No functional changes.
Move the function ED_id_action_ensure to animrig,
and rename it to `id_action_ensure`.
This is in order to reduce references from animrig
to the editor code.
Pull Request: https://projects.blender.org/blender/blender/pulls/116101
The term `looptri` was used ambiguously for both single & arrays.
The term `tri` was also used, causing `tri->tri`.
Use terms:
- `looptris` for an array or when dealing with multiple items.
- `looptri` is used when dealing with a single item.
- `lt` for a single MLoopTri variables & arguments.
This was already a convention but not followed closely.
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
Due to changes in the build environment shader_builder wasn't able to
compile on macOs. This patch reverts several recent changes to CMake files.
* dbb2844ed9
* 94817f64b9
* 1b6cd937ff
The idea is that in the near future shader_builder will run on the buildbot as
part of any regular build to ensure that changes to the CMake doesn't break
shader_builder and we only detect it after a few days.
Pull Request: https://projects.blender.org/blender/blender/pulls/115929
Move the contents of `ANIM_bone_collections.h` into its C++
`ANIM_bone_collections.hh` sibling. Blender is C++ by now that we can do
without the C header.
No functional changes.
Inlining the functions is simpler nowadays, since there are utility
functions to copy spans and tag the mesh caches dirty. Also use an
array instead of a raw pointer for multires.
Resolves#103789
Implement the next phases of bounds improvement design #96968.
Mainly the following changes:
Don't use `Object.runtime.bb` for performance caching volume bounds.
This is redundant with the cache in most geometry data-block types.
Instead, this becomes `Object.runtime.bounds_eval`, and is only used
where it's actually needed: syncing the bounds from the evaluated
geometry in the active depsgraph to the original object.
Remove all redundant functions to access geometry bounds with an
Object argument. These make the whole design confusing, since they
access geometry bounds at an object level.
Use `std::optional<Bounds<float3>>` to pass and store bounds instead
of an allocated `BoundBox` struct. This uses less space, avoids
small heap allocations, and generally simplifies code, since we
usually only want the min and max anyway.
After this, to avoid performance regressions, we should also cache
bounds in volumes, and maybe the legacy curve and GP data types
(though it might not be worth the effort for those legacy types).
Pull Request: https://projects.blender.org/blender/blender/pulls/114933
Currently we have options to transfer the paint mask, face sets, and
color attributes to the new mesh created by voxel remesh. This doesn't
make use of the generic attribute design, where it would be clearer to
transfer all attributes with the same methods. That's reflected in the
code as well-- we do duplicate work for the mask and vertex colors, for
example.
This commit replaces the transfer options with a single checkbox for
all attributes. All attribute types on all domains are transferred with
basically the same method as the "Sample Nearest" node from geometry
nodes-- they take the value from the nearest source element of the same
domain. Face corners are handled differently than before. Instead of
retrieving the mixed value of all the corners from the nearest source
vertex, the value from the nearest corner of the nearest face.
---
Some timing information, showing that when interpolating the same
data, the attribute propagation is significantly faster than before.
Edge and corner attributes would add some cost (edges more than
corners), but might not always be present.
Before
```
voxel_remesh_exec: 3834.63 ms
BKE_shrinkwrap_remesh_target_project: 1141.17 ms
BKE_mesh_remesh_reproject_paint_mask: 689.35 ms
BKE_remesh_reproject_sculpt_face_sets: 257.14 ms
BKE_remesh_reproject_vertex_paint: 54.64 ms
BKE_mesh_smooth_flag_set: 0.15 ms
```
After
```
voxel_remesh_exec: 3339.32 ms
BKE_shrinkwrap_remesh_target_project: 1158.76 ms
mesh_remesh_reproject_attributes: 517.52 ms
```
Pull Request: https://projects.blender.org/blender/blender/pulls/115116
Slightly non-trivial linked collections hierarchy could cause 'Make
LibOverride' operation from 3DView fail, reporting that more than one
potential root collections were found.
Logic here was way to simple, now this error should only happen when
there are effectively more than one potential 'good' root collection
(i.e. when two unrelated collections both contain (directly or not) the
selected objects(s).
Move object runtime data to a separate header and allocate it separately
as `blender::bke::ObjectRuntime`. This is how node, mesh, curves, and
point cloud runtime data is stored.
Benefits:
- Allow using C++ types in object runtime data
- Reduce space required for Object struct in files
- Increase conceptual separation between DNA and runtime data
- Remove the need to add manual padding in runtime data
- Include runtime struct definition only in files that require it
Pull Request: https://projects.blender.org/blender/blender/pulls/113957
The distinction would start to become meaningless when we use C++
features in the older C header. The naming and lack of a proper
namespace should be enough to clarify the separation for now.
In Blender 4.0 Grease Pencil was showing up as "Grease Pencil (legacy)" in the UI in some places.
Since the current Grease Pencil is not replaced yet, it shouldn't be named this way in 4.0.
Pull Request: https://projects.blender.org/blender/blender/pulls/114531
No functional changes.
Moving the following functions
`action_fcurve_ensure` and
`action_fcurve_find`
from
`ANIM_fcurve.hh`/`fcurve.cc`
to
`ANIM_action.hh`/`action.cc`
This is an effort to ensure that the fcurve files don't need to know
about the container they are stored in so we can swap out
the container more easily.
Pull Request: https://projects.blender.org/blender/blender/pulls/114575
No functional changes.
Since the following functions are now in a C++ namespace, their prefix can be removed:
* ANIM_setting_get_rna_values -> get_rna_values
* ED_action_fcurve_find -> action_fcurve_find
* ED_action_fcurve_ensure -> action_fcurve_ensure
Pull Request: https://projects.blender.org/blender/blender/pulls/114450
The last good commit was 8474716abb.
After this commits from main were pushed to blender-v4.0-release. These are
being reverted.
Commits a4880576dc from to b26f176d1a that happend afterwards were meant for
4.0, and their contents is preserved.
Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
