CTRL+C/V (or Apple+C/V) on buttons didn't copy/paste names for buttons
of type "ID pointer" anymore. Was caused by NULL pointer check in wrong
location.
Textbutton: SHIFT+Arrow selections did not work proper when the amount of
text in a button was more than its width could display. Now still doesn't
work OK 100% (when selection itself goes outside of button view).
Also: removed the very bad SELWIDTH define (but->selend - but->selsta).
That's not making readable code!
Reason: I had to make the "BUT" type in Blender to use callbacks *after* the
uiBlock was freed, because in Blender several of these callbacks invoke
drawing, which isn't possible while a block is being evaluated.
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
Full log:
http://www.blender3d.org/cms/Render_Passes.829.0.html
In short:
- Passes now have option to be excluded from "Combined".
- RenderLayers allow to override Light (Lamp groups) or Material.
- RenderLayers and Passes are in Outliner now, (ab)using Matt's nice
'restriction collumns'. :)
Based on patch #5140 by Juho Vepsäläinen, this commit removes the requirement to type # at the start when you want to use Python expression evaluation when typing a value in a button.
In a nutshell, that means you can now type 3 + 5 in a numbut and see it change to 8.
Word of warning: The normal Python operator logic applies, so if you type in 1 / 3, you'll get 0 and not 0.333. There's no going around that.
- Now baking itself is threaded too (like for render, max 2 cpus. Moving
this to 4 cpus is on todo. Goes twice as fast!
- fix: ESC from bake was broken...
- other fix: toolbox menus didn't treat sublevel string lengths OK,
truncating items like for Group library names.
- When using (referenced) Library files, the groups in Add menu now are
listed per used file. This allows to easier create custom datasets.
- Toolbox opens in collums now, when more than 30 items in a menu exist
THE OBJECT PROXY
Or simple said; local control of referenced data from libraries.
Having library files with references is a very common studio setup, and
Blender did do quite well in that area. Were it not that for character
setups it was impossible to use still.
This commit will enable a full rig+character to remain in the library,
and still have - under strict control - local access for animation edits.
Full log:
http://www.blender3d.org/cms/Proxy_Objects.824.0.html
- pending commit for OSX intel systems, with intel graphics. These now call
an extra swapbuffers after glFlush(). Code is ifdeffed, and doesnt affect
other systems.
- show-off commit: option to have transparent nodes over the composite
result. Only draws Image for active Viewer Node now, and image doesnt
translate nor zoom (which isnt bad though).
Set in themes the alpha color of "node backdrop" to make nodes
transparent.
Apparently not supported in Windows compiler, and although it has _isnan()
I've got no time to code wrappers for it, and #ifdefs here is plain bad
code.
Nice todo for Campbell one of these days after release!
Using TAB to type values in button sequences, didn't execute button
callbacks on the 2nd and and 3rd etc. Error could be noticed in the
Node Editor, Mapping node. That one didn't pass on changes to shading code.
Ancient issue in making screendumps in Blender. It used to support making
dumps of popup menus, but that disappeared a while ago. However, when you
press CTRL+F3 in a menu now, Blender hangs in some eternal loop in ghost.
This commit fixes making menu screendumps (nice for docs!).
- press CTRL+F3 *twice* for an exact copy of a menu. (first press exits
menu, 2nd press opens filewindow)
- note, it is ALT+CTRL+F3 in OSX
- what is saved is only the topmost open level of a menu
- full-screen dumps work too by holding SHIFT extra.
Fix for old (post 2.3) annoyance in UI; on redraw of the entire buttons
window, the active button (with highlight) was detected wrong. Was just
a matrix calculation on wrong moment. :)
Also: fixed tooltip for transparent material "add" option. It was talking
about "Glow", a confusing description.
Users can write any valid Python expression (that evals to an int or float) inside Blender's gui number buttons (preceded by #) and have them evaluated to their actual int or float value.
Button Evaluation has access to the same modules as PyDrivers.
For example:
#1.0*9-2.3
#ob("Camera").LocZ
#1.0/ob("Cube").LocX
#math.sin(math.pi) -- or simply #m.sin(m.pi)
etc
you can click on the 'Sample' button, to sample any colour on the Blender
screen. This is really useful in the compositor, and would probably be good for
sampling footage in any eventual chroma key nodes that may be made, too.
LMB to pick the colour, ESC or RMB to cancel.
Hotkeys Ctrl/Command (Mac) X, C, and V will cut, copy and paste the selected
text to and from the 'buttons clipboard'.
This clipboard is still not that good since it doesn't even use the same
storage as the blender text editor, let alone the host OS. But I guess that
sort of thing should be tackled inside of GHOST. Any takers? :)
Note : this part of code was quite a mess with things called twice when
not needed, tests for not updating when we want to, and hsv sliders not
handled properly.
I tried to figure what was useful and what was not but cannot garantee i
spotted everything or even fixed it the most proper way, the event callback
nesting making hard to figure what really happen.
However it does work again now
- Texture Node
Allows to use any Blender Texture block as input for masks or color
blending. The texture node doesn't generate a real image, but adjusts to
the size as mapped with during an operation. So it won't work to use it
as Image input for Blur or Filter nodes.
Note; the Vector inputs for this node only work with manual input now!
- Translation Node
Give any image an offset in X or Y direction
For the Texture node to work, I needed to move the central 'pixel
processor' up one level... to allow differently sized images to merge
and allow 'procedural images' without size.
Temporal image of the day: http://www.blender.org/bf/rt.jpg
(NOTE: new include dependency in Render module, might need MSVC update!
It has to include the imbuf/intern/openexr/ directory in search path)
-> New Composite node: "Hue Saturation".
Works like the former 'post process' menu. There's no gamma, brightness or
multiply needed in this node, for that the Curves Node functions better.
-> Enabled Toolbox in Node editor
This now also replaces the SHIFT+A for adding nodes. The nodes are
automatically added to the menus, using the 'class' category from the
type definition.
Current classes are (compositor examples):
Inputs: RenderResult, Image
Outputs: Composite, Viewer
Color Ops: RGB Curves, Mix, Hue Saturation, AlphaOver
Vector Ops: Normal, Vector Curves, Map Value
Filters: Filter, Blur, VectorBlur
Convertors: ColorRamp, RGBtoBW, Separate RGBA, Separate HSVA, Set Alpha
Generators: RGB, Value, Time
Groups: the list of custom defined nodes
-> OpenEXR tile saving support
Created an API for for saving tile-based Images with an unlimited amount
of layers/channels. I've tested it for 'render result' now, with the idea
that this can (optionally) replace the current inserting of tiles in the
main result buffers. Especially with a lot of layers, the used memory for
these buffers can easily go into the 100s of megs.
Two other advantages:
- all 'render result' layers can be saved entirely in a single file, for
later use in compositing, also for animation output.
- on each render, per scene, a unique temp file can be stored, allowing
to re-use these temp files on starting Blender or loading files, showing
the last result of a render command.
The option is currently disabled, needs more work... but I had to commit
this because of the rest of the work I did!
-> Bug fix
The Image node didn't call an execute event when browsing another image.
- Scene support in RenderLayers
You now can indicate in Compositor to use RenderLayer(s) from other scenes.
Use the new dropdown menu in the "Render Result" node. It will change the
title of the node to indicate that.
The other Scenes are rendered fully separate, creating own databases (and
octrees) after the current scene was finished. They use their own render
settings, with as exception the render output size (and optional border).
This makes the option an interesting memory saver and speedup.
Also note that the render-results of other scenes are kept in memory while
you work. So, after a render, you can tweak all composit effects.
- Render Stats
Added an 'info string' to stats, printed in renderwindow header. It gives
info now on steps "creating database", "shadow buffers", and "octree".
- Bug fixes
Added redraw event for Image window, when using compositor render.
Text objects were not rendered using background render (probably a bug
since depsgraph was added)
Dropdown buttons in Node editor were not refreshed after usage
Sometimes render window did not open, this due to wrong check for 'esc'.
Removed option that renders view-layers on F12, with mouse in 3d window.
Not only was it confusing, it's now more efficient with the Preview Panel,
which does this nicely.
Here are my notes on things to look out for as potential problem
spots:
source/blender/blenkernel/intern/displist.c:
+ is initfastshade(void) supposed to be empty? I had
to make it empty to get the merged tree to compile.
source/blender/python/api2_2x/Armature.c:
+ went with the version that had Armature_getLayers()
source/blender/python/api2_2x/Object.c
+ went with the version of Object_getPose() from bf-blender.
(#ifdef 0-ed the other version)
source/blender/python/api2_2x/Pose.[ch]
+ had problems linking due to no Pose_Init() ... copied these
two files straight from bf-blender.
source/blender/src/drawview.c:
+ view3d_panel_properties() had things shifted a few things shifted
a few pixels, otherwise, things were painless
source/blender/src/splash.jpg.c:
+ went with bf-blender version (orange is dead)
source/gameengine:
+ went with bf-blender version -- does not compile due to IMB_rect* stuff,
Ton should look into this.
The further you drag the bigger the number gets (like gimp/photoshop brush size slider)
Works for ranges: float buttons bigger then 11 and int buttons bigger then 129.
A full detailed description of this will be done later... is several days
of work. Here's a summary:
Render:
- Full cleanup of render code, removing *all* globals and bad level calls
all over blender. Render module is now not called abusive anymore
- API-fied calls to rendering
- Full recode of internal render pipeline. Is now rendering tiles by
default, prepared for much smarter 'bucket' render later.
- Each thread now can render a full part
- Renders were tested with 4 threads, goes fine, apart from some lookup
tables in softshadow and AO still
- Rendering is prepared to do multiple layers and passes
- No single 32 bits trick in render code anymore, all 100% floats now.
Writing images/movies
- moved writing images to blender kernel (bye bye 'schrijfplaatje'!)
- made a new Movie handle system, also in kernel. This will enable much
easier use of movies in Blender
PreviewRender:
- Using new render API, previewrender (in buttons) now uses regular render
code to generate images.
- new datafile 'preview.blend.c' has the preview scenes in it
- previews get rendered in exact displayed size (1 pixel = 1 pixel)
3D Preview render
- new; press Pkey in 3d window, for a panel that continuously renders
(pkey is for games, i know... but we dont do that in orange now!)
- this render works nearly identical to buttons-preview render, so it stops
rendering on any event (mouse, keyboard, etc)
- on moving/scaling the panel, the render code doesn't recreate all geometry
- same for shifting/panning view
- all other operations (now) regenerate the full render database still.
- this is WIP... but big fun, especially for simple scenes!
Compositor
- Using same node system as now in use for shaders, you can composit images
- works pretty straightforward... needs much more options/tools and integration
with rendering still
- is not threaded yet, nor is so smart to only recalculate changes... will be
done soon!
- the "Render Result" node will get all layers/passes as output sockets
- The "Output" node renders to a builtin image, which you can view in the Image
window. (yes, output nodes to render-result, and to files, is on the list!)
The Bad News
- "Unified Render" is removed. It might come back in some stage, but this
system should be built from scratch. I can't really understand this code...
I expect it is not much needed, especially with advanced layer/passes
control
- Panorama render, Field render, Motion blur, is not coded yet... (I had to
recode every single feature in render, so...!)
- Lens Flare is also not back... needs total revision, might become composit
effect though (using zbuffer for visibility)
- Part render is gone! (well, thats obvious, its default now).
- The render window is only restored with limited functionality... I am going
to check first the option to render to a Image window, so Blender can become
a true single-window application. :)
For example, the 'Spare render buffer' (jkey) doesnt work.
- Render with border, now default creates a smaller image
- No zbuffers are written yet... on the todo!
- Scons files and MSVC will need work to get compiling again
OK... thats what I can quickly recall. Now go compiling!
- EXR now saves and reads Zbuffers correctly
- EXR reading didn't set alpha to 1 yet when no alpha buffer was present
- ImageWindow: the "black point" only checked for the r value... now is OK
- ImageWindow: Curves panal has button "reset"
- ImageWindow: hold LMB drag shows rgba and z values. With SHIFT or CTRL it
applies black/white point whilte dragging too
- ImageWindow: saving file copied the entire buffer... removed that. Also
made the header print clear; this save only saves in own file type.
- Curves: zoom and drag now gets clamped by the Clipping value
- Imbuf: duplicate buffer only copied one quarter of to new buffer
After this click on the object name and start typing, even though the selection makes it that the new string would be overwritten, it dosent let you type in any text.
from
if(len <= but->max) {
to...
if(len-SELWIDTH+1 <= but->max) {
- Tested and works well.
- New UI element: the "Curve Button".
For mapping ranges (like 0 - 1) to another range, the curve button can be
used for proportional falloff, bone influences, painting density, etc.
Most evident use is of course to map RGB color with curves.
To be able to use it, you have to allocate a CurveMapping struct and pass
this on to the button. The CurveMapping API is in the new C file
blenkernel/intern/colortools.c
It's as simple as calling:
curvemap= curvemapping_add(3, 0, 0, 1, 1)
Which will create 3 curves, and sets a default 0-1 range. The current code
only supports up to 4 curves maximum per mapping struct.
The CurveMap button in Blender than handles allmost all editing.
Evaluating a single channel:
float newvalue= curvemapping_evaluateF(curvemap, 0, oldval);
Where the second argument is the channel index, here 0-1-2 are possible.
Or mapping a vector:
curvemapping_evaluate3F(curvemap, newvec, oldvec);
Optimized versions for byte or short mapping is possible too, not done yet.
In butspace.c I've added a template wrapper for buttons around the curve, to
reveil settings or show tools; check this screenie:
http://www.blender.org/bf/curves.jpg
- Buttons R, G, B: select channel
- icons + and -: zoom in, out
- icon 'wrench': menu with tools, like clear curve, set handle type
- icon 'clipping': menu with clip values, and to dis/enable clipping
- icon 'x': delete selection
In the curve button itself, only LMB clicks are handled (like all UI elements
in Blender).
- click on point: select
- shift+click on point: swap select
- click on point + drag: select point (if not selected) and move it
- click outside point + drag: translate view
- CTRL+click: add new point
- hold SHIFT while dragging to snap to grid
(Yes I know... either one of these can be Blender compliant, not both!)
- if you drag a point exactly on top of another, it merges them
Other fixes:
- Icons now draw using "Safe RasterPos", so they align with pixel boundary.
the old code made ints from the raster pos coordinate, which doesn't work
well for zoom in/out situations
- bug in Node editing: buttons could not get freed, causing in memory error
prints at end of a Blender session. That one was a very simple, but nasty
error causing me all evening last night to find!
(Hint; check diff of editnode.c, where uiDoButtons is called)
Last note: this adds 3 new files in our tree, I did scons, but not MSVC!
- New Node: "Mapping". Allows input vector to be translated, rotated and
scaled. And optional be clipped to a range. Works for colors too!
- The button "Normal" now allows incremental input, so a click in the
button won't change the normal anymore
- Connecting wires now show selection state for Nodes, with nice blended
colors. Both colors were added in Themes, but default to black and white
- Found the potential crasher for sound playback & undo. Test!
- PoseMode: NKey panel didn't work when actions where assigned
- NLA: "Add action strip" now displays in menu to which active object the
actions are added.
Material Nodes now have input sockets, to override the actual Material
settings. If socket has no input, you can also edit Material settings here.
(Color picker, number slider).
Of course a load of options will become available here, first bugfixing!
(Oh, and enable fix thread render)
- Texture Node: now displays 'intensity values' in node too, and has input,
and shows in buttons when activated in Node editor. (no browsing buttons
yet...)
- New: "Normal Node". This uses a new UI button, which allows to quickly
input a normal vector, based on spherical coordinates.
The Normal Node has optional vector input, and delivers a dot product
then. This can be used as a blending factor between nodes, or for fake
extra light in a certain direction.
- New: "Geometry Node". This actually replaces the Input node. It offers
all coordinates (vectors) as being the starting point for shading and
for textures. Note: for preview render this doesn't give much different
results yet... this is the start for real render support!
- http://www.blender.org/bf/rt5.jpg
The two new nodes in action
- Bugfix: the "Block" button (which delivers popups) did not return a
correct event when nothing happened (mouse moved out), which could
cause mouse clicks to be passed on to the queue.
