Changes to scrollbars so that they are always visible, but thin and
dim, and widen and become more visible as your mouse approaches.
See D6505 for details and examples.
Differential Revision: https://developer.blender.org/D6505
Reviewed by Campbell Barton
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
The poll function with same semantic was defined in both screen and
mask space modules. The only reason for this seems to be that the
image editor needed a mask poll function which was private to the
mask module.
Make the mask editing poll functions public, avoiding code duplication.
Also, added a brief explanation about what the poll functions are
checking for.
No user-level changes are expected to happen.
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
- Avoid ambiguity which caused these values to be confused, use `mval`
for region relative mouse coordinates, otherwise `event_xy`.
- Pass region relative coordinates to sample_detail_dyntopo &
sample_detail_voxel as there is no reason to use screen-space values.
- Rename invalid use of mval for screen-space coordinates.
I'm using the tool icons for the brush themselves.
Note: This includes a few brushes that are only defined in D15134.
Those are simply the icons rendered with a world background of #282828.
Moves code for managing dragging data from buttons to a separate file.
This way all this closely related code is in one location, making it
easier to see how it all relates, and easier to find.
This patch fixes T90120. The fundamental problem is that 2d and the old 3d paint modes share a single Paint struct, ToolSettings->imapaint. This patch is a temporary fix until the new 3d paint mode (which has its own Paint struct) is released.
The patch works by listening for `NC_SCENE|ND_MODE` inside `image_listener` in `space_image.c`. It does not use `ED_space_image_paint_update` since that requires a `bMain.` Instead it calls `paint_cursor_start` (which is promoted to `ED_paint_cursor_start`). `image_paint_poll` is also promoted to an `ED_` function.
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D14946
Ref D14946
This could spam the console with errors (potentionally slowing down in
cases).
Was added in rBeae36be372a6, but not used.
Maniphest Tasks: T98565
Differential Revision: https://developer.blender.org/D15113
NOTE: this patch originated in T98015 which was split into multiple
reports. While it could be split into multiple patches these are very
much related so keeping as one for now
This patch fixes the following issues:
[1] autokeying transforms in preview only creates keyframes if there is
an FCurve already
[2] autokeying transforms in preview only creates keyframes for
rotation/scale if rotating/scaling around cursor (should keyframe
position as well)
[3] autokeying transforms in preview does not work during animation
playback
For [1], a param was added to `ED_autokeyframe_property` which can tweak
its default behavior of only creating keyframes on already keyed
properties (which was fine because this is mostly called from buttons
where this behavior is desired). Callers such as gizmos (or the VSE in
our case) can use this additional param so that keyframes are also
created on "not-yet-keyframed" properties.
For [2], the pivot is checked and position properties also keyed if
necessary (which is also consistent with the way objects are keyed in
the 3DView)
For [3], `animrecord_check_state` was changed to be able to work on
scenes as well and the transform system in the VSE preview was made
aware of the screen's `animtimer`.
NOTE: there are still things to be improved for keyframing in the VSE,
the most obvious is probably a `keyframe_insert` operator (with
keyingsets)
Fixes T98429, T98430, T98431
Maniphest Tasks: T98015, T98431, T98430, T98429
Differential Revision: https://developer.blender.org/D15047
Since [0], transform gizmos are no longer hidden during transform.
The same can be observed for rotation gizmos.
However, as a workaround for these rotation gizmos, there was already a
drawing utility running.
With the gizmo and the utility this drawing is now being done twice.
So remove the utility/workaround and update the gizmo accordingly.
[0] {648350e456490f8d6258e7de9bf94d3a6a34dbb2}
Differential Revision: https://developer.blender.org/D9542
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
Sculpt undo now detects if an attribute layer has
changed type/domain and unconverts it back. This
is a temporary workaround to a more fundamental
bug in the undo system.
Memfile undo assumes it can always rebuild the
application state from the prior undo step,
which isn't true with incremental undo systems.
The correct fix is to push an extra undo step prior
to running an operator if an incremental undo system
is active and the operator is using memfile undo.
The original fix for T97366 was too restrictive and breaks real-world
cases of single-file UDIM textures. See D13297 for an example.
This patch effectively reverts the original fix and instead fixes the
downstream code to accept single-file ranges as necessary.
Note: This means it is very important for users to make use of the
"UDIM detection" option during `image.open` or drag n' drop scenarios in
order to declare their intent when loading their files.
Differential Revision: https://developer.blender.org/D14853
Currently strings are used for cases where a list of identifiers would
be useful to show.
Add support for string properties to reference a callback to populate
candidates to show when editing a string. The user isn't prevented from
typing in text not found in this list, it's just useful as a reference.
Support for expanding the following strings has been added:
- Operator, menu & panel identifiers in the keymap editor.
- WM operators that reference data-paths expand using the
Python-consoles auto-complete functionality.
- Names of keying sets for insert/delete keyframe operators.
Details:
- `bpy.props.StringProperty` takes an option `search` callback.
- A new string callback has been added, set via
`RNA_def_property_string_search_func` or
`RNA_def_property_string_search_func_runtime`.
- Addresses usability issue highlighted by T89560,
where setting keying set identifiers as strings isn't practical.
- Showing additional right-aligned text in the search results is
supported but disabled by default as the text is too cramped in most
string search popups where the feature would make sense. It could be
enabled as part of other layout tweaks.
Reviewed By: brecht
Ref D14986
8f79fa9c67 was an attempt to fix this already, but it didn't quite
work. Problem was that the tooltip was messing with the drop-box and
operator properties, setting the name property for its own internal
logic. This name property would then be used rather than the session
UUID to query the material, which gave the wrong material (linking can
result in multiple IDs of the same type with the same name). A followup
commit will further sanitize this.
Existing code to replace the file operation was failing when done from
the window for the file operation itself.
Basically, this patch does two things:
- Implement a well defined window context to use as the "owner" or
"root" of the File Browser. This will be used for managing the File
Browser and to execute the file operation, even after the File Browser
was closed.
- Ensure the context is valid when dealing with file File Browser event
handlers.
Previously the window context just wasn't well defined and just happened
to work well enough in most cases. Addressing this may unveil further
issues, see T88570#1355740.
Differential Revision: https://developer.blender.org/D13441
Reviewed by: Campbell Barton
Previously we would pass button state and draw information to widget
draw callbacks in a rather hacky way. Some specific flags from
`uiBut.flag` were masked out, so their bits could be reused for also
passing `uiBut.drawflag` in the same int. Instead this commit introduces
a state-info struct that can properly hold all the relevant data.
This has the advantage that it's now easier to introduce new state data
that needs to be accessible in the widget callbacks. Since we are
running out of button flags, we plan to reorganize button flags, and
split them up into multiple bitfields. In the widget drawing code, this
would have been a hassle earlier.
Also had to add a new widget callback to draw blocks as widgets (popup
backgrounds), since that would pass block flags where we would usually
pass button flags. This wasn't nice, now it's separated more clearly.
This flag was used to activate the hotkey input buttons (e.g. for
"Assign Shortcut") when opened in a popup. Since this was added, other
more generalized ways of getting this same behavior were implemented.
Had to tweak the hotkey button event handling a bit, but it seems to
behave exactly as before now.
View roll checked if the resulting roll was close to a view axis
but didn't write the aligned quaternion back to the final result.
Add ED_view3d_quat_to_axis_view_and_reset_quat since most callers
to ED_view3d_quat_to_axis_view will reset the quaternion when a view
aligned axis is found.
This operator allows to add a new scene at the same time that the strip. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97678
Differential Revision: https://developer.blender.org/D14790
Issue is that the operator acts on the active button, and also uses that in the
poll. So the actually active button would affect the poll of a different
button. For the superimposed icons we need to be able to execute these polls
properly for non-active buttons.
This enables temporarily overriding the active button for lookups via context.
While a bit of a hack it makes sense conceptually.
Reviewed By: Campbell Barton
Maniphest Tasks: T97518
Differential Revision: https://developer.blender.org/D14880
Issue is that the operator acts on the active button, and also uses that in the
poll. So the actually active button would affect the poll of a different
button. For the superimposed icons we need to be able to execute these polls
properly for non-active buttons.
This enables temporarily overriding the active button for lookups via context.
While a bit of a hack it makes sense conceptually.
Reviewed By: Campbell Barton
Maniphest Tasks: T97518
Differential Revision: https://developer.blender.org/D14880
