Overwriting UV map or vertex color data in Geometry nodes will move the
layers to another CustomData channel, and as such, will make attribute
lookup fail from the UVMap and Vertex Color nodes in EEVEE as the
CustomDataType will also be modified (i.e. no longer `CD_MTFACE` or
`CD_MCOL`).
As discussed in T93179, the solution is to use `CD_PROP_AUTO_FROM_NAME`
so that the render engine is able to find the attributes. This also makes
EEVEE emulate Cycles behaviour in this regard. `attr_load_uv` and
`attr_load_color` are also removed in favor of the generic attribute
API in the various GLSL shaders.
Although `CD_PROP_AUTO_FROM_NAME` is now used even for UV maps, the
active UV map is still used in case the attribute name is empty, to
preserve the old behavior.
Differential Revision: https://developer.blender.org/D13730
Goals:
* Better high level control over where devirtualization occurs. There is always
a trade-off between performance and compile-time/binary-size.
* Simplify using array devirtualization.
* Better performance for cases where devirtualization wasn't used before.
Many geometry nodes accept fields as inputs. Internally, that means that the
execution functions have to accept so called "virtual arrays" as inputs. Those
can be e.g. actual arrays, just single values, or lazily computed arrays.
Due to these different possible virtual arrays implementations, access to
individual elements is slower than it would be if everything was just a normal
array (access does through a virtual function call). For more complex execution
functions, this overhead does not matter, but for small functions (like a simple
addition) it very much does. The virtual function call also prevents the compiler
from doing some optimizations (e.g. loop unrolling and inserting simd instructions).
The solution is to "devirtualize" the virtual arrays for small functions where the
overhead is measurable. Essentially, the function is generated many times with
different array types as input. Then there is a run-time dispatch that calls the
best implementation. We have been doing devirtualization in e.g. math nodes
for a long time already. This patch just generalizes the concept and makes it
easier to control. It also makes it easier to investigate the different trade-offs
when it comes to devirtualization.
Nodes that we've optimized using devirtualization before didn't get a speedup.
However, a couple of nodes are using devirtualization now, that didn't before.
Those got a 2-4x speedup in common cases.
* Map Range
* Random Value
* Switch
* Combine XYZ
Differential Revision: https://developer.blender.org/D14628
This is to make the codegen and shading nodes object type agnostic. This
is essential for flexibility of the engine to use the nodetree as it see
fits.
The essential volume attributes struct properties are moved to the
`GPUMaterialAttribute` which see its final input name set on creation.
The binding process is centralized into `draw_volume.cc` to avoid
duplicating the code between multiple engines. It mimics the hair attributes
process.
Volume object grid transforms and other per object uniforms are packed into
one UBO per object. The grid transform is now based on object which simplify
the matrix preparations.
This also gets rid of the double transforms and use object info orco factors
for volume objects.
Tagging @brecht because he did the initial implementation of Volume Grids.
This commit removes all EEVEE specific code from the `gpu_shader_material*.glsl`
files. It defines a clear interface to evaluate the closure nodes leaving
more flexibility to the render engine.
Some of the long standing workaround are fixed:
- bump mapping support is no longer duplicating a lot of node and is instead
compiled into a function call.
- bump rewiring to Normal socket is no longer needed as we now use a global
`g_data.N` for that.
Closure sampling with upstread weight eval is now supported if the engine needs
it.
This also makes all the material GLSL sources use `GPUSource` for better
debugging experience. The `GPUFunction` parsing now happens in `GPUSource`
creation.
The whole `GPUCodegen` now uses the `ShaderCreateInfo` and is object type
agnostic. Is has also been rewritten in C++.
This patch changes a view behavior for EEVEE:
- Mix shader node factor imput is now clamped.
- Tangent Vector displacement behavior is now matching cycles.
- The chosen BSDF used for SSR might change.
- Hair shading may have very small changes on very large hairs when using hair
polygon stripes.
- ShaderToRGB node will remove any SSR and SSS form a shader.
- SSS radius input now is no longer a scaling factor but defines an average
radius. The SSS kernel "shape" (radii) are still defined by the socket default
values.
Appart from the listed changes no other regressions are expected.
Solves compilation warning with Clang, and moves manipulation with
DNA structures to the designed way for C++.
The tests and few other places are update to the new code by Jacques.
Ref T96847
Maniphest Tasks: T96847
Differential Revision: https://developer.blender.org/D14625
This patch adds color attributes to TexPaintSlot. This allows an easier selection
when painting color attributes.
Previously when selecting a paint tool the user had to start a stroke, before the
UI reflected the correct TexPaintSlot. Now when switching the slot the active
tool is checked and immediate the UI is drawn correctly.
In the future the canvas selector will also be used to select an image or image texture node
to paint on. Basic implementation has already been done inside this patch.
A limitation of this patch is that is isn't possible anymore to rename images directly from
the selection panel. This is currently allowed in master. But as CustomDataLayers
aren't ID fields and not owned by the material supporting this wouldn't be easy.
{F12953989}
In the future we should update the create slot operator to also include color attributes.
Sources could also be extended to use other areas of the object that use image textures
(particles, geom nodes, etc... ).
Reviewed By: brecht
Maniphest Tasks: T96709
Differential Revision: https://developer.blender.org/D14455
Change uses of "Hair" in Render Settings UI in the property editor
and the "Hair Info" node to use the "Curves" name to reflect the
design described in T95355, where hair is just a use case of a more
general curves data type.
While these settings still affect the particle hair system,
the idea is that if we have to choose one naming scheme to align
with, we should choose the option that aligns with future plans
and current development efforts, especially since the particle
system is considered a legacy feature.
A few notes:
- "Principled Hair BSDF" is not affected since it's meant for hair.
- Python API property identifiers are not affected.
Differential Revision: https://developer.blender.org/D14573
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
Connecting to some sockets of a few nodes via the drag link search
would fail and trigger an assert, because the picked socket wasn't
available. This was due to some sockets only being available with
certain settings.
This patch fixes these cases by adding the availability conditions of
the socket to the node declaration with the `make_available` method
or manually adding a `node_link_gather_search` function.
Differential Revision: https://developer.blender.org/D14283
Ever since d5b72fb06c, shader nodes have been in the
`blender::nodes` namespace, so they don't need to use that to access
Blender's C++ types and functions.
Somehow exposed after 943b919fe8, linking could fail because
bf_nodes was not properly configured as a dependency of bf_nodes_shader.
Also add the dependency to the geometry nodes module.
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
An alpha component can be specified for an object's color. This adds an alpha
socket to the object info shader node allowing for the alpha component of the
object's color to be accessed in the shader editor.
Differential Revision: https://developer.blender.org/D14141
This patch reverses the dependency between `BLI_math_vec_types.hh` and
`BLI_math_vector.hh`. Now the higher level `blender::math` functions
depend on the header that defines the types they work with, rather than
the other way around.
The initial goal was to allow defining an `enable_if` in the types header
and using it in the math header. But I also think this operations to types
dependency is more natural anyway.
This required changing the includes some files used from the type
header to the math implementation header. I took that change a bit
further removing the C vector math header from the C++ header;
I think that helps to make the transition between the two systems
clearer.
Differential Revision: https://developer.blender.org/D14112
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
A Bump node without a Height input is meaningless and does nothing.
As such, it is available as an old workaround that allows making Node
Group inputs that default to normal when not connected, by routing
via a no-op Bump node before doing math.
Cycles specifically recognizes this use case and either bypasses
the node, or converts it into a Geometry Normal node, but Eevee
was still evaluating it as usual. That incurred performance cost,
and also normalized the vector unlike Cycles.
This implements the same bypass logic for Eevee. Since I'm not
sure if it's possible to totally remove the node at this stage,
it emits a no-op function call to copy the input vector.
Differential Revision: https://developer.blender.org/D14045
This patch makes it possible to set the UI color of a node's
header bar and override the default from the node's typeinfo.
Currently the color is taken from the `.nclass`
member of the node's bNodeType->TypeInfo struct.
This is created once when registering the node.
The TypeInfo is used for both UI and non-UI functionality.
Since the TypeInfo is shared, the header bar for the node
can't be changed without changing all nodes of that type.
The Map Range node is shown as a `Converter` or blue color by default.
This patch allows this to be changed dynamically to `Vector` or purple.
This is done by adding a `ui_class` callback to node typeinfo struct.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D13936
Previously, macros were ifdefed using the cmake option `WITH_INTERNATIONAL`
However, the is unnecessary as withen the functions themselves have checks for building without internationalization.
This also means that many `add_definitions(-DWITH_INTERNATIONAL)` are also unnecessary.
Reviewed By: mont29, LazyDodo
Differential Revision: https://developer.blender.org/D13929
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
This fixes a regression from rBa0edee712a79239133ff840f911f6416d4c41855.
Issue being the curve map not being initialized in the GPU shader function.
Fixes T95221
`node_exec` had some code that was specific to texture/shader nodes.
These functions arent used outside there module so limit there declarations.
Also make a function static that is only used in `node_exec.c`
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13899
With (center) position, radius and random value outputs.
Eevee does not yet support rendering point clouds, but an untested
implementation of this node was added for when it does.
Ref T92573
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:`float2`) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the `blender::math` namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
####Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others
we currently don't have (uintX, intX). All these variations were
asking for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector
functions should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the `BLI_(float|double|mpq)(2|3|4).hh` is a
bit of a let down. Most clases are incomplete, out of sync with each
others with different codestyles, and some functions that should be
static are not (i.e: `float3::reflect()`).
####Upsides:
- Still support `.x, .y, .z, .w` for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types
and can be restricted to certain types. Also template specialization
let us define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance
is the same.
####Downsides:
- Might impact debugability. Though I would arge that the bugs are
rarelly caused by the vector class itself (since the operations are
quite trivial) but by the type conversions.
- Might impact compile time. I did not saw a significant impact since
the usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length.
For instance, one can't call `len_squared_v3v3` in
`math::length_squared()` and call it a day.
- Type cast does not work with the template version of the `math::`
vector functions. Meaning you need to manually cast `float *` and
`(float *)[3]` to `float3` for the function calls.
i.e: `math::distance_squared(float3(nearest.co), positions[i]);`
- Some parts might loose in readability:
`float3::dot(v1.normalized(), v2.normalized())`
becoming
`math::dot(math::normalize(v1), math::normalize(v2))`
But I propose, when appropriate, to use
`using namespace blender::math;` on function local or file scope to
increase readability.
`dot(normalize(v1), normalize(v2))`
####Consideration:
- Include back `.length()` method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement. It felt
like too much for what we need and would be difficult to extend / modify
to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches `delaunay_2d.cc` and the intersection code. I would like
to know @howardt opinion on the matter.
- The `noexcept` on the copy constructor of `mpq(2|3)` is being removed.
But according to @JacquesLucke it is not a real problem for now.
I would like to give a huge thanks to @JacquesLucke who helped during this
and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: https://developer.blender.org/D13791
This patch implements the vector types (i.e:float2) by making heavy
usage of templating. All vector functions are now outside of the vector
classes (inside the blender::math namespace) and are not vector size
dependent for the most part.
In the ongoing effort to make shaders less GL centric, we are aiming
to share more code between GLSL and C++ to avoid code duplication.
Motivations:
- We are aiming to share UBO and SSBO structures between GLSL and C++.
This means we will use many of the existing vector types and others we
currently don't have (uintX, intX). All these variations were asking
for many more code duplication.
- Deduplicate existing code which is duplicated for each vector size.
- We also want to share small functions. Which means that vector functions
should be static and not in the class namespace.
- Reduce friction to use these types in new projects due to their
incompleteness.
- The current state of the BLI_(float|double|mpq)(2|3|4).hh is a bit of a
let down. Most clases are incomplete, out of sync with each others with
different codestyles, and some functions that should be static are not
(i.e: float3::reflect()).
Upsides:
- Still support .x, .y, .z, .w for readability.
- Compact, readable and easilly extendable.
- All of the vector functions are available for all the vectors types and
can be restricted to certain types. Also template specialization let us
define exception for special class (like mpq).
- With optimization ON, the compiler unroll the loops and performance is
the same.
Downsides:
- Might impact debugability. Though I would arge that the bugs are rarelly
caused by the vector class itself (since the operations are quite trivial)
but by the type conversions.
- Might impact compile time. I did not saw a significant impact since the
usage is not really widespread.
- Functions needs to be rewritten to support arbitrary vector length. For
instance, one can't call len_squared_v3v3 in math::length_squared() and
call it a day.
- Type cast does not work with the template version of the math:: vector
functions. Meaning you need to manually cast float * and (float *)[3] to
float3 for the function calls.
i.e: math::distance_squared(float3(nearest.co), positions[i]);
- Some parts might loose in readability:
float3::dot(v1.normalized(), v2.normalized())
becoming
math::dot(math::normalize(v1), math::normalize(v2))
But I propose, when appropriate, to use
using namespace blender::math; on function local or file scope to
increase readability. dot(normalize(v1), normalize(v2))
Consideration:
- Include back .length() method. It is quite handy and is more C++
oriented.
- I considered the GLM library as a candidate for replacement.
It felt like too much for what we need and would be difficult to
extend / modify to our needs.
- I used Macros to reduce code in operators declaration and potential
copy paste bugs. This could reduce debugability and could be reverted.
- This touches delaunay_2d.cc and the intersection code. I would like to
know @Howard Trickey (howardt) opinion on the matter.
- The noexcept on the copy constructor of mpq(2|3) is being removed.
But according to @Jacques Lucke (JacquesLucke) it is not a real problem
for now.
I would like to give a huge thanks to @Jacques Lucke (JacquesLucke) who
helped during this and pushed me to reduce the duplication further.
Reviewed By: brecht, sergey, JacquesLucke
Differential Revision: http://developer.blender.org/D13791
Currently, most node buttons are defined in `drawnode.cc` however,
this is inconvenient because it requires editing many files when adding new nodes.
The goal is to minimize the number of files needed to add or update a node.
This commit moves most of the node layout functions for shader nodes into their respected
source/blender/nodes/shader/nodes file.
In the future, these functions will be simplified to node_layout.
Some nodes were left in `drawnode.cc` as this would require duplicating code
while this is likely fine it is best to leave that to a seperate commit.
