The thickness in the deform mode was just correct if the radius when
drawing a stroke was set to 20. Now all factors that influence the
stroke thickness are considered in deform mode.
Differential Revision: https://developer.blender.org/D14691
This is for some animation styles that usually copy and paste keyframes and they want avoid that both frames look equal, but they don't want noise randomness changes in the inbetween frames.
The patch adds a new random `Mode` option to select when the noise change.
Reviewed By: pepeland
Maniphest Tasks: T97099
Differential Revision: https://developer.blender.org/D14566
When using an offset modifier on a grease pencil object, the performance
could be impacted due to the randomize option introduced by rB6a2bc40e0131.
Even if the option was not used (offset, rotation, scale set to zero), the modifier
would still compute the random transformation matrix.
The patch checks if the randomization is used and only then caluclates the matrix.
Reviewed By: #grease_pencil, antoniov
Differential Revision: https://developer.blender.org/D14553
The new created strokes were not setting the right `orig` pointers, so the select operator could not select the strokes and points.
Now, the original pointers are set in the new strokes. To set the values is necessary assign the original pointer from the reference stroke because in modifiers the stroke is evaluated, so we need back two levels: Eval->Eval->Orig
- Missing star prefix.
- Unnecessary indentation.
- Blank line after dot-points
(otherwise doxygen merges with the previous dot-point).
- Use back-slash for doxygen commands.
- Correct spelling.
This patch adds an option to only use every n-th segment of the
envelope result. This can be used to reduce the complexity of the
result.
Differential Revision: http://developer.blender.org/D14503
Bug introduced in the smooth function changes done in commit rBd4e1458db3a0e0eaf80219dc8e6d10cb27620793
Differential Revision: https://developer.blender.org/D14548
This has been broken for two years, since rB29f3af952725,
which retrieved the bounding box from an object and immediately
overwrote it with -1, 1. That commit had another problem though--
the modifier stack shouldn't use object level data, it should use
data from the previous modifier.
Differential Revision: https://developer.blender.org/D14524
Also solves two warnings from the previous similar commit,
f688e3cc31. The change to the grease pencil
modifier is quite suspicious, but doesn't change the behavior,
which was already broken.
Adds fading support for build modifier so it's not a hard cut off
Reviewed By: Antonio Vazquez (antoniov), Matias Mendiola (mendio)
Differential Revision: https://developer.blender.org/D14309
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
This new modifier creates a shape known as envelope. It connects all
points that are n points apart. There is also a mode which fits a
single stroke to the envelope shape that is determined by that rule.
For more details, refer to the patch.
Reviewed By: NicksBest, antoniov, frogstomp, mendio
Differential Revision: http://developer.blender.org/D14341
This patch maximizes the possible bounds for the dash and
gap parameters in the dot dash modifier. This makes e.g.
chopping up lines without gaps possible.
Differential Revision: http://developer.blender.org/D14428
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
This patch remove all duplicate code for the same Bake modifier logic.
Still some modifiers need custom bake functions and cannot use this generic bake.
If the scale in the offset modifier was set to a value lower than -1,
the object would get mirrored. The problem was, that the thickness
was set to 0 by that. This fix makes the thickness calculation only
use the absolute values.
Differential Revision: http://developer.blender.org/D14324
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
The new mode only builds the new strokes in each frame.
The code is assuming somebody uses "additive" drawing, so that each frame is different only in its NEW strokes. Already existing strokes are skipped.
I used a simple solution: Count the number of strokes in the previous frame and ignore this many strokes in the current frame.
Differential Revision: https://developer.blender.org/D14252
The subdivision modifier for Grease Pencil handles closed strokes
correctly now and does converge to the same shape as the mesh
subdivision surface.
Differential Revision: http://developer.blender.org/D14218
1. Now handles cyclic strokes correctly.
2. Added a sharp threshold value to allow preservation of sharp corners.
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14044
1. Now will remove lines if both adjacent faces are back face.
2. Added a check to respect material back face culling setting.
3. Changed label in the modifier to "Force Backface Culling" (which reflect more accurately with what the checkbox does).
Reviewed By: Antonio Vazquez (antoniov), Aleš Jelovčan (frogstomp)
Ref D14041
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Some curve objects don't have an evaluated mesh at all, but line art
currently assumes that all curve objects have one before converting
it to a mesh internally. Fix this by checking if the curve object has an
evaluated mesh before skipping it.
The remaining problem is that evalauted from non-mesh objects or
evaluated curves from non-curve objects, etc. will be ignored if
"Allow Duplicates" is off. That's a different problem though.
Differential Revision: https://developer.blender.org/D14036
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
