Allow Trackpad Ctrl-Pan to cycle enum values. Also allows cycling in more button types.
Differential Revision: https://developer.blender.org/D8535
Reviewed by Brecht Van Lommel
When using a trackpad Zoom to Mouse Position would always zoom to center of canvas.
Differential Revision: https://developer.blender.org/D8683
Reviewed by Brecht Van Lommel
Allow project to build without definition of optional UI_PROP_DECORATE.
Differential Revision: https://developer.blender.org/D8370
Reviewed by Julian Eisel
Ensure that Zoom does not crash on Mac Trackpad by checking for existence of Continuous Zoom timer.
Differential Revision: https://developer.blender.org/D8682
Reviewed by Julian Eisel
Improved calculation of checkbox width to include line width preference.
Differential Revision: https://developer.blender.org/D9025
Reviewed by Hans Goudey
Move popover down a very slight amount to fix clipping of its arrow tip.
Differential Revision: https://developer.blender.org/D9030
Reviewed by Julian Eisel
ASAN reported a use after free in after rB15d78ea85b602c. This commit
removed a reassignment of the `data` variable here that was actually
required because it may have been freed earlier in the function. This
sort of error would be avoided if the same variable wasn't reused for
different purposes.
This commit contains some improvements to this function to make this
function more purposeful and readable.
- Split updating information of the old button to a new function.
- Remove some 7 year old code disabled with `#if 0`.
- Add comments explaining some of the less obvious aspects.
Differential Revision: https://developer.blender.org/D9117
Approximately 141 changes of capitalization to conform to MLA title style.
Differential Revision: https://developer.blender.org/D8392
Reviewed by Julian Eisel
Menus with categories gain a dividing line and omit the title.
Differential Revision: https://developer.blender.org/D5135
Reviewed by Brecht Van Lommel
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
Scale widths of popovers and dialogs with Text Style font point changes.
Differential Revision: https://developer.blender.org/D9132
Reviewed by Hans Goudey
This patch implements panel expansion saving and resetting for property
search. While search is active, the panel expansion is based on whether
or not it has a search result. When the search finishes, the panel
expansion returns to its state before the search started. However, any
panels interacted with during the search won't reset their expansion.
This requires adding a new runtime flag for panels to store whether to
use search result status as expansion. It also requires better handling
for animation when panel expansion changes with another new runtime flag.
`UI_panel_is_closed` gets the search-dependent expansion, but it is
intentionally not used to access expansion in every case-- sometimes it's
necessary to use `PNL_CLOSED` directly.
Differential Revision: https://developer.blender.org/D8984
With all the work on DNA defaults for 2.91, it's nice to expose this
convenient operator. This was already hardcoded in the UI code to the
backspace key, adding it to the keymap instead will make the shortcut
automatically show in the button right click menu.
Differential Revision: https://developer.blender.org/D9219
This makes the icon equals to the invert icon used in all modifiers.
{F8986444}
Reviewed By: #user_interface, Severin, Blendify
Differential Revision: https://developer.blender.org/D9194
3bb3b2
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
This adds arguments to `uiLayout.prop_tabs_enum` and the C equivalent
(`uiItemTabsEnumR_prop`) to gray out tabs based on a boolean array.
For property search in multiple tabs, we need a way to show which tabs
have a search result, but we still need to show which tab is active.
Differential Revision: https://developer.blender.org/D8858
Changing the color of monochrome alert icons would not change until the theme was reloaded.
Differential Revision: https://developer.blender.org/D9062
Reviewed by Harley Acheson
Change to monochrome version of the large alert icons and use 'Question' for the the Quit Confirm dialog box.
Differential Revision: https://developer.blender.org/D9062
Reviewed by Pablo Vazquez
Default text output routines (which do not specify a size) will now use Text Style point size.
Differential Revision: https://developer.blender.org/D9107
Reviewed by Brecht Van Lommel
Due to the old AA method, it was necessary to add transparency to the
outline of the popover arrow to match the box outline opacity. This is
no longer required after rB15dda0115c78.
See the differential for before and after screenshots.
Differential Revision: https://developer.blender.org/D9026
Changes Workspace tabs so that the text size and tab width are both set by style.widget.points.
Differential Revision: https://developer.blender.org/D9108
Reviewed by Julian Eisel
The panel category tabs (In the 3D view N-panel) did not look great
when zoomed in or with high DPI screens, with multiple overlapping
outlines, and roundness that didn't match elsewhere in Blender. In
addition, there was some unecessarily low-level drawing code in the
panel code.
This commit uses an existing function `UI_draw_roundbox_4fv`to draw
the tabs instead. There are some slight visual differences, though
these are easily adjusted with theme colors.
Differential Revision: https://developer.blender.org/D9045
In the graph editor there is a panel that says "Active Keyframe" for
numerically editing a keyframe's values, but in the code there is no
concept of the "active keyframe." Since this is a useful concept to
have for some other features anyway, this commit adds an active
keyframe index value to FCurves. It also displays it with a theme
color for the active vertex (which didn't exist before) if the
FCurve is active.
The active keyframe in the graph editor is treated similarly to the
active vertex in the 3D view. It is the keyframe most recently selected
with a single click, and it is always selected.
For now, the only real functional change is that the active keyframe
appears in white and it should be more predictable which keyframe is
being edited in the sidebar panel.
Differential Revision: https://developer.blender.org/D7737
The buttons hide when the search finishes based on whether they are in
the "panel header" group. These buttons were not protected with a new
group. This adds a new group for operator button calls, and also makes
it so a new group is always created after the header buttons.
Declaring variables where they are initialized and used makes their
scope much more explicit and it aids readility since types are visible.
This commit doesn't touch the ID template code since there is an
active patch in that area.
Actually, fixes compile error and an incorrect poll.
Caused by 21fc4ae206 and 3a1cf838ca.
The poll has to perfrom the `view_zoom_poll()` logic to ensure correct context.
Uncovered by a4aa94c41c. Before that, it would actually be a possible `NULL`
pointer dereference.
It would happen if a `UILayout.prop()` was placed with the `full_event` option
set to `True` (or the C equivalent) for a non keymap-item property.
Now this the `full_event` option is ignored then with a warning print.
Multiple related issues:
* `view_zoomdrag_exec()` required `view_zoomdrag_init()` to be called first to
set up data. Can now easily be done in the `_exec()` function as well though.
* Because of that the operators could not be called in an `EXEC_` context (e.g.
`EXEC_REGION_WIN`).
* With "Zoom to Mouse Position" enabled, zooming from a menu or script would
zoom to the mouse position. That should only happen if the operators are
called directly in the editor.
`view_zoomdrag_init()` would perform a number of sanity checks that
`view_zoom_poll()` already executed. The design of operators forsees that
(non-expensive) context sanity checks are done by the `poll()` callbacks, and
the execution callbacks can then just assume that happened. No reason to be
overly pedantic, we don't do that elsewhere either.
Note that this code is from the earliest days of an operator design. So it's
not surprising that it wasn't using the design "properly".
This commit makes the panel expansion set based on the search results
when the active tab in the properties editor changes. The multi-tab
search patch (D8859) actually doesn't handle this because it uses a
different code path.
This feature uncovered a subtle but fairly significant issue with the
implementation of property search (More details in T81113). Basically,
the search needed multiple redraws to properly display the expansion of
panels based on the search results. Because there is no animation of
panel expansion when switching tabs, the problem was exposed only now.
With this commit, hiding of "search only" buttons and panel size
calculation happens in a single final step of the panel layout pass.
The "search only" layout root flag is removed. Instead every button
inside a panel header is in a single "uiButtonGroup" marked with a
specific "in header" flag, an idea which could be generalized in the
future.
Differential Revision: https://developer.blender.org/D9006
We have our own assert implementation, `BLI_assert()` that is prefered over the
C standard library one. Its output is more consistent across compilers and
makes termination on assert failure optional (through `WITH_ASSERT_ABORT`).
In many places we'd include the C library header without ever accessing it.
