operator in the NLA and Timeline
* Use an RNA enum callback for NLA FModifier types too
* Cleaned up tooltips for these operators in Graph and NLA editors
* Fix update notifiers after adding FModifiers in the Graph Editor
This brings the UI here more in line with the Constraints and Modifiers UI's.
TODO:
* The tooltips/descriptions on the operators now need fixing, as we can no longer
use custom tooltips when defining these buttons.
* The operators need to be fixed to only operate on the active data
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
Apparently this is the result of some sloppiness during 2.5 project and since then it confused people who were trying to understand the area-region relation (myself included).
Sorry if this causes merge conflicts for anyone, but at some point we really had to do it :/
We have callbacks for that, they also do some checks and help ensure things are done
correctly. Only place where this is assumed not true is blenloader (since here we
may affect refcount of library IDs as well...).
By popular request, restored the ability to shift-click on the X (unlink) button
to unlink the action (from the active action slot), clear the Fake User, and
also remove the NLA-stashed copy (only works for the current object/NLA stack though).
- Add blentranslation `BLT_*` module.
- moved & split `BLF_translation.h` into (`BLT_translation.h`, `BLT_lang.h`).
- moved `BLF_*_unifont` functions from `blf_translation.c` to new source file `blf_font_i18n.c`.
The issue was caused by the following construction:
def = env['SOMETHING']
defs.append('SOMETHING_MORE')
Since first assignment was actually referencing environment option it was totally
polluted hawing weird and wonderful side effects on all other areas of Blender.
With multiple strips in tweakmode, only the one tagged as being "active"
would get drawn in the correct colours, while all the others would just
get drawn as a selected strip instead.
To help make it more convenient to edit stashed actions, Shift-Tab
(i.e. holding down the Shift key, which "tabbing" into tweakmode as
usual to edit the action referenced by the active NLA strip) now flags
the NLA Track that the strip occupies as being "solo" too.
This allows you to use the NLA to select a stashed action, then Shift-Tab
to start editing it without any other actions in the NLA stack interfering.
Like the "Next/Previous Layer" tools in the Action Editor, this is designed
to help with checking on stashed actions.
After looking into this more carefully, I've found that we do in fact need a dedicate
operator to add some custom logic when trying to unlink an action from the editor/datablocks.
Specifically, this new operator does the following:
1) When in Tweak Mode, it shouldn't be possible to unlink the active action,
or else, everything turns to custard.
2) If the Action doesn't have any other users, the user should at least get
a warning that it is going to get lost.
3) We need a convenient way to exit Tweak Mode from the Action Editor
4) If none of the above apply, we can just unlink normally
This commit implements this for the Action Editor, with stubs for the NLA Editor too.
Those will be fixed next.
When renaming animation channels, the old names are no longer drawn behind the
text boxes anymore. This used to cause problems if the names were long, or
if text boxes were set to have transparent backgrounds.
Thanks to kopias for reporting on IRC.
* Strips in muted tracks are also drawn with dotted borders now to make it clearer
that they are not contributing.
TODO:
* Perhaps dotted should be used for protected, and opacity for muted instead?
Steps to reproduce:
1) Create an object, animated with shape keys
2) Copy it with Alt-D
3) Push action down to nla track
4) Select that track and delete it
In attached file 1-3 steps are completed.
{F138559}
Alexander (Blend4Web Team)
Reviewers: aligorith
Subscribers: yurikovelenov, Evgeny_Rodygin, valentin_b4w, AlexKowel
Differential Revision: https://developer.blender.org/D1015
The Toggle Muting operator was missing code to tag the animation to get recalculated.
This was also missing from a few other operators too, including Snap, and
Add/Paste FModifiers .
This merge-commit brings in a number of new features and workflow/UI improvements for
working with Grease Pencil. While these were originally targetted at improving
the workflow for creating 3D storyboards in Blender using the Grease Pencil,
many of these changes should also prove useful in other workflows too.
The main highlights here are:
1) It is now possible to edit Grease Pencil strokes
- Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions
to enter "Stroke Edit Mode". In this mode, many common editing tools will
operate on Grease Pencil stroke points instead.
- Tools implemented include Select, Select All/Border/Circle/Linked/More/Less,
Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete.
- Proportional Editing works when using the transform tools
2) Grease Pencil stroke settings can now be animated
NOTE: Currently drivers don't work, but if time allows, this may still be
added before the release.
3) Strokes can be drawn with "filled" interiors, using a separate set of
colour/opacity settings to the ones used for the lines themselves.
This makes use of OpenGL filled polys, which has the limitation of only
being able to fill convex shapes. Some artifacts may be visible on concave
shapes (e.g. pacman's mouth will be overdrawn)
4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing
has been added which draws strokes as a series of screen-aligned discs.
While this was originally a partial experimental technique at getting better
quality 3D lines, the effects possible using this technique were interesting
enough to warrant making this a dedicated feature. Best results when partial
opacity and large stroke widths are used.
5) Improved Onion Skinning Support
- Different colours can be selected for the before/after ghosts. To do so,
enable the "colour wheel" toggle beside the Onion Skinning toggle, and set
the colours accordingly.
- Different numbers of ghosts can be shown before/after the current frame
6) Grease Pencil datablocks are now attached to the scene by default instead of
the active object.
- For a long time, the object-attachment has proved to be quite problematic
for users to keep track of. Now that this is done at scene level, it is
easier for most users to use.
- An exception for old files (and for any addons which may benefit from object
attachment instead), is that if the active object has a Grease Pencil datablock,
that will be used instead.
- It is not currently possible to choose object-attachment from the UI, but
it is simple to do this from the console instead, by doing:
context.active_object.grease_pencil = bpy.data.grease_pencil["blah"]
7) Various UI Cleanups
- The layers UI has been cleaned up to use a list instead of the nested-panels
design. Apart from saving space, this is also much nicer to look at now.
- The UI code is now all defined in Python. To support this, it has been necessary
to add some new context properties to make it easier to access these settings.
e.g. "gpencil_data" for the datablock
"active_gpencil_layer" and "active_gpencil_frame" for active data,
"editable_gpencil_strokes" for the strokes that can be edited
- The "stroke placement/alignment" settings (previously "Drawing Settings" at the
bottom of the Grease Pencil panel in the Properties Region) is now located in
the toolbar. These were more toolsettings than properties for how GPencil got drawn.
- "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a
suggestion for an earlier discussion on developer.blender.org
- By default, the painting operator will wait for a mouse button to be pressed
before it starts creating the stroke. This is to make it easier to include
this operator in various toolbars/menus/etc. To get it immediately starting
(as when you hold down DKEy to draw), set "wait_for_input" to False.
- GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor
- Toolbar panels have been added to all the other editors which support these.
8) Pie menus for quick-access to tools
A set of experimental pie menus has been included for quick access to many
tools and settings. It is not necessary to use these to get things done,
but they have been designed to help make certain common tasks easier.
- Ctrl-D = The main pie menu. Reveals tools in a context sensitive and
spatially stable manner.
- D Q = "Quick Settings" pie. This allows quick access to the active
layer's settings. Notably, colours, thickness, and turning
onion skinning on/off.
