Cycles is no longer using this. There are still addons using it but for
correct results with the new depsgraph this API should not be used.
Differential Revision: https://developer.blender.org/D3143
For the performance we convert object bases list to an array
during view layer evaluation. This makes it possible to have
very cheap index-based base lookup.
The goal of this change is to get rid of base used for function
binding, and avoid scene datablock expansion at the depsgraph
construction time.
WEBM is the codec name, and VP9 is the encoder (the older encoder "VP8"
is less efficient than VP9).
WEBM/VP9 and h.264 both have options to control the file size versus
compression time (e.g. fast but big, or slow and small, for the same
output quality). Since WEBM/VP9 only has three choices, I've chosen to
map those to 3 of the 9 possible choices of h.264:
- BEST → SLOWER
- GOOD → MEDIUM
- REALTIME → SUPERFAST
The VERYSLOW and ULTRAFAST options give very little extra benefit.
Reviewed by: @Severin
Issue was, *some* IDs (like infamous nodetrees from materials etc.)
would not go through the 'main' read_libblock() func, so their tags were
never reset.
So now, we ensure direct_link_id() always clear the tags, and move
setting them in read_libblock() after the call to direct_link_id().
Needed for depsgraph, but general healthier fix actually.
This is a part of copy-on-write sanitization, to avoid all the checks
which were attempting to keep sub-data pointers intact.
Point is: ID pointers never change for CoW datablocks, but nested
data pointers might change when updating existing copy.
Solution: Only bind ID data pointers and index of sub-data.
This will make CoW datablock 7update function was easier in 2.8.
In master we were only using pose channel pointers in callbacks,
this is exactly what this commit addresses. A linear lookup array
is created on pose evaluation init and is thrown away afterwards.
One thing we might consider doing is to keep indexed array of
poses, similar to chanhash.
Reviewers: campbellbarton
Reviewed By: campbellbarton
Subscribers: dfelinto
Differential Revision: https://developer.blender.org/D3124
- Undo that changes modes currently asserts,
since undo is now screen data.
Most likely we will change how object mode and workspaces work
since it's not practical/maintainable at the moment.
- Removed view_layer from particle settings
(wasn't needed and complicated undo).
- Use a single undo history for all operations.
- UndoType's are registered and poll the context to check if they
should be used when performing an undo push.
- Mode switching is used to ensure the state is correct before
undo data is restored.
- Some undo types accumulate changes (image & text editing)
others store the state multiple times (with de-duplication).
This is supported by checking UndoStack.mode `ACCUMULATE` / `STORE`.
- Each undo step stores ID datablocks they use with utilities to help
manage restoring correct ID's.
Needed since global undo is now mixed with other modes undo.
- Currently performs each undo step when going up/down history
Previously this wasn't done, making history fail in some cases.
This can be optimized to skip some combinations of undo steps.
grease-pencil is an exception which has not been updated
since it integrates undo into the draw-session.
See D3113
- Get memory usage from MemFile instead of MEM API
avoids possible invalid when threads alloc memory.
- Use size_t instead of uint and uintptr_t to store size.
- Rename UndoElem.str -> filename
- Rename MemFileChunk.ident -> is_identical
Need Clear ID recalc flag on load. Otherwise it's possible to have
some IDs considered always updated by Cycles, when they were saved
in a tagged-for-update state.
Thanks Bastien for feedback and review!
- put render iterator in own scope
(would shadow it's own variable if used multiple times).
- enforce semicolon at end of iterator macros.
- no need to typedef one-off macro structs.
Allows for each workspace to have it's own add-ons on display.
Filtering for: Panels, Menus, Keymaps & Manipulators.
Automatically applies to add-ons at the moment.
Access from workspace, toggled off by default
once enabled, add-ons can be white-listed.
See D3076
This is used to determine which voxels are to be considered empty space.
Previously it was hardcoded for converting dense grids to OpenVDB grids
to reduce disk space usage.
This value is also useful for rendering engines to know, i.e. to
optimize ray marching.
This allows allocation of VAOs from different opengl contexts and thread as long as the drawing happens in the same context.
Allocation is thread safe as long as we abide by the "one opengl context per thread" rule.
We can still free from any thread and actual freeing will occur at new vao allocation or next context binding.
Once 'losing lib' issue is fixed (in previous commit), we have new issue
that this could lead to several copies of the same linked data-block in
.blend file. Which is not good. At all.
So had to add a GHash-based check in libraries reading code to ensure we
only load a same ID from a same lib once.
The issue was that when a same lib was found several times in loaded
.blend, we'd only keep the first occurence. But since Blender expects
next data-blocks to belong to last found library, we could actually
be adding data-blocks assigned to copies of the duplicated lib to
another, totally unrelated lib.
Those data-blocks were then obviously not found when actually loading
libs content, and lost.
Note that this only fix one part of the issue, current code can
generate several copies of same linked data-block now, will fix in
another commit.
- When returning the number of items in a collection use BLI_*_len()
- Keep _size() for size in bytes.
- Keep _count() for data structures that don't store length
(hint this isn't a simple getter).
See P611 to apply instead of manually resolving conflicts.
It allows to have children hair to be twisted around parent curve, which is
quite an essential feature when creating hair braids.
There are currently two controls:
- Number of turns around parent children.
- Influence curve, which allows to modify "twistness" along the strand.
Due to changes in draw code particles from old files that may have had a
default draw size of 0 will not be visible. Old draw code would check
for this and adjust the size, however the unit for draw size has changed
from pixels to BU, and it no longer makes sense to have such checks.
This patch is to ensure particles from such files remain visible.
Now that the new 3D viewport draws to a multisample offscreen buffer, there is
no good reason anymore to create an entire multisample window and pay the
performance/memory cost for other regions that don't need it.
GL_MULTISAMPLE now only gets enabled for offscreen buffers, so we don't need
to check for it throughout the UI code anymore.
Differential Revision: https://developer.blender.org/D3062
Cycles already uses 1.5 as default. BI original 1.0 filter doesn't look good for
Eevee. The ideal scenario would be for both Cycles AND Eevee to use the same DNA
setting.
But for now it is nice to at least have Eevee renders to look better by default.
Note: This handles doversion for 2.7x files only. Files previously created in
2.8 need to be manually corrected.
- Read-only access can often use EvaluationContext.object_mode
- Write access to go to WorkSpace.object_mode.
- Some TODO's remain (marked as "TODO/OBMODE")
- Add-ons will need updating
(context.active_object.mode -> context.workspace.object_mode)
- There will be small/medium issues that still need resolving
this does work on a basic level though.
See D3037
