Issue is with rounding up of length reported by audaspace for audio part - when it matches nearly exactly
the actual video length, using ceil() would make it one frame longer. Now apply a small (0.0001 frame)
negative offset to prevent this effect.
When importing new movie strips into the sequencer, the scene's frame rate
will now be adjusted to match that of the movie being loaded by default.
To get the old behaviour (e.g. if importing a clip into an existing project),
disable the "Use Movie Framerate" option in the file browser when selecting
the strip.
This change is designed to solve the common problem that users trying to import
video clips will forget to adjust the frame rate before importing the clip, thus
causing the sound and video strips to be out of sync (as the sound strip ends
up longer/shorter than the video stream).
This mainly adds bpy.data.user_map() method, which goes over the whole Main database
to build a mapping (dict) {ID: {users_of_that_ID}}.
Very handy to check and debug ID usages, but could also be really valuable for py addons
creating temporary scenes, or some exporters, etc.
Note: current code in master's libquery misses some IDs (and reports some it should not,
like nodetrees), this is fixed in id-remap but still needs serious review before going to master.
This basically means that current bpy.data.user_map() **will not** report a complete and exhaustive
state of dependencies between IDs. Should work OK in most cases though.
Original work/idea comes from id-remap branch, was heavily reworked by @campbellbarton
and myself for master.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D1678
Note that this has little impact on current master - yet it allows to fix the 'Image Editor' bug
(open image in editor, use same image in texture, delete image from texture, image us is 0 and
red in image editor...) and probably a few other similar cases.
But that change is mandatory to get a proper handling of ID deletion/reamapping/reloading/etc. as done in id-remap branch.
Instead of just adding a user if none already present, new code use two new ID tags to get a three-states status:
- Normal: nothing changes.
- Needs extra user: we know that ID needs an extra user, so we take of never going down to 0 in 'real' usercount handling.
- Has extra user: we do have increased that ID usercount to get our needed extrauser.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1696
Looptri are not mesh data, they are allocated and built for PBVH only, and totally 'local' to it,
so duplicating like we do for verts & co leads to leaking memory.
It also fixes another issue (crash) related to symmetric editing.
Quite involved, we (try to!) fix complete broken logic of parts of particle code, which would use poly index
as tessface one (or vice-versa). Issue most probably goes back to BMesh integration time...
This patch mostly fixes particle editing mode:
- Adding/removing particles when using generative modifiers (like subsurf) should now work.
- Adding/removing particles with a non-tessellated mesh (i.e. one having ngons) should also mostly work.
- X-axis-mirror-editing particles over ngons does not really work, not sure why currently.
- All this in both 'modes' (with or without using modifier stack for particles).
Tech side:
- Store a deformed-only DM in particle modifier data.
- Rename existing DM to make it clear it's a final one.
- Use deformed-only DM's tessface2poly mapping to 'solve' poly/tessface mismatches.
- Make (part of) mirror-editing code able to use a DM instead of raw mesh, so that we can mirror based on final DM
when editing particles using modifier stack (mandatory, since there is no way currently to find orig tessface
from an final DM tessface index).
Note that this patch is not really nice and clean (current particles are beyond hope on this side anyway),
it's more like some urgency bandage. Whole crap needs complete rewrite anyway,
BMesh's polygons make it really hard to work with current system (and looptri would not help much here).
Also, did not test everything possibly affected by those changes, so it needs some users' testing & validation too.
Reviewers: psy-fi
Subscribers: dfelinto, eyecandy
Maniphest Tasks: T47038
Differential Revision: https://developer.blender.org/D1685
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
Vector mapping node was doing some weird mapping of both original and mapped
coordinates. Mapping of original coordinates was caused by the clamping nature
of the LUT generated from the node. Mapping of the mapped value again was quite
totally obscure -- one needed to constantly keep in mind that actual value will
be scaled up and moved down.
This commit makes it so values in the vector curve mapping are always absolute.
In fact, it is now behaving quite the same as RGB curve mapping node and the
code could be de-duplicated. Keeping the code duplicated for a bit so it's more
clear what exact parts of the node changed.
Reviewers: brecht
Subscribers: bassamk
Differential Revision: https://developer.blender.org/D1672
Also rearranged code here to not issue a draw call (explicit flush) per
face and not set shader per face either when stippled drawing is mixed
with regular drawing. Not good at all for performance.
This snippet creates a white balance modifier for the video sequence editor. It is useful for everyone who likes to set a new white point in the video source (easily via the eyedropper). Just select a point in the source file where you know that it should be white. The algorithm will then shift the colors towards your new white point.
See attached the image for a quick demo.
{F270576}
Reviewers: psy-fi
Reviewed By: psy-fi
Subscribers: Blendify
Projects: #bf_blender
Differential Revision: https://developer.blender.org/D1698
Gives a global speedup of about 5% in smoke simulation (as usual, parallelized chunks themselves
are about 15-25% quicker with BLI_task than with OMP), using a simple setup with two generators
(one from mesh, one from particles), an obstacle and a windfield.
* Don't copy name before entering new_id function. new_id does that for
us already.
* Take a main argument to make the function possible to use with
different databases
* Append BKE_ to rename_id
Historically blender had an audio sample rate of 44.1 kHz as default which is mostly popular because it's the sample rate of audio CDs. Audaspace kept using this default from the pre 2.5 era. It was about time to change to 48 kHz, which is a more widespread standard nowadays, especially in video. It is the recommended sampling rate of the Audio Engineering Society.
Further reading: https://en.wikipedia.org/wiki/44,100_Hz#Status
This is purely internal sanitizing/cleanup, no change in behavior is expected at all.
This change was also needed because we were getting short on ID flags, and
future enhancement of 'user_one' ID behavior requires two new ones.
id->flag remains for persistent data (fakeuser only, so far!), this also allows us
100% backward & forward compatibility.
New id->tag is used for most flags. Though written in .blend files, its content
is cleared at read time.
Note that .blend file version was bumped, so that we can clear runtimeflags from
old .blends, important in case we add new persistent flags in future.
Also, behavior of tags (either status ones, or whether they need to be cleared before/after use)
has been added as comments to their declaration.
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D1683
The is intended to replace the deprecated glPolygonStipple() calls with a shader
based alternative, once we switch over to GLSL shaders.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D1688
This commit merges all the work done in the GPencil_Editing_Stage3 branch
as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details
about the changes that this brings, see the WIP release notes:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
