The sky will appear brighter than before by default. To compensate for this,
lower exposure in the Film panel. The default altitude was also changed from
90 to 15 degrees.
Patch contributed by Marco with the help of Ryan Jones.
Differential Revision: https://developer.blender.org/D8285
For animation/driver purposes, being able to go outside of the 0-360
range makes things easier.
Differential Revision: https://developer.blender.org/D8091
I'm not sure if the Sky was deliberately left out or was just waiting for a
better moment, but so many I was disappointed that Sky in EEVEE is
completely white.
There are already 2 implementations (osl and gpu) so this is the third one.
Looking at other cases it seems that we are not supposed to share sources
between cycles and the rest? So the new util_sky_model files are just
copies of what is already in cycles, except that the data file uses the RGB
variant of the Hosek/Wilkie model, because we output RGB anyway (but can be
easily changed to XYZ if desired - the results are nearly identical).
I am not sure if it is okay to pass 3*9 float values as 3 mat4 uniforms (I
wanted to use mat3 but it does not work).
Also, should I cache the sky model data between renders if the parameters
do not change?
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D7108
Don't apply the matrix transform optimization in this case, curve points and
radius can't represent non-uniform scale the way is possible with triangle
meshes and vertices.
This would cause abrupt change if objects had e.g. motion blur in one frame
and not in the next.
Compared to Optix denoise, this is usually slower since there is no GPU
acceleration. Some optimizations may still be possible, in avoid copies
to the GPU and/or denoising less often.
The main thing is that this adds viewport denoising support for computers
without an NVIDIA GPU (as long as the CPU supports SSE 4.1, which is nearly
all of them).
Ref T76259
Enabling render and viewport denoising is now both done from the render
properties. View layers still can individually be enabled/disabled for
denoising and have their own denoising parameters.
Note that the denoising engine also affects how denoising data passes are
output even if no denoising happens on the render itself, to make the passes
compatible with the engine.
This includes internal refactoring for how denoising parameters are passed
along, trying to avoid code duplication and unclear naming.
Ref T76259
Also removing the curve system manager which only stored a few curve intersection
settings. These are all changes towards making shape and subdivision settings
per-object instead of per-scene, but there is more work to do here.
Ref T73778
Depends on D8013
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8014
This keeps render results compatible for combined CPU + GPU rendering.
Peformance and quality primitives is quite different than before. There
are now two options:
* Rounded Ribbon: render hair as flat ribbon with (fake) rounded normals, for
fast rendering. Hair curves are subdivided with a fixed number of user
specified subdivisions.
This gives relatively good results, especially when used with the Principled
Hair BSDF and hair viewed from a typical distance. There are artifacts when
viewed closed up, though this was also the case with all previous primitives
(but different ones).
* 3D Curve: render hair as 3D curve, for accurate results when viewing hair
close up. This automatically subdivides the curve until it is smooth.
This gives higher quality than any of the previous primitives, but does come
at a performance cost and is somewhat slower than our previous Thick curves.
The main problem here is performance. For CPU and OpenCL rendering performance
seems usually quite close or better for similar quality results.
However for CUDA and Optix, performance of 3D curve intersection is problematic,
with e.g. 1.45x longer render time in Koro (though there is no equivalent quality
and rounded ribbons seem fine for that scene). Any help or ideas to optimize this
are welcome.
Ref T73778
Depends on D8012
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8013
The kernel did not work correctly when these were disabled anyway. The
optimized BVH traversal for the no instances case was also only used on
the CPU, so no longer makes sense to keep.
Ref T73778
Depends on D8010
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8011
The hair BSDFs are already designed to assume this, and disabling backface
culling would break them in some cases.
Ref T73778
Depends on D8009
Maniphest Tasks: T73778
Differential Revision: https://developer.blender.org/D8010
Triangles were very memory intensive. The only reason they were not removed yet
is that they gave more accurate results, but there will be an accurate 3D curve
primitive added for this.
Line rendering was always poor quality since the ends do not match up. To keep CPU
and GPU compatibility we just remove them entirely. They could be brought back if
an Embree compatible implementation is added, but it's not clear to me that there
is a use case for these that we'd consider important.
Ref T73778
Reviewers: #cycles
Subscribers:
This commit adds a new model to the Sky Texture node, which is based on a
method by Nishita et al. and works by basically simulating volumetric
scattering in the atmosphere.
By making some approximations (such as only considering single scattering),
we get a fairly simple and fast simulation code that takes into account
Rayleigh and Mie scattering as well as Ozone absorption.
This code is used to precompute a 512x128 texture which is then looked up
during render time, and is fast enough to allow real-time tweaking in the
viewport.
Due to the nature of the simulation, it exposes several parameters that
allow for lots of flexibility in choosing the look and matching real-world
conditions (such as Air/Dust/Ozone density and altitude).
Additionally, the same volumetric approach can be used to compute absorption
of the direct sunlight, so the model also supports adding direct sunlight.
This makes it significantly easier to set up Sun+Sky illumination where
the direction, intensity and color of the sun actually matches the sky.
In order to support properly sampling the direct sun component, the commit
also adds logic for sampling a specific area to the kernel light sampling
code. This is combined with portal and background map sampling using MIS.
This sampling logic works for the common case of having one Sky texture
going into the Background shader, but if a custom input to the Vector
node is used or if there are multiple Sky textures, it falls back to using
only background map sampling (while automatically setting the resolution to
4096x2048 if auto resolution is used).
More infos and preview can be found here:
https://docs.google.com/document/d/1gQta0ygFWXTrl5Pmvl_nZRgUw0mWg0FJeRuNKS36m08/view
Underlying model, implementation and documentation by Marco (@nacioss).
Improvements, cleanup and sun sampling by @lukasstockner.
Differential Revision: https://developer.blender.org/D7896
This patch makes the infamous "Cancel" error in the viewport a thing of the past. Instead it
now shows a more useful error message and streamlines the error handling process in CUDA.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8008
With this patch Cycles recognizing when a logical OptiX and CUDA device represent the same
physical GPU and attempts to eliminate unnecessary tile copies for viewport rendering if that
is the case for all active devices. In addition, denoising is now no longer performed on the first
available OptiX device only, but instead it will try to match CUDA and OptiX
rendering/denoising devices exactly to maximize utilization.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7975
This reverts commit 33ce0cb5a1.
Fix T77273: crash enabling portal lights. The optimization for background
updates can be added back later for 2.90 and 2.83.1.
A new user parameter can be used to shift the shadow terminator
towards the light source. With it, one can hide some of the
artifacts that appear on coarse meshes with smooth shading.
Note that this technique is not engery conserving.
This is based on the work by the Appleseed renderer team.
Differential Revision: https://developer.blender.org/D7634
There should be no user visible change from this, except that tile size
now affects performance. The goal here is to simplify bake denoising in
D3099, letting it reuse more denoising tiles and pass code.
A lot of code is now shared with regular rendering, with the two main
differences being that we read some render result passes from the bake API
when starting to render a tile, and call the bake kernel instead of the
path trace kernel.
With this kind of design where Cycles asks for tiles from the bake API,
it should eventually be easier to reduce memory usage, show tiles as
they are baked, or bake multiple passes at once, though there's still
quite some work needed for that.
Reviewers: #cycles
Subscribers: monio, wmatyjewicz, lukasstockner97, michaelknubben
Differential Revision: https://developer.blender.org/D3108
Since the sampling and evaluation functions handle both cases anyways,
there's not really a point for keeping the distinction in the kernel,
so we might as well cut down the number of CLOSURE_BSDF_MICROFACETs a bit.
Differential Revision: https://developer.blender.org/D7736
Remove old code that added extra updates for shaders that have a dependency on
objects. The dependency graph can now tell Cycles when a material is affected by
an object transform.
Currently in fractal_noise functions, each subsequent octave doubles the
frequency and reduces the amplitude by half. This patch introduces Roughness
input to Noise and Wave nodes. This multiplier determines how quickly the
amplitudes of the subsequent octaves decrease.
Value of 0.5 will be the default, generating identical noise we had before.
Values above 0.5 will increase influence of each octave resulting in more
"rough" noise, most interesting pattern changes happen there. Values below
0.5 will result in more "smooth" noise.
Differential Revision: https://developer.blender.org/D7065
