Cryptomatte is a standard to efficiently create mattes for compositing. The
renderer outputs the required render passes, which can then be used in the
compositor to create masks for specified objects. Unlike the Material and Object
Index passes, the objects to isolate are selected in compositing, and mattes
will be anti-aliased.
Cryptomatte was already available in Cycles this patch adds it to the EEVEE
render engine. Original specification can be found at
https://raw.githubusercontent.com/Psyop/Cryptomatte/master/specification/IDmattes_poster.pdf
**Accurate mode**
Following Cycles, there are two accuracy modes. The difference between the two
modes is the number of render samples they take into account to create the
render passes. When accurate mode is off the number of levels is used. When
accuracy mode is active, the number of render samples is used.
**Deviation from standard**
Cryptomatte specification is based on a path trace approach where samples and
coverage are calculated at the same time. In EEVEE a sample is an exact match on
top of a prepared depth buffer. Coverage is at that moment always 1. By sampling
multiple times the number of surface hits decides the actual surface coverage
for a matte per pixel.
**Implementation Overview**
When drawing to the cryptomatte GPU buffer the depth of the fragment is matched
to the active depth buffer. The hashes of each cryptomatte layer is written in
the GPU buffer. The exact layout depends on the active cryptomatte layers. The
GPU buffer is downloaded and integrated into an accumulation buffer (stored in
CPU RAM).
The accumulation buffer stores the hashes + weights for a number of levels,
layers per pixel. When a hash already exists the weight will be increased. When
the hash doesn't exists it will be added to the buffer.
After all the samples have been calculated the accumulation buffer is processed.
During this phase the total pixel weights of each layer is mapped to be in a
range between 0 and 1. The hashes are also sorted (highest weight first).
Blender Kernel now has a `BKE_cryptomatte` header that access to common
functions for cryptomatte. This will in the future be used by the API.
* Alpha blended materials aren't supported. Alpha blended materials support in
render passes needs research how to implement it in a maintainable way for any
render pass.
This is a list of tasks that needs to be done for the same release that this
patch lands on (Blender 2.92)
* T82571 Add render tests.
* T82572 Documentation.
* T82573 Store hashes + Object names in the render result header.
* T82574 Use threading to increase performance in accumulation and post
processing.
* T82575 Merge the cycles and EEVEE settings as they are identical.
* T82576 Add RNA to extract the cryptomatte hashes to use in python scripts.
Reviewed By: Clément Foucault
Maniphest Tasks: T81058
Differential Revision: https://developer.blender.org/D9165
This adds a new property to the sculpt vertex color paint brush to limit
the area of the brush that is going to be used to sample the wet paint
color. This is exactly the same concept as normal radius and area radius
that exist for sculpting brushes for sampling the surface depth and
orientation.
When working near color hard edges, this allows to prevent the color
from the other side of the edge to blend into the wet paint.
With 1.0 (the previous default) wet paint radius, as soon as the brush touches
one vertex of the other color, the wet paint mix color changes, making it
impossible to maintain the border between the two colors.
Reviewed By: sergey, dbystedt, JulienKaspar
Differential Revision: https://developer.blender.org/D9587
During the development of the new nodes in the `geometry-nodes` branch
the color of the new nodes wasn't considered, so all of the nodes ended
up red, the color for "input" nodes. This patch introduces two new
colors, one for "Geometry" and one for "Attributes". There are only two
attribute nodes currently, but the next sprint will add two more,
attribute mix, and sample from texture. The attribute nodes are
conceptually different enough from the nodes that modify the geometry
that they deserve their own color.
Differential Revision: https://developer.blender.org/D9682
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
The Vertex Weight Edit Modifier already got the Custom Curve, there was no
real reason for the proximity not to have it as well.
With some fixes by Bastien Montagne (@mont29).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9594
As proposed in T74432 and already implemented in several commits,
"region" is the preferred name for `ARegion` variables, rather than
any variant of "ar". This commit changes a few "ar" variables that have
popped up over time and also adjusted names of variants like "arnew".
Ensure consistent order of pose bones. Now it should always match the
one from bones in armature obdata (as exposed by e.g. RNA, i.e.
children-first).
Previously when some pose bones would need to be added or removed from a
pose due to changes in the bone armature, or if bones in armature were
re-ordered, the bones order in pose would not match anymore the one from
armature, and could even become different between e.g. a proxy and its
linked source.
This was not really nice, but not a big issue before either. But with
diffing process of override, consistent order of items between reference
linked collection and local override one is crucial.
Reviewed By: #animation_rigging, sybren
Maniphest Tasks: T82758
Differential Revision: https://developer.blender.org/D9646
Previously, the alternate row color in the Video Sequence Editor was
just a shaded version of the editor's background color. This makes it
theme-able just like in the file browser and outliner, although the
default color is very slightly different.
Differential Revision: https://developer.blender.org/D9634
This adds an invert toggle for the outliner object state filters.
There are some cases where we want a filter for invertable states (Selected,
Unselected) and having a single toggle to invert the filter reduces the
number of separate filter types needed. This removes the "Hidden" filter
which can now be replicated with an inverted "Visible" filter.
Differential Revision: https://developer.blender.org/D9598
The icons originally chosen for the collection colors were selected
during development and had a few issues with contrast in the light
theme, and the gray color was not a good choice against the default gray
backgrounds.
The new colors are more readable in both default Blender themes. Gray
was replaced with pink.
Differential Revision: https://developer.blender.org/D9504
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
This patch adds an opacity slider to the wireframe overlay. The previous
wireframe in dense geometry scenes could be too dark and sometimes the
user just wants an impression of the geometry during modelling.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D7622
Move the "Show Group Colors" toggle from a per-editor option to a single
user preference in the Animation preferences. The Grease Pencil
animation channel side panel allows picking a channel color; this now
shows a message when channel colors are disabled.
The old "Show Group Colors" toggle had to be set per editor, and was on
by default. This meant that disabling group colors would require an
action for every file, for every editor. It is very hard to select a
color that works both as bone color in the 3D Viewport (needs to be
bright there) as well as the channel list (needs to be dark there), most
animators turn channel list colors off.
Differential Revision: https://developer.blender.org/D9391
"Camera Parent Lock" can be useful when rigging cameras, but it is not
intuitive, and has also generated a lot of confusion (bug reports).
This is because it breaks the fundamental parent <-> child relationship
conventions in Blender, and there is no indication that it's intended
without diving into the preferences.
This commit moves the setting to the object level, and exposes it in
the relations panel in the property editor. It is exposed for every
object type because any object type can be "View Locked" in the 3D view.
The property description is also updated to reflect this change and be
more specific without getting too long.
In the future this could become a more general feature of the transform
system, but for now it is limited to "Lock Camera to View".
Differential Revision: https://developer.blender.org/D9239
Replace BKE_sequencer wirh SEQ_render or SEQ_proxy prefixes.
In cases where function is very generic, only SEQ prefix is used.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9439
This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
