Implemented basic audio animation.
* AnimatableProperty: Propper cache writing and spline interpolation for reading (the solution for stair steps in audio animation)
* Animatable properties so far are: volume, pitch, panning
* Users note: Changing the pitch of a sound results in wrong seeking, due to the resulting playback length difference.
* Users note: Panning only works for mono sources, values are in the range [-2..2], this basically controls the angle of the sound, 0 is front, -1 left, 1 right and 2 and -2 are back. Typical stereo panning only supports [-1..1].
* Disabled animation of audio related ffmpeg output parameters.
* Scene Audio Panel: 3D Listener settings also for Renderer, new Volume property (animatable!), Update/Bake buttons for animation problems, moved sampling rate and channel count here
Main: Complete rewrite of the sequencer related audio code to support 3D Audio objects later and especially adressing the animation system problems (see mailing list if interested).
Note: Animation is not working yet, so with this commit volume animation doesn't work anymore, that's the next step.
Minor things:
* Changed AUD_Reference behaviour a little to be more usage safe.
* Fixed bug in AUD_I3DHandle: Missing virtual destructor
* Fixed enmus in AUD_Space.h
* Fixed a warning in rna_scene.c
* Removed an unneeded call in rna_sound.c
This fixes bug #26764 and several others like it, where modifier
properties (and others, but most visibly modifiers) would not do
anything when animated or driven, as modifier properties require the
RNA update calls to tag the modifiers to get recalculated.
While just adding a call to RNA_property_update() could have gotten
this working (as per the Campbell's patch attached in the report, and
also my own attempt #25881). However, on production rigs, the
performance cost of this is untenatable (on my own tests, without
these updates, I was getting ~5fps on such a rig, but only 0.9fps or
possibly even worse with the updates added).
Hence, this commit adds a property-update caching system to the RNA
level, which aims to reduce to the number of times that the update
functions end up needing to get called.
While this is much faster than without the caching, I also added an
optimisation for pose bones (which are numerous in production rigs) so
that their property updates are skipped, since they are useless to the
animsys (they only tag the depsgraph for updating). This gets things
moving at a more acceptable framerate.
Generated images would not be re-generated with a float buffer on load, even when selected on creation.
Now save the float buffer setting as a generated image flag.
This means you can enable before baking to enable baking to a float buffer.
* Objects are now always rotated in the directions of the hair paths
* Secondary fix: particle size wasn't updated for hair particles, so dupliobject size couldn't be change after the hair was edited
* Noise is now considered an animated texture as it changes with every frame
* Converted a few places in particles code to use the particle system's own random table instead of BLI_frand.
This patch attempts to clean up and document the GPU buffers
code. There are a few bug fixes as well.
Patch reviewed here: http://codereview.appspot.com/4631052/
Summary:
* Bugfix: make GPU_buffer_copy_normal convert from shorts to floats
correctly, also fixed the use of cached face normal CustomData.
* Bugfix: changed the `mat_nr' field of GPUBufferMaterial from char to
short.
* Changed color buffer setup to not alloc a temporary copy of color
data, just passes the MCol data in directly.
* Changed the GPU buffer pool code to make clearer what operates
specifically on the global pool.
* Lots of refactoring for GPU_drawobject_new; should operate mostly
the same (except got rid of one unecessary allocation), just split
into more functions and without macros now.
* Converted some #defines into enumerations.
* Made some stuff private, pulled out of header file.
* Deleted unused function GPU_buffer_pool_free_unused().
* Removed GPU_interleaved_setup and related #defines. (I think this
was used for editmode VBOs, but those were disabled.)
* Added lots of comments.
* Added a few comments in the code signed `--nicholas' to note places
where I am unsure about design or usage, would be good to address
these better.
* Code formatting changed to be more consistent with the rest of
Blender.
* Renamed some fields and variables to be more consistent with
Blender's naming conventions.
* Renamed some fields and variables to use more descriptive names,
e.g. renamed `redir' to `mat_orig_to_new'.
* Removed print outs with DEBUG_VBO -- don't feel too strongly about
this one, just not used elsewhere in Blender, could be easily added
back if others disagree though.
* Moved the PBVH drawing code down to the bottom of the file, before
was sitting in the middle of the other VBO code
Softbody was still using a flag to determine if it should use the final or
deform derivedmesh, but this wans't exposed in the UI. Others systems use the
collision modifier, now softbody uses it also to get vertices and faces, but
with own collision code.
* When clicking on "Animation" items in the Outliner, there's now a
menu containing from which you can change the action used, and
refresh/delete all drivers.
* Moved action-setting logic for AnimData actions to a single utility
function in anim_sys, since this was starting to be done in too many
places already.
* Fixed Outliner refresh bug after changing the active action
* Horrors from the ancient world of deprecated code: object animation offset can't really work correctly with particles unless point cache takes full control of particle system timing.
* Disabled the non-working offset control from effecting particles so that for now particles will work consistently and the offset is only applied to the object.
===== Situation before this patch =====
in the current situation inside the node editor there is a properties panel (press 'n'-key). This pabel displays some information about the node, backdrop and grease pencil. The UI of the property panel is typically vertical oriented. Nodes in the other hand are not oriented in a direction. Both area's are draw via the same draw function.
With some nodes this will create not user-friendly UI. Try the color-balance for instance). The 3 color circles are drawn next to each other, it would be better to draw them below each other.
When creating more complex nodes you don't want to display all handles in the node-panel and in the properties panel. For instance fine-tuning handles you only want to appear in the property panel to reduce place in the node itself.
===== Situation after this patch =====
This patch separates the draw functions of the property panel and the node panel.
When no special draw function is created for the property panel, the draw function of the node will be used as 'fallback'
===== Impact =====
==== BKE_node.h ====
add a new uifunc (called uifuncbut) to the bNodeType struct. The definition is the same as the uifunc.
==== node_buttons.c ====
if the uifuncbut is set, call it. currently calls the uifunc method
==== drawnode.c ====
static void node_composit_set_butfunc(bNodeType *ntype). set the uifuncbut function where needed. When at the end of the method uifuncbut is still empty, set uifuncbut to the uifunc.
===== Final note =====
! PS. this is not limited to the compositor it also works for Materials and Textures !
! PPS. For other branching creating their own node-tree. Please make sure that your uifuncbut is set NULL or a valid draw function !
A mesh can consist out of multiple material. Take a character with clothing's. the skin can be a different material as the different clothing's. During compositing it is a common use-case to only do a part of the composit on only a specific material. Currently this can not be done.
In blender movies this feature is known to be implemented, but until now it never got integrated into trunk.
Proposal
With material index the Blender internal renderer will be capable of creating a buffer containing the material indexes of the first pixel-hit. This will be implemented in the same manner as the object index.
In the compositor the ID Mask node can be used to extract the information out of the Render pass.
Impact
User interface
On the properties-space the next changes will be done
Scene⇒Render layer⇒Passes⇒Material index will be added
Material⇒Options⇒Pass index will be added
DNA
Material struct will get an new field called “index”. this will be a short-type.
Material struct the field pad will be removed.
A new Render-layer pass will be added (bit 1«18)
RNA
Material RNA is updated (based on “pass index” from object)
Render layer RNA is updated (based on IndexOB)
Blender internal renderer
The Blender internal renderer will process the render pass as a copy of the Object index.
Blender compositor
The render layer input will get a new output socket called “IndexMA”
Usage
An example on how to use material index can be found at:
https://svn.blender.org/svnroot/bf-blender/trunk/lib/tests/compositing/composite_materialindex.blend
This is also example of a commit message longer than the commit itself :)
Objects with drivers are now treated as needing updates when the
current frame changes. This assumption has been documented in the
code, and should at least mean that users who try to use drivers for
creating simple time-based expressions that this should work.
Note:
- It is still recommended to create a "cfra" driver variable instead
of actually inlining bpy.context.scene.frame_current into the
expressions. Not only does the latter look rather nasty to type/have
in the expression, but it is also less future-proof for when I get
around to actually working on a beefed-up depsgraph (nothing official
on that front yet...)
* Use the same method as from unlinking actions to do this.
* Split off the make single-user code used for the ID-browser into a
function in blenkernel which can be used elsewhere. Getting materials
to also work using this method proved to be a bit too tricky (due to
the whole messy ob vs obdata situation), so I haven't done that.
Python:
* adds bpy.app.handlers which contains lists, each for an event type:
render_pre, render_post, load_pre, load_post, save_pre, save_post
* each list item needs to be a callable object which takes 1 argument (the ID).
* callbacks are cleared on file load.
Example:
def MyFunc(scene): print("Callback:", data)
bpy.app.handlers.render_post.append(MyFunc)
C:
* This patch adds a generic C callback api which is currently only used by python.
* Unlike python callbacks these are not cleared on file load.
