This was a mistake in 17a773cdce - I did not notice existing set
function and assumed, that property set DNA directly.
Both get and set functions are now available and readonly flag is
removed.
The mask is expected to be always be displayed smooth, and the
option mainly existed for some legacy drivers. IF smooth drawing
causes issues it should be fixed in the drawing code, not as an
option in the interface.
Differential Revision: https://developer.blender.org/D15266
Since 7afcfe111a `startdisp` and `enddisp` fields are used as runtime
position storage for effect strips exclusively.
Use getter functon to return handle position and make properties read
only.
Use function `sequence_editor.display_stack(meta_strip)` to set
displayed timeline content.
To view top-level timeline, that does not belong to any meta strip, pass
`None` as argument.
Differential Revision: https://developer.blender.org/D12048
As described in T98943, this commit adds a node that can
evaluate a field on a separate domain in a larger field context.
This is potentially useful in many cases, to avoid relying on
a separate capture attribute node, which can make it easier
to build reusable fields that don't need geometry inputs.
Internally, the node just evaluates the input field in the larger
field context and then uses the generic domain interpolation,
so the code is simple. One future optimization might be using
the input selection to only evaluate part of the input field, but
then the selection has to be interpolated as well, and that might
not always be worth it.
Differential Revision: https://developer.blender.org/D15289
Before [0] mouse-motion events left the 'event.value' un-changed,
so a mouse-move would be set to PRESS/RELEASE based on previous events.
Support accessing the previous event value directly
to address feedback from T99102.
Note that the previous cursor location is already exposed.
[0]: 52af3b20d4
We store various lazily calculated caches on meshes, some of which
depend on the vertex positions staying the same. The current API to
invalidate these caches is a bit confusing. With an explicit set of
functions modeled after the functions in `BKE_node_tree_update.h`,
it becomes clear which function to call. This may become more
important if more lazy caches are added in the future.
Differential Revision: https://developer.blender.org/D14760
Add a `BKE_action_fcurves_clear(action)` function, which removes all the
Action's FCurves, and expose it as `ActionFCurves.clear()` in RNA.
This is more ergonomic than calling `remove` on f-curves until the list
is empty.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14660
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
Baking assumed that color attributes could only have two configurations:
float color data type on vertices, or byte color type on face corners.
In reality the options can be combined to make four total options.
This commit handles the four cases explicitly with a somewhat
more scaleable approach (though this should really be C++ code).
This commit also changes some related error messages, tooltips,
and an enum name, in order to make the functionality more obvious.
Differential Revision: https://developer.blender.org/D15244
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
Add a RNA update function for output video codec setting to update
properties that are incompatible with defaults.
Previously video output bitrate settings were omitted because of the
Constant Rate Factor (CRF) default. CRF setting for video codec is only
available for H264, MPEG4 and WEBM/VP9 outputs, so for the others
changing encoder quality mode to constant bitrate (CBR) as CRF is not
supported.
Reviewed By: ISS, mano-wii
Differential Revision: https://developer.blender.org/D15201
This also renames Hair Curves to Curves. Meaning that until we get
rid of the old curve type we will have both of those entires there:
* Curve
* Curves
This rna enum is used among other things in the driver UI to pick
which data-block you want the property from.
Regression in [0] unintentionally renamed COORDINATES.
There was a naming discrepancy when two (nearly) identical arrays,
de-duplicating them caused the error.
[0]: 94444aaadf
I'm using the tool icons for the brush themselves.
Note: This includes a few brushes that are only defined in D15134.
Those are simply the icons rendered with a world background of #282828.
The "bl_order" property on add-on UI panels can be used to put
them in a specific order regardless of the order of registering.
This patch makes this ordering also possible for panels inside panels.
Differential Revision: https://developer.blender.org/D15174
The problem with T98683 is that sampling interval can be set to very small,
resulting in very dense points. This patch attempts to optimize that a little bit.
Reviewed By: Antonio Vazquez (antoniov)
Differential Revision: https://developer.blender.org/D15180
Usefull to easily trim away the 'aray index' part of an RNA path, e.g.
when searching for an FCurve (which never contains that index part in
its RNA path).
RNA camera code did not handle path for its image/movieclip users
sub-data, and moviclip RNA struct definition did not have a rna path
function at all.
This commit ports the "Set Spline Type" node to the new curves type.
Performance should be improved in similar ways to the other refactors
from the conversion task (T95443). Converting to and from Catmull Rom
curves is now supported. There are a few cases where a lot of work can
be skipped: when the number of points doesn't change, and when the
types already match the goal type.
The refactor has a few other explicit goals as well:
- Don't count on initialization of attribute arrays when they are
first allocated.
- Avoid copying the entire data-block when possible.
- Make decisions about which attributes to copy when changing curves
more obvious.
- Use higher-level methods to copy data between curve points.
- Optimize for the common cases of single types and full selections.
- Process selected curves of the same types in the same loop.
The Bezier to NURBS conversion is written by Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D14769
This mirrors the C++ attribute API better, separates the implementation
of attributes from CustomData slightly, and makes functions simpler,
clearer, and safer.
Also fix an issue with removing an attribute caused by 97712b018d
meant the first attribute with the given type was removed instead of
the attribute with the given name.
The transformation snapping code contains a bunch of `#define`s, some ambiguously or incorrectly named attributes. This patch contains refactored code to improve this. This patch does (should) not change functionality of snapping.
Clarified ambiguously / incorrectly named attributes.
- "Target" is used to refer to the part of the source that is to be snapped (Active, Median, Center, Closest), but several other areas of Blender use the term "target" to refer to the thing being snapped to and "source" to refer to the thing getting snapped. Moreover, the implications of the previous terms do not match the descriptions. For example: `SCE_SNAP_TARGET_CENTER` does not snap the grabbed geometry to the center of the target, but instead "Snap transforamtion center onto target".
- "Select" refers to the condition for an object to be a possible target for snapping.
- `SCE_SNAP_MODE_FACE` is renamed to `SCE_SNAP_MODE_FACE_RAYCAST` to better describe its affect and to make way for other face snapping methods (ex: nearest).
Refactored related `#define` into `enum`s. In particular, constants relating to...
- `ToolSettings.snap_flag` are now in `enum eSnapFlag`
- `ToolSettings.snap_mode` are now in `enum eSnapMode`
- `ToolSettings.snap_source` (was `snap_target`) are now in `enum eSnapSourceSelect`
- `ToolSettings.snap_flag` (`SCE_SNAP_NO_SELF`) and `TransSnap.target_select` are now in `enum eSnapTargetSelect`
As the terms became more consistent and the constants were packed together into meaningful enumerations, some of the attribute names seemed ambiguous. For example, it is unclear whether `SnapObjectParams.snap_select` referred to the target or the source. This patch also adds a small amount of clarity.
This patch also swaps out generic types (ex: `char`, `short`, `ushort`) and unclear hard coded numbers (ex: `0`) used with snap-related enumerations with the actual `enum`s and values.
Note: I did leave myself some comments to follow-up with further refactoring. Specifically, using "target" and "source" consistently will mean the Python API will need to change (ex: `ToolSettings.snap_target` is not `ToolSettings.snap_source`). If the API is going to change, it would be good to make sure that the used terms are descriptive enough. For example, `bpy.ops.transform.translate` uses a `snap` argument to determine if snapping should be enabled while transforming. Perhaps `use_snap` might be an improvement that's more consistent with other conventions.
This patch is (mostly) a subset of D14591, as suggested by @mano-wii.
Task T69342 proposes to separate the `Absolute Grid Snap` option out from `Increment` snapping method into its own method. Also, there might be reason to create additional snapping methods or options. (Indeed, D14591 heads in this direction). This patch can work along with these suggestions, as this patch is trying to clarify the snapping code and to prompt more work in this area.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D15037
This implements transform modes for the transform tool and Elastic
Transform. This mode uses the Kelvinlets from elastic deform to apply
the transformation to the mesh, using the cursor radius to control the
elasticity falloff.
{F9269771}
In order for this to work, the transform tool uses incremental mode when
elastic transform is enabled. This allows to integrate the displacement of
the Kelvinet in multiple steps.
Review By: Sergey Sharbin & Daniel Bystedt & Julian Kaspar & Campbell
Barton
Differential Revision: https://developer.blender.org/D9653
Ref D15041
This was leading to some crashes and warnings such as:
"Code marked as unreachable has been executed. Please report this as a bug."
Differential Revision: https://developer.blender.org/D15116
In the latest discussions about curves/hair mesh attachement
information (T95776), it was decided to use UV coordinates to
store where on the mesh each root is. For that, we have to specify
which of the UV map attributes to use for UV lookups.
This property isn't used yet, but it will be shortly when refactoring
the attachement information in the add brush and the to particle
system conversion.
Differential Revision: https://developer.blender.org/D15115
Instead of directly accessing constraint-specific callbacks
in code all over blender, introduce two wrappers to retrieve
and free the target list.
This incidentally revealed a place within the Collada exporter
in BCAnimationSampler.cpp that didn't clean up after retrieving
the targets, resulting in a small memory leak. Fixing this should
be the only functional change in this commit.
This was split off from D9732.
Differential Revision: https://developer.blender.org/D13844
The packed image loader was not aware of the fact that UDIM tiles
can be of a different size.
Exposed Python API required to access this information. It has the
same complexity as the "regular" packed files: in both cases the
ImBuf will be acquired and released to access the information.
While the current workflow of packing UDIMs is not very streamlined,
it is still possible and is something what the studio is using here.
Test file:
{F13130516}
Expected behavior achieved with this patch: a bigger checker board
pattern in viewport render
Actual behavior prior to this patch: either memory corruption, or
wrong/black render result on the plane
Differential Revision: https://developer.blender.org/D15111
This did not refresh the Image editor, but more importantly this now
appeared cropped (a regression from the partial image updater).
Solved in the RNA function by:
- calling BKE_image_partial_update_mark_full_update
- sending appropriate notifier
Maniphest Tasks: T98573
Differential Revision: https://developer.blender.org/D15110
Main motivation is from T54314 where there was no way to read from a
Viewer image datablock after the compositor has run.
The only solution there was to do a full rerender (which obviously takes
much longer). Adding a handler avoids having to rerender.
This uses new syntax from rBf4456a4d3c97 and also adds "COMPOSITE" as a
job type that can be queried by `bpy.app.is_job_running`.
NOTE: there is another issue when multiple viewers are used and these
get active via RNA (compo execution is not triggered there yet -- unlike
when a viewer is selected in the Editor -- this is an issue of
`ED_node_set_active` vs. only `nodeSetActive`, but this will be tackled
separately)
Maniphest Tasks: T54314
Differential Revision: https://developer.blender.org/D15078
