This matches behavior of Multiscatter GGX and could become handy later on
when/if we decide it would be beneficial to replace on closure with another.
Reviewers: lukasstockner97, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2413
There was 16 bits reserved for primitive type, while we only need 4.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2401
Discard the whole volume stack on the last bounce (but keep
world volume if present).
Volumes are expected to be closed manifol meshes, meaning if
ray entered the volume there should be an intersection event
of ray exisintg the volume. Case when ray hit nothing and
there are still non-world volumes in the stack can happen in
either of cases.
1. Mesh is not closed manifold.
Such configurations are not really supported anyway and should
not be used.
Previous code would have consider the infinite length of the
ray to sample across, so render result wasn't really correct
anyway.
2. Exit intersection is more far away than the camera far
clip distance.
This case also will behave differently now, but previously it
wasn't really correct either, so it's not like we're breaking
something which was working as expected.
3. We missed exit event due to intersection precision issues.
This is exact the case which this patch fixes and avoid
fireflies.
4. Volume has Camera only visibility (all the rest visibility
is set to off)
This is what could be considered a regression but could be
solved quite easily by checking volume stack's objects flags
and keep entries which doesn't have Volume Scatter visibility
(or even better: ensure Volume Scatter visibility for objects
with volume closure),
Fixes T46108: Cycles - Overlapping emissive volumes generates unexpected bright hotspots around the intersection
Also fixes fireflies appearing on the edges of cube with
emissive volue.
Reviewers: juicyfruit, brecht
Reviewed By: brecht
Maniphest Tasks: T46108
Differential Revision: https://developer.blender.org/D2212
There were two cases where correlation issues were obvious:
- File from T38710 was giving issues in 2.78a again
- File from T50116 was having totally different shadow between
sample 1 and sample 32.
Use some more simplified version of CMJ hash which seems to give
nice randomized value which solves the correlation.
This commit will break all unit test files, but it's a bug fix
so perhaps OK to commit this.
This also fixes T41143: Sobol gives nonuniform noise
Proper science paper about hash function is coming.
Reviewers: brecht
Reviewed By: brecht
Subscribers: lukasstockner97
Differential Revision: https://developer.blender.org/D2385
Was giving huge artifacts in the barber shop file here in the studio,
Maybe not fully optimal solution, but committing it for now to have
closer look later.
`kernel_path.h` and `kernel_path_branched.h` have a lot of conditional code and
it was kind of hard to tell what code belonged to which directive. Should be
easier to read now.
Basically, the problem here was that the transform that's used to bring texture coordinates
to world space is either fetched while setting up the shader (with Object Motion is enabled) or
fetched when needed (otherwise). That helps to save ShaderData memory on OpenCL when Object Motion isn't needed.
Now, if OM is enabled, the Lamp transform can just be stored inside the ShaderData as well. The original commit just assumed it is.
However, when it's not (on OpenCL by default, for example), there is no easy way to fetch it when needed, since the ShaderData doesn't
store the Lamp index.
So, for now the lamps just don't support local texture coordinates anymore when Object Motion is disabled.
To fix and support this properly, one of the following could be done:
- Just always pre-fetch the transform. Downside: Memory Usage increases when not using OM on OpenCL
- Add a variable to ShaderData that stores the Lamp ID to allow fetching it when needed
- Store the Lamp ID inside prim or object. Problem: Cycles currently checks these for whether an object was hit - these checks would need to be changed.
- Enable OM whenever a Texture Coordinate's Normal output is used. Downside: Might not actually be needed.
This allows to save a memory copy, which will be particularly useful for network rendering.
Reviewers: sergey, brecht, dingto, juicyfruit, maiself
Differential Revision: https://developer.blender.org/D2323
In scenes with many lights, some of them might have a very small contribution to some pixels, but the shadow rays are traced anyways.
To avoid that, this patch adds probabilistic termination to light samples - if the contribution before checking for shadowing is below a user-defined threshold, the sample will be discarded with probability (1 - (contribution / threshold)) and otherwise kept, but weighted more to remain unbiased.
This is the same approach that's also used in path termination based on length.
Note that the rendering remains unbiased with this option, it just adds a bit of noise - but if the setting is used moderately, the speedup gained easily outweighs the additional noise.
Reviewers: #cycles
Subscribers: sergey, brecht
Differential Revision: https://developer.blender.org/D2217
This option allows to create a smoother transition between Bricks and Mortar - 0 applies no smoothing, and 1 smooths across the whole mortar width.
Mainly useful for displacement textures.
The new default value for the smoothing option is 0.1 to give some smoothing that helps with antialiasing, but existing nodes are loaded with smoothing 0 to preserve compatibility.
Reviewers: sergey, dingto, juicyfruit, brecht
Reviewed By: brecht
Subscribers: Blendify, nutel
Differential Revision: https://developer.blender.org/D2230
When using the Normal output of the Texture Coordinate node on Point and Spot lamps, the coordinates now depend on the rotation of the lamp.
On Area lamps, the Parametric output of the Geometry node now returns UV coordinates on the area lamp.
Credit for the Area lamp part goes to Stefan Werner (from D1995).
Basically don't use rcp() in areas which seems to be critical after
second look. Also disabled some multiplication operators, not sure
yet why they might be a problem.
Tomorrow will be setting up a full test with all cases which were
buggy in our farm to see if this fix is complete.
Several ideas here:
- Optimize calculation of near_{x,y,z} in a way that does not require
3 if() statements per update, which avoids negative effect of wrong
branch prediction.
- Optimization of direction clamping for BVH.
- Optimization of point/direction transform.
Brings ~1.5% speedup again depending on a scene (unfortunately, this
speedup can't be sum across all previous commits because speedup of
each of the changes varies from scene to scene, but it still seems to
be nice solid speedup of few percent on Linux and bigger speedup was
reported on Windows).
Once again ,thanks Maxym for inspiration!
Still TODO: We have multiple places where we need to calculate near
x,y,z indices in BVH, for now it's only done for main BVH traversal.
Will try to move this calculation to an utility function and see if
that can be easily re-used across all the BVH flavors.
Similar to the previous commit, avoid negative effect of bad branch prediction.
Gives measurable performance up to ~2% in tests here.
Once again, thanks to Maxym Dmytrychenko!
Similar to regular triangle intersection case. Gives about 3% speedup rendering
SSS object on my desktop,
Question: how to avoid such a code duplication in a nice way without speed loss?
Note that volume rendering is not supported yet, this is a step towards that.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2299
This commit basically vectorizes existing code using AVX2 instructions
(without modifying algorithm itself). This gives quite nice speedups:
BMW: -8%
Classroom: -5%
Cat: -5%
Koro: +1%
Barcelona: -8%
That's on Linux machine, reported performance improvement on Windows
goes up to 20%.
Not currently sure why Koro is somewhat slower because it mainly uses
curve intersection tests, could be a time noise? Or osmething with the
cache utilization perhaps? In any case speedup in other scenes makes
me thinking that current state is acceptable for initial implementation.
This is again inspired by Maxym Dmytrychenko.
Based on existing ssef data type and to my knowledge it's also what happens in
Embree nowadays.
Inspired by Maxym Dmytrychenko and required for the upcoming triangle
intersection commit.
Hopefully the copyright message is correct.
When ray hits curve segment with SSS shader it was possible to have
uninitialized hit_P variable used for sampling.
Seems that was a reason of our headache of difference between AVX2
and SSE4 render results here, so now we can revert all the nasty
ifdef-ed inline policies.
