Upon conversion, the newly-created UV map with default name "UVMap"
should be translated.
Reviewed By: mont29
Maniphest Tasks: T103183
Differential Revision: https://developer.blender.org/D16775
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
The function was highly related to the apply modifier operator,
and only used once. This was too specific to be in the blenkernel,
especially in a mesh conversion file.
After switching over to using start_frame / end_frame, scaling an NLA strip didn't scale the strip, it just repeated the action.
Now withing the NLA transform code, we look for TFM_TIME_EXTEND / TFM_TIME_SCALE transform mode, and handle the update to strip scale accordingly
This is essentially a left-over from the initial transition to fields where this was
forgotten. The mesh primitive nodes used to create a named uv map attribute
with a hard-coded name. The standard way to deal with that in geometry nodes
now is to output the attribute as a socket instead. The user can then decide
to store it as a named attribute or not.
The benefits of not always storing the named attribute in the node are:
* Improved performance and lower memory usage when the uv map is not
used.
* It's more obvious that there actually is a uv map.
* The hard-coded name was inconsistent.
The versioning code inserts a new Store Named Attribute node that
stores the uv map immediatly. In many cases, users can probably just
remove this node without affecting their final result, but we can't
detect that.
There is one behavior change which is that the stored uv map will be
a 3d vector instead of a 2d vector which is what the nodes originally created.
We could store the uv map as 2d vector inthe Store Named Attribute node,
but that has the problem that older Blender versions don't support this
and would crash immediately. Users can just change this to 2d vector
manually if they don't care about forward compatibility.
There is a plan to support 2d vectors more natively in geometry nodes: T92765.
This change breaks forward compatibility in the case when the uv map
was used.
Differential Revision: https://developer.blender.org/D16637
Recently a new geometry node for splitting edges was added in D16399.
However, there was already a similar implementation in mesh.cc that was
mainly used to fake auto smooth support in Cycles by splitting sharp
edges and edges around sharp faces.
While there are still possibilities for optimization in the new code,
the implementation is safer and simpler, multi-threaded, and aligns
better with development plans for caching topology on Mesh and other
recent developments with attributes.
This patch removes the old code and moves the node implementation to
the geometry module so it can be used in editors and RNA. The "free
loop normals" argument is deprecated now, since it was only an internal
optimization exposed for Cycles.
The new mesh `editors` function creates an `IndexMask` of edges to
split by reusing some of the code from the corner normal calculation.
This change will help to simplify the changes in D16530 and T102858.
Differential Revision: https://developer.blender.org/D16732
Fixed more cases where attributes weren't being reinitialized
on switching PBVH mode:
* When PBVH_GRIDS and PBVH_BMESH force attributes into simple
array mode they no longer override simple_array in the
SculptAttributeParams parameters, instead they set a field
in SculptAttribute itself. Thus if the attribute is
reinitialized in another mode it won't retain the simple_array
parameter.
* sculpt_attribute_ensure_ex now calls sculpt_attr_update if
the attribute already exists.
* Fixed a bug from a couple commits ago that set
SculptAttribute.data_for_bmesh wrong.
PBVH draw code now builds coarse triangle index buffers
for multires. Note that the coarse grids can be at any
multires depth but is currently hardcoded to 1.
Before f1c0249f34 the material was assigned to the previous
slot rather than the next. Though the behavior is arbitrary, there
is no reason to change it.
The comment of `solve_cubic()` put the coefficients of the to-be-solved
cubic equation in the wrong order. This is now fixed.
No functional change, just a comment fix.
The OpenVDB delay loading of voxel leaf data using mmap works poorly on network
drives. It has a mechanism to make a temporary local file copy to avoid this,
but we disabled that as it leads to other problems.
Now disable delay loading entirely. It's not clear that this has much benefit
in Blender. For rendering we need to load the entire grid to convert to NanoVDB,
and for geometry nodes there also are no cases where we only need part of grids.
Previously, it wouldn't detect the case when one mesh had an attribute
that the other one did not. Not sure if this always was the case or whether
this less strict test was implemented accidentally at some point.
But it below the `else` case to make the control flow clearer, since
in the end that is more important. Also clarify the wording and fix
grammar slightly.
Similar to previous commits, avoid using pointers that are redundant
to their corresponding index. Also avoid storing the edge vectors stack
in the data-per-loop when it can just be a function argument.
Face corner normals are calculated when auto smooth or custom
per-corner normals are used.
This brings the per-face-corner data from 64 to 24 bytes, as measured by
`sizeof`. In a large test file I observed a 20% performance improvement,
from 285 to 239 ms.
The loop was also retrievable with the index. This needed some care
though, because previously the index became "detached" from the
corresponding MLoop pointer for a short time.
Since face corner indices are available, using pointers to MLoop and
other data is redundant. Using fewer local variables means there is less
state to keep track of when reading the algorithm, even if it requires
more characters in some cases.
The `lnor` pointer was only used for fans containing a single face,
and can be retrieved for a specific loop from the common data anyway.
Also saves 8 bytes per corner during the calculation
Add `bNode::index()` to allow accessing node indices directly without
manually de-referencing the runtime struct. Also adds some asserts to
make sure the access is valid and to check the nodes runtime vector.
Eagerly maintain the node's index in the tree so it can be accessed
without relying on the topology cache.
Differential Revision: https://developer.blender.org/D16683
This adds an explicit post processing step to node declarations.
The purpose of this is to keep the actual node declaration functions
concise by avoiding to specify redundant information. Also it improves
the separation of the creation of the declaration from using it.
Improve a few messages, but mostly fix typos in many areas of the UI.
See inline comments in the differential revisiion for the rationale
behind the various changes.
Differential Revision: https://developer.blender.org/D16716
Using a cache greatly simplifies access to the output node.
I touched on the most common and understandable cases for me.
The texture nodes were touched because it looked pretty generic.
Differential Revision: https://developer.blender.org/D16699
Don't use the same "context" struct for tagging sharp edges from auto-
smooth / poly flags and actually calculating face corner normals. That
required more arguments, and it required breaking const slightly to
reuse the code. Also split apart pre-populating corner normals
with vertex normals, since it isn't related at all and is only used
in one code path.
Texture usage flags can now be provided during texture creation specifying
the ways in which a texture can be used. This allows the GPU backends to
perform contextual optimizations which were not previously possible. This
includes enablement of hardware lossless compression which can result in
a 15%+ performance uplift for bandwidth-limited scenes on hardware such
as Apple-Silicon using Metal.
GPU_TEXTURE_USAGE_GENERAL can be used by default if usage is not known
ahead of time. Patch will also be relevant for the Vulkan backend.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15967
There is a more recent implementation as a geometry node, but this code
is used by RNA and Cycles still. In order to help understand the code
to tell if it can be replaced this makes some small changes:
- Use indexing instead of pointer incrementing
- Add const to unchanged arguments
- Avoid unnecessary indentation
- Use references for expected non-null arguments
The Blur Attribute node mixes values of neighboring elements in meshes and curves.
Currently it supports points, edges and faces on meshes and points on curves.
In theory, support for face corners could be added, but useful semantics are not
obvious yet.
The node calculates a weighted average of each element with its neighbors (based
on curve/mesh topology). The weight of the element itself is always 1, and the weight
of the neighbor elements is controlled by the weight input socket. In the future,
more options for how different elements are weight can be added (e.g. smoothing
groups and selection).
The node can perform multiple blurring iterations to achieve a blurrier result.
Generally, it is better to do multiple iterations in one node instead of using
multiple blur nodes because it has better performance in the current implementation.
We use the term "Blur" (instead of "Smooth") because smoothing is generally more
related to removing roughness from surfaces. When viewing the result of the
Blur Attribute node in the viewport, it looks like an image is blurred. While the
node can also be used to smooth surfaces, other/better algorithms exists for that
purpose (which e.g. don't reduce the volume of the mesh to zero with too many
iterations).
Differential Revision: https://developer.blender.org/D13952
Remove most of the old (pre-3.0) pose library:
- Remove The entire `editors/armature/pose_lib.c` file
- Deprecate `Object::poselib` in DNA
- Remove Operators marked as deprecated in T93405
- Remove RNA property `Object.pose_library`
- Add comment to clarify that the call `BLO_read_id_address(reader,
ob->id.lib, &ob->poselib);` handles deprecated data.
Note that this functionality has been documented as deprecated since
Blender 3.2.
What remains of the old pose library: The DNA for action markers
(`bAction::markers`) and the corresponding Python API. This will allow
future versions of Blender to still convert old pose libraries to new
ones (via the Pose Library panel in the Action editor).
Manifest task: T93406
You shouldn't be able to retrieve a mutable node from a const node tree
or a mutable socket from a const node. Use const_cast in one place in
order to correct this without duplicating the function, which is still
awkward in the C-API.
