Update to the new naming convention for `Light Probes`:
`Reflection Cubemap` -> `Sphere`
`Reflection Plane` -> `Plane`
`Irradiance Grid` -> `Volume`
Note that this breaks the Python API (`bpy.types.LightProbe.type`).
Pull Request: https://projects.blender.org/blender/blender/pulls/113452
Move the three current 'status variables' (stop, update and progress)
into a single 'WorkerStatus' struct. This is cleaner and will allow for
future workin this area without having to edit tens of 'startjob'
callbacks signatures all the time.
No functional change expected here.
Note: jobs' specific internal code has been modified as little as
possible, in many cases the job's own data still just store pointers to
these three values. Ideally in the future more refactor will be using a
single pointer to the shared `wmJobWorkerStatus` data instead.
Pull Request: https://projects.blender.org/blender/blender/pulls/113343
This avoid confusion outside of the shader node GLSL code.
The issue also is that Metal allow float to cast to bool
implicitly but this create a compilation error on
OpenGL.
This adds a new entry to the split sum LUT to isolate
the effect of the F82 tint.
The application of the tint part is similar to cycles
and uses the same way for precomputing the `b` factor.
Results matches almost perfectly to the extent of the
split sum approximation.
Note that this removes the unused LTC MAG LUT for
EEVEE next to make space for the new table. It can still
be added back if needed.
Pull Request: https://projects.blender.org/blender/blender/pulls/112881
This keeps the behavior similar to the Disney BRDF, where 0.5
is neutral and lower/higher values respectively decrease/increase
the dielectric specular. But it's more correct in that it's not
an arbitrary scale on Fresnel, but rather adjusting the IOR.
Ref #99447
Ref #112848
Pull Request: https://projects.blender.org/blender/blender/pulls/112552
because it contains reflectance and transmittance, so BSDF would be a
morep proper name.
Also rename BSDF to BRDF at places where only reflectance is returned.
- Adds tint control, which simulates volumetric absorption inside the coating.
This results in angle-dependent saturation and affects all underlying layers
(diffuse, subsurface, metallic, transmission). It provides a physically-based
alternative to ad-hoc effects such as tinted specular highlights.
- Renames the component from "Clearcoat" to "Coat", since it's no longer
necessarily clear now. This matches naming in e.g. other renderers or OpenPBR.
- Adds an explicit Coat IOR input, in preparation for future smarter IOR logic
around the interaction between Coat and main IOR. This used to be hardcoded
to 1.5.
- Removes hardcoded 0.25 weight multiplier, and adds versioning code to update
existing files accordingly. OBJ import/export still applies the factor.
- Replaces the GTR1 microfacet component with regular GGX. This removes a corner
case in the Microfacet code, solves #53038, and makes us more consistent with
other standard surface shaders. The original Disney BSDF used GTR1, but it
doesn't appear that it caught on in the industry.
Co-authored-by: Weizhen Huang <weizhen@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/110993
5cf7089e43 added the `BuiltinBits::LAYER` to shaders with a geometry
stage. This causes compilation errors when
`GLContext::layered_rendering_support` is false (otherwise the flag
does nothing).
This PR moves the `LAYER` flags to the `no_geom` shader versions and
adds a check to `ShaderCreateInfo::finalize()` to ensure the `LAYER` flag
is not used in shaders with a geometry stage.
Pull Request: https://projects.blender.org/blender/blender/pulls/112245
Some shaders using gl_Layer/gpu_Layer were missing
the correct usage bit in the shader create info. Shaders
also need to inherit feature usage bits from included
additional_info.
Authored by Apple: Michael Parkin-White
Pull Request: https://projects.blender.org/blender/blender/pulls/111751
changes include:
* Use microfacet normal instead of macronormal. Previously Cycles used
macronormal for Glass BSDF and Transmission component in Principeld
BSDF, leading to artefacts at grazing angles. This has been corrected
in 5f9b518a8b and 89218b66c2. Now change EEVEE to match this behaviour.
* GGX distribution is now darker due to the shadowing-masking term,
while Multiscatter GGX preserves energy. This now matches Cycles too.
Pull Request: https://projects.blender.org/blender/blender/pulls/111687
* `RUNTIME_LUT_CREATION` is disabled by default, but if set to `true`,
the new `bxdf_lut_frag.glsl` should generate the LUT that is submitted
in this commit. This new LUT is very close to the previously stored one.
* Generate the LUT by Monte-Carlo sampling with \(I = 1/N\sum\frac{f}{p}\),
except that the samples are not random, but mapped from a regular grid,
following previous approach to avoid interpolation artefacts caused by
noise.
* Added comments to make the computed quantities and the LUT usage more
clear.
* Glass with `IOR < 1` is now slightly darker due to single-scattering.
The lost energy will be recovered in a future commit.
* The special cases of `IOR == 0`, `roughness == 0` and `roughness == 1`
are handled well during microfacet sampling and evaluation, no need to
clamp.
* When `IOR == 1`, in theory BRDF is zero and BTDF is one, but we do not
make it a special case to allow smooth transition.
Pull Request: https://projects.blender.org/blender/blender/pulls/111632
* Using standard NDF and Smith shadowing-masking terms. The previous
`xxxx_opti()` functions were faster to evaluate, but confusing and
error-prone.
* After correcting the BRDF pdf, the prefiltered environment LOD bias
needs to be adjusted to avoid overblurred reflections.
* Corrected the half-vector computation in BTDF evaluation, added check
for invalid configuration due to total internal reflection or `eta == 1`.
* Use `saturate()` instead of `max()` when no division is needed because
the former is faster.
* Indirectly fixes EEVEE-Next refraction denoising.
Pull Request: https://projects.blender.org/blender/blender/pulls/111591
When GLSL sources were first included in Blender they were treated as
data (like blend files) and had no license header.
Since then GLSL has been used for more sophisticated features
(EEVEE & real-time compositing)
where it makes sense to include licensing information.
Add SPDX copyright headers to *.glsl files, matching headers used for
C/C++, also include GLSL files in the license checking script.
As leading C-comments are now stripped,
added binary size of comments is no longer a concern.
Ref !111247
Including <iostream> or similar headers is quite expensive, since it
also pulls in things like <locale> and so on. In many BLI headers,
iostreams are only used to implement some sort of "debug print",
or an operator<< for ostream.
Change some of the commonly used places to instead include <iosfwd>,
which is the standard way of forward-declaring iostreams related
classes, and move the actual debug-print / operator<< implementations
into .cc files.
This is not done for templated classes though (it would be possible
to provide explicit operator<< instantiations somewhere in the
source file, but that would lead to hard-to-figure-out linker error
whenever someone would add a different template type). There, where
possible, I changed from full <iostream> include to only the needed
<ostream> part.
For Span<T>, I just removed print_as_lines since it's not used by
anything. It could be moved into a .cc file using a similar approach
as above if needed.
Doing full blender build changes include counts this way:
- <iostream> 1986 -> 978
- <sstream> 2880 -> 925
It does not affect the total build time much though, mostly because
towards the end of it there's just several CPU cores finishing
compiling OpenVDB related source files.
Pull Request: https://projects.blender.org/blender/blender/pulls/111046
