Instead of having the Rigify meta-rigs directly in the 'Add → Armature`
menu, move them into 'Add → Armature → Rigify Meta-Rigs`.
This also removes the " (Meta-Rig)" suffix from every individual
meta-rig menu item.
This serves multiple purposes:
- It's now clear that these meta-rigs come from Rigify.
- The built-in 'Single Bone' armature now has similar visual weight as
the 'Rigify Meta-Rigs' menu item.
- Opens up the menu in a fairer way to other add-ons, to add their own
entries in a similar way.
Pull Request: https://projects.blender.org/blender/blender/pulls/123833
Run `make format` to reformat the Rigify code. It now adheres to the
global Blender code style standard, rather than having its own style.
Most of the changes are simply adding spaces around operators, newlines
below docstrings, and changing some indentation.
Note that this does not reformat any stored-as-multiline-strings code
blocks.
No functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/123833
The fix is to set local-space Limit Rotation constraints to use the
legacy behavior from pre-4.2. The legacy behavior isn't meaningful/
useful for other spaces, so we leave those constraints alone.
This is one part of a two-part fix for blender/blender#123105. The other part
is blender/blender#123361, which adds the Legacy Behavior option to the Limit
Rotation constraint.
Reviewed-on: https://projects.blender.org/extensions/rigify/pulls/4
Reviewed-by: Sybren A. Stüvel <sybren@blender.org>
Move Rigify from the external add-ons repository into
`scripts/addons_core`.
This commit adds Rigify, from the latest revision in [the add-ons
repo][addons]. It contains work by the following authors:
202 Alexander Gavrilov
67 Campbell Barton
58 Nathan Vegdahl
31 Lucio Rossi
24 Demeter Dzadik
10 Brecht Van Lommel
8 Dalai Felinto
7 Bastien Montagne
7 Sybren A. Stüvel
5 Damien Picard
4 meta-androcto
3 Ines Almeida
2 Jonathan Smith
2 ZanQdo
1 Aaron Carlisle
1 Andrej730
1 Hans Goudey
1 Luca Bonavita
1 Patrick Huang
1 Sergey Sharybin
1 Thomas Dinges
For the full history see the read-only [add-ons repository][addons].
Rigify has existed briefly as an extension on the extensions platform,
and commits were made to Rigify's extension repository (which is
different from the above-mentioned add-ons repository). That repository
will be deleted soon. Its commits that actually changed Rigify will be
committed as followups to this commit. Some commits were necessary to
turn the add-on into an extension; those will be ignored, as they're no
longer relevant.
[addons]: https://projects.blender.org/blender/blender-addons/src/rigify
Ref: !121825
Pull Request: https://projects.blender.org/blender/blender/pulls/123833
This was originally introduced on c6e452d865.
A subsequent Cleanup commit (c3d18854f3) changed this further,
increasing the gap a few extra pixels.
Since no functional/visual change should ever come with a cleanup commit
I'm treating this small regression as a bug, fixed by this commit.
There was something right about c3d18854f3, and one of the align=True
is indeed not needed.
The BLT_I18N_MSGID_MULTI_CTXT() macro allows extracting a single
message into up to 16 different contexts. The regex to do that was
slightly wrong because it did not account for the macro potentially
ending with a ",".
The contexts for "New" were also sorted.
Pull Request: https://projects.blender.org/blender/blender/pulls/123793
In the case of user managed files we can't rely on paths to remove
being directories, they could be symbolic links as developers may point
to their own repository. While unlikely the paths to remove could
be files too.
Use a wrapper for shutil.rmtree(..) that handles symlinks & files,
use when removing paths that are expected to be directories from user
managed locations.
This implements a von-Kries-style chromatic adaption using the Bradford matrix.
The adaption is performed in scene linear space in the OCIO GLSL shader, with
the matrix being computed on the host.
The parameters specify the white point of the input, which is to be mapped to
the white point of the scene linear space. The main parameter is temperature,
specified in Kelvin, which defines the blackbody spectrum that is used as the
input white point. Additionally, a tint parameter can be used to shift the
white point away from pure blackbody spectra (e.g. to match a D illuminant).
The defaults are set to match D65 so there is no immediate color shift when
enabling the option. Tint = 10 is needed since the D-series illuminants aren't
perfect blackbody emitters.
As an alternative to manually specifying the values, there's also a color
picker. When a color is selected, temperature and tint are set such that this
color ends up being balanced to white.
This only works if the color is close enough to a blackbody emitter -
specifically, for tint values within +-150. Beyond this, there can be ambiguity
in the representation.
Currently, in this case, the input is just ignored and temperature/tint aren't
changed. Ideally, we'd eventually give UI feedback for this.
Presets are supported, and all the CIE standard illuminants are included.
One part that I'm not quite happy with is that the tint parameter starts to
give weird results at moderate values when the temperature is low.
The reason for this can be seen here:
https://commons.wikimedia.org/wiki/File:Planckian-locus.png
Tint is moving along the isotherm lines (with the plot corresponding to +-150),
but below 4000K some of that range is outside of the gamut. Not much can
be done there, other than possibly clipping those values...
Adding support for this to the compositor should be quite easy and is planned
as a next step.
Pull Request: https://projects.blender.org/blender/blender/pulls/123278
The extensions UI was aligning all buttons then adding a separator.
Simplify the layout by removing align which removes the need for an
explicit separator.
Prevent potential problems from untrusted XML (typically themes)
traversing into data outside the intended targets.
From what I can tell it's not currently possible but changes to RNA
could allow for this which would likely go by unnoticed.
Further details in code-comments.
It was too easy to click on Install by mistake, while trying to click on
the "⌄" menu. This is particulary problematic since we enable add-ons by
default.
Co-authored by: Pablo Vazquez, based on (informal) report by Campbell Barton.
Caused by a6ed013baa
Tags live on the `AssetMetaData` of an `AssetRepresentation` (so
`metadata` in py),
`asset_data`(also pointing to `AssetMetaData`) is a member of
`FileSelectEntry` only [which the above commit tried to get rid off...]
Pull Request: https://projects.blender.org/blender/blender/pulls/123818
Add utility class to check extension visibility to remove
incomplete logic that was duplicated into operator code.
Also minor refactoring to reduce the number of arguments passed
to internal function.s
This PR adds stroke stabilization settings for the Sculpt mode lasso
tools:
* Mask
* Hide
* Trim
* Face Set
Only Sculpt tools have a user facing change, even though this was
implemented in `WM_gesture_lasso_modal` and related methods. Other
modes may choose to add these settings and toggles.
## Implementation
The implemented functionality is similar to the Annotate tool in both
interpolation of the new point and drawing the UI hint that
stabilization is happening.
The `radius` and `factor` properties have similar bounds as the same
Brush properties. All values are stored on a per-operator level, not on
a scene or otherwise global tool level.
Based off of [1].
[1] - https://blender.community/c/rightclickselect/ZWG5/
Pull Request: https://projects.blender.org/blender/blender/pulls/122062
Disambiguate
- "Thickness": use "Material" for EEVEE's thickness material setting.
- "Generated": use "Texture" for texture coordinates, "Image" for
image source, keep default context for animation keyframe types.
Translate
- Split "Online access required to (check for|install) updates..."
into 2x2 messages individually translatable.
- "Geometry" input in bake node.
- "New" for the Palette ID: extract it as part of the
BLT_I18N_MSGID_MULTI_CTXT for "New".
Some issues reported by Gabriel Gazzán and Satoshi Yamasaki.
Pull Request: https://projects.blender.org/blender/blender/pulls/123404
This changes the sorting for the installed extensions.
- Update.
- Enable.
- A-Z.
Don't use A-Z for "Available" extensions to prevent name manipulation
to bring an extension up on the ranks.
Match the design of !123728, rewritten to support sorting across
multiple repositories and update tags which weren't handled in the PR.
Details:
- Remove the "Filter" popover & the option "Updates Available"
since updates are now shown first.
- Add an iterator to for visible extensions to de-duplicate logic which
was copied for code that scanned for tags.
- Split out logic for drawing an extension into it's own function.
- Tags are now calculated based on visible extensions limited by search.
Provide a convenient way to access a writable directory for extensions.
This will typically be accessed via:
bpy.utils.extension_path_user(__package__, create=True)
This API is provided as some extensions on extensions.blender.org
are writing into the extensions own directory which is error prone:
- The extensions own directory is removed when upgrading.
- Users may not have write access to the extensions directory,
especially with "System" repositories which may be on shared network
drives for example.
These directories are only removed when:
- Uninstalling the extension.
- Removing the repository and its files.
Recently, `volume` property has been added to scene strips. This causes
only volume property to be animated when adding fades with `fades_add`
operator.
Add fades to volume and opacity properties if these are available.
Pull Request: https://projects.blender.org/blender/blender/pulls/123236
select_box operator needs different context in preview and sequencer
regions. It wasn't specified, so it defaulted to sequencer context and
wasn't working in preview.
This PR sets poll for region and sets correct context for preview. This
also means shortcut appears on menu item in preview now.
Pull Request: https://projects.blender.org/blender/blender/pulls/123757
This was previously named `UV` in the UI.
Now renamed to the more appropriate `Rotation` since
it controls the random rotation of the texture on
each stroke point.
Otherwise implements the same functionality as GPv2.
Pull Request: https://projects.blender.org/blender/blender/pulls/123741
