This allows modifiers to have cache pointers that are preserved over undo steps.
I intend to use this for the baked data cache for the geometry nodes modifier.
Pull Request: https://projects.blender.org/blender/blender/pulls/117307
Except for vertex groups and a few older color types, these
are generally replaced by newer generic attribute types.
Also remove some includes of DNA_mesh_types.h, since it's
included indirectly by BKE_mesh.hh currently.
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Previously the panel type name of a modifier (e.g. "MOD_PT_Smooth") was
created by copying from the ModifierTypeInfos name.
This meant that modifiers with the same default name would use
the same identifier for the panels.
Since different object types (e.g. OB_GREASE_PENCIL and OB_MESH)
might want to use the same default modifier name, this PR introduces
an idname field in the ModifierTypeInfo struct. This is then used to
generate the panel type name.
For compatibility reasons, the idname is the same as the name for now.
Note: Because the name was used previously, this means that some
modifiers have spaces in their panel type name.
E.g. "MOD_PT_Volume to Mesh".
Pull Request: https://projects.blender.org/blender/blender/pulls/110468
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
Refactoring mesh code, it has become clear that local cleanups and
simplifications are limited by the need to keep a C public API for
mesh functions. This change makes code more obvious and makes further
refactoring much easier.
- Add a new `BKE_mesh.hh` header for a C++ only mesh API
- Introduce a new `blender::bke::mesh` namespace, documented here:
https://wiki.blender.org/wiki/Source/Objects/Mesh#Namespaces
- Move some functions to the new namespace, cleaning up their arguments
- Move code to `Array` and `float3` where necessary to use the new API
- Define existing inline mesh data access functions to the new header
- Keep some C API functions where necessary because of RNA
- Move all C++ files to use the new header, which includes the old one
In the future it may make sense to split up `BKE_mesh.hh` more, but for
now keeping the same name as the existing header keeps things simple.
Pull Request: https://projects.blender.org/blender/blender/pulls/105416
As described in #95966, replace the `ME_EDGEDRAW` flag with a bit
vector in mesh runtime data. Currently the the flag is only ever set
to false for the "optimal display" feature of the subdivision surface
modifier. When creating an "original" mesh in the main data-base,
the flag is always supposed to be true.
The bit vector is now created by the modifier only as necessary, and
is cleared for topology-changing operations. This fixes incorrect
interpolation of the flag as noted in #104376. Generally it isn't
possible to interpolate it through topology-changing operations.
After this, only the seam status needs to be removed from edges before
we can replace them with the generic `int2` type (or something similar)
and reduce memory usage by 1/3.
Related:
- 10131a6f62
- 145839aa42
In the future `BM_ELEM_DRAW` could be removed as well. Currently it is
used and aliased by other defines in some non-obvious ways though.
Pull Request #104417
Use a consistent style for declaring the names of struct members
in their declarations. Note that this convention was already used in
many places but not everywhere.
Remove spaces around the text (matching commented arguments) with
the advantage that the the spell checking utility skips these terms.
Making it possible to extract & validate these comments automatically.
Also use struct names for `bAnimChannelType` & `bConstraintTypeInfo`
which were using brief descriptions.
Currently you can retrieve a mutable array from a const CustomData.
That makes code unsafe since the compiler can't check for correctness
itself. Fix that by introducing a separate function to retrieve mutable
arrays from CustomData. The new functions have the `_for_write`
suffix that make the code's intention clearer.
Because it makes retrieving write access an explicit step, this change
also makes proper copy-on-write possible for attributes.
Notes:
- The previous "duplicate referenced layer" functions are redundant
with retrieving layers with write access
- The custom data functions that give a specific index only have
`for_write` to simplify the API
Differential Revision: https://developer.blender.org/D14140
