Find free slot first for sound strips then for movie strips.
This patch also fixes issue where all strips were added to channel 2 by default.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8339
This is the first step for having sequences covered with session UUID
with the goal to remove code which uses original sequence pointer to
match sequences.
Currently this UUID is maintained on file load, allocation and leaf
duplication function.There are more cases to cover and ensure UUID
is re-generated or re-used when needed. It will be done as follow-up
development.
Operator logic is limited to iterating over selection and executing
same code as python API does.
Functional changes:
- No attempt to preserve effects is made. Dependant effects are deleted.
- No attempt to change meta strip boundaries.
Partially fixes T73828
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6892
Add recursion check before assigning strip as a mask for modifier.
Same check is used for recursion check when reassigning effect input, so it
should not be possible to create recursion at all.
Sequencer was not initialized yet, and RNA update function tried to clean up cache.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8323
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
This happened because of typo in seq_dupli() when duplicating effect data.
Instead of duplicating data to new sequence, it was duplicated into original.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8295
It was already possible to create Sound and Image strips that reference
non-existing files. Now it's also possible to create Movie strips
referencing missing files via the Python API call
`Sequences.new_movie()`. In this case, the duration of the strip will be
set to 1 frame.
Note that this commit does not change anything in the user interface.
The Python API of the `MovieStrip` class is extended with a function
`reload_if_needed()`. This function only performs disk I/O if the movie
strip cannot produce frames, that is either when its filepath points to
a non-existing file, or when the video sequence editor has not been
shown yet (for example because it is in an inactive workspace).
This allows for the following:
```
import bpy
scene = bpy.context.scene
vse = scene.sequence_editor_create()
filepath = bpy.path.abspath('//demo.mkv')
strip = vse.sequences.new_movie("movie", filepath,
channel=2,
frame_start=47,
file_must_exist=False)
strip.frame_final_end = 327
```
This will create a new movie strip, even when `demo.mkv` does not exist.
Once `demo.mkv` has appeared at the expected location, either
`strip.reload_if_needed()` or `strip.filepath = strip.filepath` will
load it.
Differential Revision: https://developer.blender.org/D8257
Reviewed By: Sergey, ISS
Make sure that proxy and original images are scaled to same size before
applying offset or crop.
During testing, I discovered, that raw cache will lose information whether
this image was proxy or not. Because of this, proxy images will not create
this cache type. It would be fairly easy to implement this functionality for
cache, but I have decided to not do it now, because I did not want to pass yet
another mostly hard-coded bool flag to cache system. Since image is proxy, it
should be fast to read anyway.
In case of using offset property, code was modified to make sure we scale
image only once. I also tried to make code more readable and streamlined and
cleaned up surrounding functions a bit.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8203
Pass is_proxy_image to functions where images are loaded instead of comparing
image size to render size.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8128
Call function `BKE_scene_multiview_view_prefix_get` to ensure ext is not
NULL.
This already should happen in `seq_image_strip_is_multiview_render` though.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8081
Remove goto statement from `seq_render_image_strip()` and `seq_render_movie_strip()`.
`seq_render_image_strip_view()` and `seq_render_movie_strip_view()` is used to render individual views in both monoview and multiview branch.
I have included `seq_can_use_proxy()` for convinience
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D7870
Partialy fixes T73828
Currently all 3 effect inputs were assigned even if not all 3 were used.
This causes problems with reassigning effects in python, because 3rd input is
not accessible.
This patch will only assign inputs that are necessary for effect to work
properly.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D6868
Disable (skip) preftching scene strips if they target 3D scene.
Try to continue prefetching complete frame if disk cache images are found.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7514
Original code for copying strips tried to change strip name 2 times before
copying and once again after pasting.
Store structs in clipboard in unchanged state, so we can reference data after
pasting easily.
Better method would probably be storing animation data in clipboard as well,
so we can copy animated strips even between scenes.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7638
Adding recursive scenes has been disabled, but old files still can be opened.
Add check if scene will render itself.
Opening such file will produce warning on open and error on running render.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D7562
Do cross transition from current to next frame instead of displaying
one image for n frames.
Reviewed By: ISS, sergey, campbellbarton
Differential Revision: https://developer.blender.org/D7417
During scene copy modifier mask strips are relinked to point to strips in
new scene. If strip used as mask is in different seqbase, this can fail,
if seqbase is not copied yet.
Add SEQ_DUPE_IS_RECURSIVE_CALL flag to avoid relinking modifiers during recursive call.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7412
Add method to invalidate strip cache in range of non-overlapping strip.
Invalidate original strip in range of new strip created by cutting.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7313
`seq_free_animdata()` removes fcurve pointers belonging to strips from
`Scene` CoW datablock's `AnimData` during `BKE_scene_graph_update_for_newframe`.
This causes problems with updating animation.
This worked before rBbe2e41c397ba, because `AnimData` was freed by `BKE_animdata_free()`
before `seq_free_animdata()` was executed, so it had no data to operate on and returned
on precondition `if (scene->adt == NULL || scene->adt->action == NULL)`
Reviewed By: mont29, brecht
Maniphest Tasks: T74897
Differential Revision: https://developer.blender.org/D7264
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
This patch include changes:
- Thicker and clearer selection indication
- Slimmer handles
- More transparent muted strips
- Trim frame number is drawn inside the strip
- Strip text is drawn in upper part of strip
- Color strips now have specific color, with chosen color drawn under strip text
- Transition strip will use color of input strips showing direction of transition
- Selecting effect strip will highlight input strips
- Selecting multicam strips will highlight target channel
- Missing media state is now indicated by a red line drawn on the top part of the strip
- A checkerboard pattern is now drawn on the outsides of the meta range
- Hold still regions are now always drawn if existent, with a darker shade of the strip’s background color
Author: Alessio Monti di Sopra <a.monti>
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D6883
This patch implements dumping images from cache to HDD.
The main goal of this system is to provide a means to achieve consistent playback speed mainly for strips that are not possible to preview in real time.
How to use:
Disk cache has own settings in user preferences for path to storage, size limit and compression level.
To use disk cache, you need to check `Use Disk Cache` box, set `Disk Cache Directory`, `Disk Cache Limit` and save or open existing .blend file.
By default sequencer output will be cached only. Manual setting is possible in cache panel.
Uses:
- Replacement or alternative for proxies. Disk cache will work with any strip type, supports float images as well.
- Storage for strip thumbnails.
- Less RAM needs to be allocated for preview cache
How it works:
Disk cache is extension of RAM cache. Every image, that is stored or deleted in RAM will be stored or deleted on HDD as well. Images can be compressed to save space and for use on slower drives. Compressed images are slower to write and read though.
Images are stored in bulk of 100 rendered frames per one file. This is to overcome slow file access time for large amount of files. Drawback is, that if one frame needs to be redrawn, all 100 frames are deleted.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D5524
