Fix an issue where a `UI_BTYPE_CHECKBOX_N` button couldn't be toggled.
When toggling the value of a property, the `UI_BTYPE_TOGGLE_N`,
`UI_BTYPE_ICON_TOGGLE_N`, and `UI_BTYPE_CHECKBOX_N` types shouldn't
matter. These determine the inverted display of the value, but toggles
of that value should still happen once.
For these button types, the toggle happened twice, effectively making it
a no-op. The code for individual values is now also consistent with the
code for handling bit-flags.
Actually found & over-the-shoulder-reviewed by @Severin
Freeze happened when reloading a library while having an Object property
with a custom getter function defined in Python.
Just piggybacking on rB62eb21e3ce87, this just applies the same fix (use
the BPy_BEGIN/END_ALLOW_THREADS macros) to relading from RNA/py.
All credit goes to @brecht and @mont29.
Maniphest Tasks: T101618
Differential Revision: https://developer.blender.org/D16167
Crash happened when adjusting operator props in Adjust Last Operation
panel.
When there are more than 32 objects selected in muti-object-editmode, we
are running into RNA array limit (`objects_selection_count` is defined as
an RNA array (which can only hold 32 entries, see
`RNA_MAX_ARRAY_LENGTH`), leading to reading random memory errors.
While there might be ways to make this work with more than 32 selected
objects (e.g. by instead using a collection, or investigate supporting
dynamic sized arrays for run-time RNA), this patch only cancels the
operator with a report message (instead of crashing).
Maniphest Tasks: T101492
Differential Revision: https://developer.blender.org/D16115
The problem was the conversion to object space converted the
points to zero.
Now, the new function `zero_axis_bias_m4` is used in order to add
a small bias in the inverse matrix and avoid the zero points.
A known math issue is the stroke can be offsetted if the scale is set to 1
again. In this case apply the scale to reset to 1.
Differential Revision: https://developer.blender.org/D16162
Fix reroute nodes added via the cut link gesture being parented to the
wrong frame node.
The frame's bounds that are used for the intersection test with the
newly added reroute are in view space, but the reroute's location was
given in the node tree's coordinate space, when the add reroute
operator was recently refactored (56193eccf6).
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16163
Uses soft and hard max of the resolution properties.
Range for order U/V was 2-6, but after testing higher max values with
NURB splines and surfaces with many control points, no problems were
found.
Reviewed By: campbellbarton
Ref D13918
Using 'short' was historic (as the value was stored in the Base).
Prefer floats which allow sub-pixel distances to be differentiated.
Also remove IS_CLIPPED assignment as this only made sense when the
values were stored in the Base, without any other ways to check
if projection failed.
In some situations the zero axis can produce problems and need to add a small bias.
This function adds a small bias using the orthogonal result of the others valid axis.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D16158
6d
This also removes the need to compute the persmat and saves some memory
from the `ViewInfos` struct. This is needed to allow multiview support.
Initial testing found no major performance regression during vertex
heavy workload.
Test file: {F13610017}
Results:
| Platform | Master | Split Matrix|
| Linux + Mesa + AMD W6600 | 48 fps | 47 fps |
| Macbook Pro M1 | 50 fps | 51 fps |
| Linux + NVidia 1080Ti | 51 fps | 52 fps |
| Linux + Radeon Vega 64 | 25.6 fps | 26.7 fps |
Increased precision when far from origin:
{F13610024}
{F13610025}
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D16125
Completely skip the work of interpolating domains for single values
for many to and from combinations. Similar to 535f50e5a6,
but slightly more complex because of the possibility of loose elements
on some mesh domains.
From D16054, with added comments.
Unfortunately this commit changed behavior in a fundamental way that
can't be addressed without larger changes. Previously the position
outputs were evaluated on the edge domain and then interpolated to the
context domain, which could be useful for some rudimentary mesh smoothing.
After the commit they were just evaluated at the specified index, which
looks practically random when evaluated on a different domain. We may need
a new node that doesn't have the implicit behavior in the future.
This reverts commit 4ddc5a936e.
- Active Track (NLA vs movie clip)
- New (file)
- Object Index (loop cut)
- Object Index (render pass)
- Proxy Storage (sequence)
- Rim (Solidify modifier)
- Roughness (particle children)
- Spaces (text whitespace)
- Out (sequencer wipe transition)
Also make new asset tag name translatable.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16067
These item names and descriptions never got extracted because they're
not in the RNA until the proper context occurs, and so the extraction
script never even knew about them.
The properties are mostly located in the fluids UI.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15994
RNA code to create new actions did not properly remove the extra user
set by default, as done in other `new` callbacks of other ID types.
NOTE: Mask ID had the same issue, also fixed in this commit.
NOTE: At some point this needs to be properly fixed, default super-low
level ID creation code should simply not add a 'default' user, this is
extremely bad design and forces higher-level code to do all kind of
extra work to get rid of it half of the time, in very unclear and
confusing ways and places.
Blender is using more and more temporary Main data-base (historically
for reading linked data, but also now when resyncing liboverrides, for
temp data in asset code, etc.).
This commit aims at making this a bit more formal and defined, by:
* Adding a dedicated flag in Main struct to mark a Main as global.
* Adding some API to replace, or temporarily swap the current global
Main (`G_MAIN`) by another one.
NOTE: Having to temporarily replace `G_MAIN` is a workaround for the
limitation of current RNA, ideally this should be fixed in RNA itself,
but for now at least having an API helps tracking those cases (since
this is potentially risky operation).
This work is also a preparation for more usages of temp mains in the near
future (Asset Brushes and its presets system e.g. will most likely use
temp mains too).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15977
Was not passing user_data to id_override_library_delete_hierarchy_fn.
Also correct a wrong assert.
Greenlit by @mont29 in T101306.
Should also go into 3.3 LTS.
Saving non app-template preferences would use add-ons and other
app-template settings to write the default preferences if there was no
existing user preferences file saved.
Suppress warning when saving app-template preferences.
Check if the preferences exist before attempting to read them,
while harmless it looked as if something went wrong.
- Document the behavior of app-template IO for preferences.
- Add doxy-sections for each kind of blend file IO.
- Clarify BKE_blender_userdef_app_template_data_swap doc-string.
Add function `SEQ_time_content_end_frame_get` to get content end frame.
New function is shorthand for
`SEQ_time_start_frame_get() + SEQ_time_strip_length_get()`.
This versioning needs to be done after linking in order to affect
animation data which might not be loaded in the regular "do_versions"
loop. Animation data is removed in `nodeRemoveNode`.
Fixes T101439
On GCC, the loops created by `BLI_VEC_OP_IMPL` were not always
unrolled, leading to branching. For `attribute_math::mix4<float3>`,
this lead to a significant performance regression compared to its
older `interp_v3_v3v3v3v3` counterpart.
Instead of a using macros to create the for loops, use variadic
templates to manually unroll them. The compiler might do it anyway
(I didn't observe any effect on Clang in my tests), but there should
be no reason not to unroll these small loops, and making it explicit
and removing use of macros seems better.
On a Ryzen 3700x, this commits doubles the performance of Catmull
Rom curve position evaluation (from 18-19ms to around 9-10ms).
Differential Revision: https://developer.blender.org/D16136
After rB188f7585a183 deleting the object results in crash due
to null pointer access if collections are filtered out
Reviewed by: mont29
Differential Revision: https://developer.blender.org/D16031
