The (tracking) camera presets have not been updated in the last 7 or
more years, so they are very outdated. I found it pointless to have a
few specific camera models in the list and instead add the most commonly
used sensor sizes/film sizes. This way the list is shorter, easier to
maintain/becomes later outdated, and is more user friendly for most people
who don't own any of the specific cameras. I added the Crop Factor to the
Beginning of the name, so it gets sortet in the correct order and presets
are easier to find based on the size.
Reviewed By: #render_cycles, #motion_tracking, brecht, sergey
Differential Revision: https://developer.blender.org/D10739
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
This commit adds a node that outputs the total length of all
evalauted curve splines in a geometry set as a float value.
Differential Revision: https://developer.blender.org/D11459
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
This operator is needed in some cases to update image preview.
In workspaces with smaller timelines this is limiting, because users
need to first check that mouse cursor is in correct place, then press
CTRL+R shortcut.
EEVEE uses hashing to sync aov names and types with the gpu. For the type a hashed value was overridden making `decalA` and `decalB` choose the same hash. This patches fixes this by removing the most significant bit.
Sometimes is required to reset the thickness or the opacity of the strokes. Actually this was done using a modifier, but this operators solves this.
Reviewed By: mendio, filedescriptor
Maniphest Tasks: T87427
Differential Revision: https://developer.blender.org/D11453
Use the D-key to access the view menu instead of the Tilda key,
which isn't accessible on some international layouts.
To resolve the conflicts the following changes have been made.
- `D` (motion) opens the view menu.
- `D` (mouse-button) uses grease-pencil (as it does currently).
- `Tilda` is used to for "Object Mode Transfer" instead of the View menu.
See T88092 for details.
Reviewed By: Severin
Ref D11189
This node is similar to the mask modifier, but it deletes the elements
of the geometry corresponding to the selection, which is retrieved as
a boolean attribute. The node currently supports both mesh and point
cloud data. For meshes, which elements are deleted depends on the
domain of the input selection attribute, just like how behavior depends
on the selection mode in mesh edit mode.
In the future this node will support curve data, and ideally volume
data in some way.
Differential Revision: https://developer.blender.org/D10748
This patch adds the base code needed to make the full-frame system work for both current tiled/per-pixel implementation of operations and full-frame.
Two execution models:
- Tiled: Current implementation. Renders execution groups in tiles from outputs to input. Not all operations are buffered. Runs the tiled/per-pixel implementation.
- FullFrame: All operations are buffered. Fully renders operations from inputs to outputs. Runs full-frame implementation of operations if available otherwise the current tiled/per-pixel. Creates output buffers on first read and free them as soon as all its readers have finished, reducing peak memory usage of complex/long trees. Operations are multi-threaded but do not run in parallel as Tiled (will be done in another patch).
This should allow us to convert operations to full-frame in small steps with the system already working and solve the problem of high memory usage.
FullFrame breaking changes respect Tiled system, mainly:
- Translate, Rotate, Scale, and Transform take effect immediately instead of next buffered operation.
- Any sampling is always done over inputs instead of last buffered operation.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11113
Now FPS is displayed in the video source for videos to provide easy
access.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11441
The same code existed in 2.82 and earlier so this should be safe. Removing the
custom implementation of shutil.copytree in f34d5d9 did not correctly add back
the option to copy symlinks.
This node creates poly curve splines from mesh edges. A selection
attribute input allows only using some of the edges from the mesh.
The node builds cyclic splines from branchless groups of edges where
possible, but when there is a three-way intersection, the spline stops.
The node also transfers all attributes from the mesh to the resulting
control points. In the future we could add a way to limit that to a
subset of the attributes to improve performance.
The algorithm is from Animation Nodes, written by @OmarSquircleArt.
I added the ability to use a selection, attribute transferring, and
used different variable names, etc, but other than that the algorithm
is the same.
Differential Revision: https://developer.blender.org/D11265
Added missing topbar in VSE.
Also added the Stabilizer options to Topbar for all modes.
Reviewed By: mendio, pepeland
Maniphest Tasks: T86465
Differential Revision: https://developer.blender.org/D11347
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
This operator is a common request of animators to convert the transformation (inluding modifiers) of one grease pencil object, into a new object, generating strokes.
Reviewed By: pepeland
Maniphest Tasks: T87424
Differential Revision: https://developer.blender.org/D11014
Accessing data through RNA should never implicitely create it. Objects'
and particles' forcefields and collision settings were doing this.
Note that UI code also had to be tweaked to properly handle `None`
(NULL) cases.
Differential Revision: https://developer.blender.org/D11341
This node can change all faces that use a specific material to use a
different material. Using this node is significantly more efficient
than creating a selection from all faces with a specific material
index and then using the Material Assign node.
Ref T88055.
Differential Revision: https://developer.blender.org/D11325
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
Use bone rotation order to compute the baked rotation. This fixes a bug
introduced in rB0e85d701c654, where the object rotation order was
applied to the bone.
Maniphest Tasks: T88359, T86193
Reviewed By: sybren, GuiltyGhost, #animation_rigging
Differential Revision: https://developer.blender.org/D11282
This node is similar to the Value and Vector node.
It just provides a way to use the same material in multiple nodes
without exposing it outside of a node group.
Differential Revision: https://developer.blender.org/D11305
This adds a new Material Assign node. It can be used to change the
material used by an existing mesh or to assign a material to a mesh
that has been generated from scratch.
Differential Revision: https://developer.blender.org/D11155
- Used try/except instead of a poll function.
- The error case referenced a non-existent error handling module.
Prefer poll functions over exception handling where possible,
also having an operators logic in a try block isn't good practice
as it can hide more serious errors in the code.
Note that duplicate pencil settings access should be moved into a
utility function. This can be part of a separate cleanup.
Collada shaders with black <specular> should import with Specular=0.
(A missing <specular> is the same as black.)
The general specular conversion is hard, but this case is common and easy.
Fixes the specular for all <constant>/<lambert> shaders, and <blinn>/<phong>
shaders with black/omitted <specular>. Before this they all looked too "shiny".
Reviewed By: gaiaclary
Differential Revision: https://developer.blender.org/D10939
