Changes:
- Add Vert Slide and Edge Slide to 'UV -> Transform' menu.
- Add a separator for Vert Slide and Edge Slide in the context menu.
- Don't display the "Correct UVs" option in the Redo menu of UV Editor.
EEVEE-Next performes less on integrated GPUs then discrete GPUs.
Most shaders have been analyzed, but there will always be bottlenecks
related to architectural differences.
In order to make EEVEE-Next run smooth on integrated GPUs this change
will implement viewport pixel size option similar to Cycles. The main difference
is that the samples will still be weighted and up-sampled to the final film
resolution. This makes the pixels not look squared in the viewport but will
resolve to something close to the results without up-scaling.
This improves the performance especially on integrated GPUs. The improvement
for discrete GPUs are less noticeable. See here the stats when playing
`rain_restaurant.blend` back on a RAPHAEL_MENDOCINO iGPU.
| Pixel size | Frames per second |
|------------|-------------------|
| 1x | 0.25 FPS |
| 2x | 4.14 FPS |
| 4x | 6.90 FPS |
| 8x | 9.95 FPS |
Related to: #114597
See PR for some example images.
Pull Request: https://projects.blender.org/blender/blender/pulls/118903
We recently added a new "Internet" icon, meant to represent internet
services and protocols generally, in contrast with the existing "url"
icon which can be seen as being http (web link) specifically. This
PR just uses this icon for cloud storage uses and for remote extension
repository.
Pull Request: https://projects.blender.org/blender/blender/pulls/119409
The core of the issue was that `sculpt_flag` was used by three different enums (`eGP_Sculpt_Flag`, `eGP_Sculpt_Mode_Flag`, and `eBrushFlags`). This resulted in the flag getting overriden because `ENUM_OPERATORS` expected the maximum value of `eGP_Sculpt_Flag` to be `(1 << 3)` which it wasn't.
The `sculpt_flag` was exposed through python as `"direction"`.
In the UI this meant that it was effectively used as `brush.direction`. This fix replaces `brush.gpencil_settings.direction` with `brush.direction`.
It also makes sure `sculpt_flag` is only ever used with values from `eGP_Sculpt_Flag`.
Pull Request: https://projects.blender.org/blender/blender/pulls/119373
This commit adds the `SCULPT_OT_hide_show_lasso_gesture` and the
corresponding Lasso Hide tool.
* Exposes the selection type for both the lasso and box hide tools
as a option in the header
* Adds functionality into `sculpt_gesture.cc` for handling lasso
selections with the `Outside` selection type
For `SelectionType::Outside`, the current implementation opts to not
do any filtering on the PBVH node level due to cases where the node
is mostly covered by a single gesture.
Addresses one of the tools in #80390
Pull Request: https://projects.blender.org/blender/blender/pulls/119140
Adds copy and paste images functionality to and from the image editor
in Linux/Wayland clipboard.
Currently the only format supported is PNG.
Ref: !119117
As part of #118623, we discovered that the operator used for adding images in the 3D viewport was not the same when drag and dropping as when adding it from the add menu. This lead to different and potentially confusing behaviour for the user when they use both.
This patch removes the python operator and unifies the functionality into one operator. It also renames the operator to be in line with the other "Add X" object operators.
Pull Request: https://projects.blender.org/blender/blender/pulls/118973
Add two snapping increment options: a regular value
(activated with Ctrl) and a precise value (activated with Ctrl+Shift).
These values are separate for 2D and 3D views.
Ref !118760
Allow some View3D buttons to change their width according to content
and Text Styles, rather than be fixed amount of UI_UNIT_X. Examples
include "Object Mode", "Transform Orientation", "Grease Pencil Layers",
"Texture Slots", "Vertex Groups", "Attribute", etc.
Pull Request: https://projects.blender.org/blender/blender/pulls/119223
This PR migrates the existing `PAINT_OT_hide_show` operator to the
previously extracted `gesture` namespace performed in #118881
The current operator has support for choosing whether the hide / show
action is performed on every vertex inside or outside the selection
area. This has been added to the common gesture functionality too,
but no common operator property has been exposed for it for the other
Lasso / Box tools to use.
Other modes of the current "hide_show" operator have been split
into separate operators: `PAINT_OT_hide_show_all` and
`PAINT_OT_hide_show_masked`.
Prerequisite for #80390
Pull Request: https://projects.blender.org/blender/blender/pulls/119040
This PR implements the Copy and Paste operators for GPv3. The operators
are available in Edit Mode. The Copy operator copies the selected strokes/
points to a clipboard. The Paste operator pastes the strokes/points from
the clipboard to the active layer.
Keyboard shortcuts:
- `Ctrl`-`C` for copy
- `Ctrl`-`V` for paste
- `Ctrl`-`Shift`-`V` for paste in the back (behind all existing strokes)
Pull Request: https://projects.blender.org/blender/blender/pulls/114145
Add label to the sculpt symmetrize options.
With no label user may confuse if other symmetry options
above are related to the symmetrize operation.
Also reorder them so the actual operation button to go bottom.
Pull Request: https://projects.blender.org/blender/blender/pulls/112915
Add percentage closer filtering to shadowmap sampling and a
`shadow_filter_radius` property to lights to control it.
Notes:
* This adds PCF to `eevee_shadow_tracing_lib`, but not to
`eevee_shadow_lib`, which is used by volumes (not required) and
thickness.
* PCF is computed based on the LOD0 size. This assumes that higher
LODs are only used when the shadowmap resolution is actually good
enough to match the render resolution.
Pull Request: https://projects.blender.org/blender/blender/pulls/118220
Pose-mode selection tools (box, lasso & circle select) now support
pose-mode when weight-painting.
Changes to the key-map [0] caused a regression where it was no longer
possible to select multiple bones because Shift-LMB is now used for
painting. The report #114981 proposes to support pose selection tools
in weight paint mode.
Note that in [1] added the tweak tool, this completes the change by
supporting other tools & fixing W-key shortcut access.
Resolves#114981.
[0]: 6de6d7267f
[1]: edcac1f48b
Adds two nodes as "grid" equivalents to the existing volume nodes:
- **Grid to Mesh**
- **Distribute Points in Grid**
The code for the latter is just duplicated for now. In a later step
old node can be replaced by versioning with two new nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/118830
Armature deformation modifier for Grease Pencil v3.
Changes compared to GPv2:
- `multi` DNA field was unused and was removed.
- `vert_coords_prev` array is unused and was removed (gets passed to
armature functions but never gets allocated).
- GPv3 modifier uses the common `influence` struct to store the vertex
group name, for consistency. The
`GREASE_PENCIL_INFLUENCE_INVERT_VERTEX_GROUP` flag is copied to
`deformflag` as `ARM_DEF_INVERT_VGROUP` before evaluation, which is
used internally by armature functions.
- `BKE_armature_deform_coords_with_curves` is added as another variant
of the deform function, but uses C++ parameter types (spans instead
of raw pointers). It gets a `Span<MDeformVert>` directly instead of
deducing it internally from the object type. This is because we want
to do this curve-by-curve and already use arbitrary vector spans for
positions.
Pull Request: https://projects.blender.org/blender/blender/pulls/118752
This is a migration of the current Line Art modifier to GPv3.
Note:
- The modifier is using the exact same DNA structure as the old one, it's re-defined in a different name. At the moment all the variable names and placement after the `ModifierData` part should stay exactly the same until we do proper versioning of the modifier data and completely remove the GPv2 support.
- Vertex weight transfer feature no longer supports name initial matching ("group" used to match "group1","group2" etc). Now it will only transfer vertex weight from source vertex groups that has the exact same name as specified.
Pull Request: https://projects.blender.org/blender/blender/pulls/117028
- Remove name from "Add Remote Repository" popup,
the name is set automatically based on the host-name.
- URL text field is active for new remote repositories,
the name field is active for local repositories.
- When the custom-path is disabled, show the automatically created
directory name which is used.
- Use the host-name for the repository name when version patching
user preferences.
Resolves#118638 design task.
This simple node finds the values of a volume grid at
positions in the local space used in geometry nodes
evaluation. There are three interpolation modes to
choose how to mix values between neighboring voxels.
For the implementation, first the values are sampled
with the grid's type directly, then implicit type conversions
are used to get the final type. This makes gives us flexibility
in case there aren't exact matches in support between grid
types and Blender types.
Pull Request: https://projects.blender.org/blender/blender/pulls/118397
Add this data as a layer attribute. It's usage was already implemented
by the modifier filtering generic code, but data itself did not yet
exist in GPv3 data.
Also add RNA accessors and handle it in conversion code.
Pull Request: https://projects.blender.org/blender/blender/pulls/118495
