We had a short discussion on this change. "Grease Pencil Layer" is
just a bit too long, especially in the UI. Even though "Layer" might be
ambiguous, it shouldn't be in the context of geometry nodes. There are
currently no other "Layers" and if there were, using the same domain
name could be fine (just like we reuse the point domain for e.g. vertices
in meshes and control points in curves).
This also renames the internal enum to `ATTR_DOMAIN_LAYER`
Pull Request: https://projects.blender.org/blender/blender/pulls/113589
This implements the core changes for this design: https://devtalk.blender.org/t/grease-pencil-integration-into-geometry-nodes/31220
The changes include:
* Add `CustomData` for layer attributes
* Add attribute support for the `GreasePencilComponent` to read/write layer attributes. Also introduces a `Layer` domain.
* Implement a `GreasePencilLayerFieldContext` and make `GeometryFieldContext` work with grease pencil layers.
* Implement `Set Position` node for `Grease Pencil`.
Note: These changes are only accessible/visible with the `Grease Pencil 3.0` experimental flag enabled.
Co-authored-by: Jacques Lucke <jacques@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/112535
Now that specific menus can be searched directly (see 7f9d51853c),
there is no need to maintain separate search functionality for adding
nodes. This PR removes the add node search. In a way this brings us
closer to the `NodeItem` situation before, but the setup is more
flexible since the menus are more standard and easier to customize.
In the few ways we customized the node search items before, this gives
us the same results as before. Overall the searching is less flexible,
but I think that is just a tradeoff we have to accept for the simplicity
of searching menus. In the future menus could be made more dynamic,
with each builtin node's menu path stored on the node type, similar to
assets. That might be a nice compromise. In the meantime this code
is just dead weight.
Pull Request: https://projects.blender.org/blender/blender/pulls/112056
This commit disambiguates the following messages:
- Sequencer effect strip types: use "Sequence" context in relevant
places, as that is already extracted as part of the
`sequencer_prop_effect_types` enum, and more specific.
- "Language" (a natural or programming language)
- "Flat" (gender)
- "Smooth" (action or amount -- very partial disambiguation for now
because this is all over the place)
It also extracts these messages:
- Newly created Freestyle data
- LineStyle
- LineSet
- Modifiers
- "Registering panel class:" error message from RNA registration
- "Node must be run as tool" error message from tool geometry nodes
Ref #43295
Pull Request: https://projects.blender.org/blender/blender/pulls/111146
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Add three new nodes for operations and inputs specific to
node group operators.
- **Selection** Whether elements are selected in the viewport
- **Set Selection** Sets the edit/sculpt selection, on the point,
face, or curve domains
- **3D Cursor** Gives the location and rotation of the 3D cursor,
in the local space of the modified object.
- **Face Set** The face set value from mesh sculpt mode,
and whether the attribute exists.
- **Set Face Set** Set sculpt face set values.
In the add menu and search, the nodes are only visible in the
"Tool" context of the geometry node editor. They also give
errors when executed by a modifier.
Pull Request: https://projects.blender.org/blender/blender/pulls/109517
Add a quaternion rotation socket type, and using the recently added
rotation attribute type, support the type in most of the multi-type
geometry nodes, and modifier attribute inputs and outputs.
The socket is still exposed with an XYZ Euler default value.
In the future we can add modes to this rotation value similar
to object rotations.
Rotation values have no implicit conversions to other types.
Nodes to convert to and from rotation values will be added
in a follow-up commit.
For now, the new socket type is hidden behind and experimental
option, because we haven't chosen the final color for it yet.
Pull Request: https://projects.blender.org/blender/blender/pulls/108903
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
Refactoring mesh code, it has become clear that local cleanups and
simplifications are limited by the need to keep a C public API for
mesh functions. This change makes code more obvious and makes further
refactoring much easier.
- Add a new `BKE_mesh.hh` header for a C++ only mesh API
- Introduce a new `blender::bke::mesh` namespace, documented here:
https://wiki.blender.org/wiki/Source/Objects/Mesh#Namespaces
- Move some functions to the new namespace, cleaning up their arguments
- Move code to `Array` and `float3` where necessary to use the new API
- Define existing inline mesh data access functions to the new header
- Keep some C API functions where necessary because of RNA
- Move all C++ files to use the new header, which includes the old one
In the future it may make sense to split up `BKE_mesh.hh` more, but for
now keeping the same name as the existing header keeps things simple.
Pull Request: https://projects.blender.org/blender/blender/pulls/105416
Add a per node type callback for creating node add search operations,
similar to the way link drag search is implemented (11be151d58).
Currently the searchable strings have to be separate items in the list.
In a separate step, we can look into adding invisible searchable text
to search items if that's still necessary.
Resolves#102118
Pull Request #104794
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This flag is only used a few small cases, so instead
of setting the flag for every node only set the
required flag for the nodes that require it.
Mostly the flag is used to set `ntype.flag = NODE_PREVIEW`
For nodes that should have previews by default which
is only some compositor nodes and some texture nodes.
The frame node also sets the `NODE_BACKGROUND` flag.
All other nodes were setting a flag of 0 which has no purpose.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D13699
This commit adds a search menu when links are dragged above empty
space. When releasing the drag, a menu displays all compatible
sockets with the source link. The "main" sockets (usually the first)
are weighted above other sockets in the search, so they appear first
when you type the name of the node.
A few special operators for creating a reroute or a group input node
are also added to the search.
Translation is started after choosing a node so it can be placed
quickly, since users would likely adjust the position after anyway.
A small "+" is displayed next to the cursor to give a hint about this.
Further improvements are possible after this first iteration:
- Support custom node trees.
- Better drawing of items in the search menu.
- Potential tweaks to filtering of items, depending on user feedback.
Thanks to Juanfran Matheu for developing an initial patch.
Differential Revision: https://developer.blender.org/D8286
This was overlooked, as it seems there's no way for these strings to be
translated currently. Generally it's not that clear whether `N_` or
`TIP_` should be used in this case, but `TIP_` seems more consistent.
To avoid the cost of the translation lookup when the UI text isn't
necessary, we could allow the disabled hint argument to be optional.
Differential Revision: https://developer.blender.org/D13141
Previously, node types had a callback that creates internal links. Pretty
much all nodes used the same callback though. The exceptions are the
reroute node (which probably shouldn't be mutable anyway) and some
input/output nodes that are not mutable.
Removing the callback helps with D13246, because it makes it easier
to reason about which internal links are created and when they change.
In the future, the internal links should be part of the node declaration.
This cleans up part of the code that still set the flag manually. Also, this
change helps with D13246 because it makes it easier to tag the node
tree as changed when the availability of a socket changed.
Just like the way we often have a choice between an attribute input and
a single float, this adds the ability to choose between attribute and
integer input sockets, useful for D11421.
This is especially useful when trying to add a node group instance, e.g. via
drag & drop from the Outliner or Asset Browser.
Previously this would just silently fail, with no information why. This is a
source of confusion, e.g. earlier, it took me a moment to realize I was
dragging a node group into itself, which failed of course.
Blender should always try to help the user with useful error messages.
Adds error messages like: "Nesting a node group inside of itself is not
allowed", "Not a compositor node tree", etc.
Adds a disabled hint return argument to node and node tree polling functions.
On error the hint is reported, or could even be shown in advance (e.g. if
checked via an operator poll option).
Differential Revision: https://developer.blender.org/D10422
Reviewed by: Jacques Lucke
In an upcoming commit I'll also move the make-instances-real functionality
to this file. This code is not essential to working with geometry sets in general,
so it makes sense to move it to a separate header.
Currently every attribute node assumes that the attribute exists on the
"points" domain, so it generally isn't possible to work with attributes
on other domains like edges, polygons, and corners.
This commit adds a heuristic to each attribute node to determine the
correct domain for the result attribute. In general, it works like this:
- If the output attribute already exists, use that domain.
- Otherwise, use the highest priority domain of the input attributes.
- If none of the inputs are attributes, use the default domain (points).
For the implementation I abstracted the check a bit, but in each
node has a slightly different situation, so we end up with slightly
different `get_result_domain` functions in each node. I think this makes
sense, it keeps the code flexible and more easily understandable.
Note that we might eventually want to expose a domain drop-down to some
of the nodes. But that will be a separate discussion; this commit focuses
on making a more useful choice automatically.
Differential Revision: https://developer.blender.org/D10389
This commit makes the geometry output of the collection info usable.
The output is the geometry of a collection instance, but this commit
adds a utility to convert the instances to real geometry, used in the
background whenever it is needed, like copy on write.
The recursive nature of the "realize instances" code is essential,
because collection instances in the `InstancesComponent`, might have no
geometry sets of their own containing even more collection instances,
which might then contain object instances, etc.
Another consideration is that currently, every single instance contains
a reference to its data. This is inefficient since most of the time
there are many locations and only a few sets of unique data. So this
commit adds a `GeometryInstanceGroup` to support this future optimization.
The API for instances returns a vector of `GeometryInstanceGroup`.
This may be less efficient when there are many instances, but it makes
more complicated operations like point distribution that need to iterate
over input geometry multiple times much simpler.
Any code that needs to change data, like most of the attribute nodes,
can simply call `geometry_set_realize_instances(geometry_set)`,
which will move any geometry in the `InstancesComponent` to new "real"
geometry components.
Many nodes can support read-only access to instances in order to avoid
making them real, this will be addressed where needed in the near future.
Instances from the existing "dupli" system are not supported yet.
Differential Revision: https://developer.blender.org/D10327
This node updates the "rotation" attribute on points.
Multiple ways to specify the rotation are supported.
Differential Revision: https://developer.blender.org/D9883
Ref T83668.
This patch adds two related nodes, a node for separating points
and mesh vertices based on a boolean attribute input, and a node
for creating boolean attributes with comparisons.
See the differential for an example file and video.
Point Separate (T83059)
The output in both geometries is just point data, contained in the mesh
and point cloud components, depending which components had data in the
input geometry. Any points with the mask attribute set to true will be
moved from the first geometry output to the second. This means that
for meshes, all edge and face data will be removed. Any point domain
attributes are moved to the correct output geometry as well.
Attribute Compare (T83057)
The attribute compare does the "Equal" and "Not Equal" operations by
comparing vectors and colors based on their distance from each other.
For other operations, the comparison is between the lengths of the
vector inputs. In general, the highest complexity data type is used
for the operation, and a new function to determine that is added.
Differential Revision: https://developer.blender.org/D9876
This is a non-functional change. The functionality introduced in this commit
is not used in master yet. It is used by nodes that are being developed in
other branches though.
The handling of muted nodes is handled at the derived node tree
level now. This is also where expanding node groups is handled.
Muted nodes are relinked and removed from the derived tree
during construction. The geometry node evaluation code does
not have to know about muted nodes this way.
This is the initial merge from the geometry-nodes branch.
Nodes:
* Attribute Math
* Boolean
* Edge Split
* Float Compare
* Object Info
* Point Distribute
* Point Instance
* Random Attribute
* Random Float
* Subdivision Surface
* Transform
* Triangulate
It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier.
Notes on the Generic attribute access API
The API adds an indirection for attribute access. That has the following benefits:
* Most code does not have to care about how an attribute is stored internally.
This is mainly necessary, because we have to deal with "legacy" attributes
such as vertex weights and attributes that are embedded into other structs
such as vertex positions.
* When reading from an attribute, we generally don't care what domain the
attribute is stored on. So we want to abstract away the interpolation that
that adapts attributes from one domain to another domain (this is not
actually implemented yet).
Other possible improvements for later iterations include:
* Actually implement interpolation between domains.
* Don't use inheritance for the different attribute types. A single class for read
access and one for write access might be enough, because we know all the ways
in which attributes are stored internally. We don't want more different internal
structures in the future. On the contrary, ideally we can consolidate the different
storage formats in the future to reduce the need for this indirection.
* Remove the need for heap allocations when creating attribute accessors.
It includes commits from:
* Dalai Felinto
* Hans Goudey
* Jacques Lucke
* Léo Depoix
