This resolves some issues with correlation artifacts at higher sample counts.
Fix T101356, correlation issues in new PMJ pattern.
Differential Revision: https://developer.blender.org/D16561
Commit c8dd33f5a37b6a6db0b6950d24f9a7cff5ceb799 in OSL changed behavior of
parameters that reference each other and are also overwritten with an
instance value. This is causing the "NormalIn" parameter of a few OSL nodes
in Cycles to be set to zero somehow, which should instead have received the
value from a "node_geometry" node Cycles generates and connects automatically.
I am not entirely sure why that is happening, but these parameters are
superfluous anyway, since OSL already provides the necessary data in the
global variable "N". So this patch simply removes those parameters (which
mimics SVM, where these parameters do not exist either), which also fixes
the rendering artifacts that occured with recent OSL.
While this fixes built-in shader nodes, custom OSL scripts can still have
this problem.
Ref T101222
Differential Revision: https://developer.blender.org/D16470
For some pixels with transparent surfaces, no depth value would be written
when sampling chooses a reflection/refraction BSDF instead of transparent
BSDF. Now ensure we always write at some some depth value to the pass.
This is still not ideal as the resulting depth values are noisy same as they
are for depth of field and motion blur, but at least there should be no gaps.
This was previously needed due to poor compatibility between Visual Studio and
NVCC. But it has not been used for a while now as compatibility seems to have
improved.
This can be used for example for VR video formats that use this projection
instead of perspective projection for cubemap faces.
Differential Revision: https://developer.blender.org/D13525
Buildbot infrastructure relies on the fact that it can enable and
disable `WITH_CYCLES_<COMPUTE>_BINARIES` without affecting speed of
incremental builds. This allows buildbot to skip GPU kernels when
doing CI regression tests which do not need GPU kernels, as well as
it allows to move GPU kernels compilation to a separate step where
all the resources are available to the GPU kernel builders.
For the oneAPI compute enabling and disabling AoT kernels has much
higher implications due to the kernels being a part of the device
implementation from the build target perspective.
This change makes it so different target names are used for JIT and
AoT configurations, which allows CMake to more fully benefit from
"caching" the compiled result.
The end goal of this change is to make it so sequential build of the
same code base on the buildbot happens super fast,
Blender binary still needs to be re-linked when the AOT of oneAPI
option is toggled, but that's already the case in the buildbot due
to the WITH_BUILDINFO.
Differential Revision: https://developer.blender.org/D16312
Known Issues:
- Command buffer failures when using binary archives (binary archives is disabled for Intel GPUs as a workaround)
- Wrong texture sampler being applied (to be addressed in the future)
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D16253
Previously, a first build using ninja would throw "ninja: error:
'intern/cycles/kernel/cycles_kernel_oneapi.lib', needed by
'bin/blender.exe', missing and no known rule to make it".
MSVC Tools version doesn't match MSVC Redist version on some systems and
it's not populated when using Ninja outside of Visual Studio shell,
trying another way.
Test kernel will now test functionalities related to kernel execution
with USM memory allocations instead of with SYCL buffers and accessors
as these aren't currently used in the backend.
This change removes CMake code for automatic calculation of the number
of offline device compiler instances, to hand over control to developers
instead as it incurs a rather large memory usage with around 8GB per
instance at peak.
Use SYCL_OFFLINE_COMPILER_PARALLEL_JOBS CMake variable to configure it.
This patch enables MNEE on macOS >= 13. There was an inefficiency in the calculation of spill requirements, fixed as of macOS 13. This patch also adds a temporary inlining workaround for a Metal compiler bug which causes `mnee_compute_constraint_derivatives` to behave incorrectly.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16235
JIT compilation of oneAPI kernels now happens during load stage
and proper message gets shown in the GUI during compilation.
Also, this implementation skips kernels that aren't needed for
the used scene, reducing overall (re)compilation time.
It fixes SYCL runtime issues in Debug builds that were due to mixing
Release and Debug MSVC runtimes.
This commit also removes specific handling of dpcpp compiler executable
to simplify the CMake implementation. Using it like clang++ works and
clang++ executable is also available from Intel oneAPI DPC++ compiler in
case it doesn't.
This is a minimal set of changes, allowing a lot of cleanup that can
happen afterward as it allows sycl method and objects to be used outside
of kernel.cpp.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D15397
Changing volume parameters during rendering could cause a crash
when guiding was enabled. It was due to an unintialized state paramter
at the beginning of the path tracing process.
In addition guiding is disabled when dealing with almost delta volumes
(i.e., g close to 1.0 or -1.0).
This change speeds up the compilation at the cost of higher memory usage.
CMake implementation checks the amount of available memory to spawn a
reasonable number of parallel compiler jobs.
Previously it would bake viewed from above the surface. The new option can be
useful when the baked result is meant to be viewed from a fixed viewpoint or
with limited camera motion.
Some effort is made to give a continuous reflection on parts of the surface
invisible to the camera, but this is necessarily only a rough approximation.
Differential Revision: https://developer.blender.org/D15921
This patch optimises the Metal inlining policy. It gives a small speedup (2-3% on M1 Max) with no notable compilation slowdown vs what is already in master. Previously noted compilation slowdowns (as reported in T100102) were caused by forcing inlining for `ccl_device`, but we get better rendering perf by relying on compiler heuristics in these cases.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16081
This adds path guiding features into Cycles by integrating Intel's Open Path
Guiding Library. It can be enabled in the Sampling > Path Guiding panel in the
render properties.
This feature helps reduce noise in scenes where finding a path to light is
difficult for regular path tracing.
The current implementation supports guiding directional sampling decisions on
surfaces, when the material contains a least one diffuse component, and in
volumes with isotropic and anisotropic Henyey-Greenstein phase functions.
On surfaces, the guided sampling decision is proportional to the product of
the incident radiance and the normal-oriented cosine lobe and in volumes it
is proportional to the product of the incident radiance and the phase function.
The incident radiance field of a scene is learned and updated during rendering
after each per-frame rendering iteration/progression.
At the moment, path guiding is only supported by the CPU backend. Support for
GPU backends will be added in future versions of OpenPGL.
Ref T92571
Differential Revision: https://developer.blender.org/D15286
Simplifies code overall to do it inside the eval function, most of the BSDFs
already compute the dot product.
The refactoring in bsdf_principled_hair_eval() was needed to avoid a HIP
compiler bug. Cause is unclear, just changing the implementation enough
is meant to sidestep it.
Ref T92571, D15286
* Return roughness and IOR for BSDF sampling
* Add functions to query IOR and label for given BSDF
* Default IOR to 1.0 instead of 0.0 for BSDFs that don't use it
* Ensure pdf >= 0.0 in case of numerical precision issues
Ref T92571, D15286
Windows drivers 101.3430 fix an important GUI-related crash and it's
best to prevent users from running into it.
Linux drivers weren't affected but still had relevant gpu binary
compatibility fixes, so it makes sense to keep the min-supported version
aligned across OSes.
This is already the case for most CMake usage.
Although some find modules are an exception to this, as they were
originally maintained externally they use some different conventions.
Also corrected bad indentation in: intern/cycles/CMakeLists.txt
Now explicitly including math.h first before #defining funcitons.
This avoids undefined behavior and improves compatibility with
different SYCL compilers and backends.
Cleans up the file structure to be more similar to that of the SVM
and also makes it possible to build kernels with OSL support, but
without having to include SVM support.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15949
This has the advantage of being able to use information about the
existing OSL closures in various places without code duplication. In
addition, the setup code for all closures was moved to standalone
functions to avoid usage of virtual function calls in preparation for GPU
support.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15917
The SVM attribute map is always generated and uses a simple
linear search to lookup by an opaque ID, so can reuse that for OSL
as well and simply use the attribute name hash as ID instead of
generating a unique value separately. This works for both object
and geometry attributes since the SVM attribute map already
stores both. Simplifies code somewhat and reduces memory
usage slightly.
This patch was split from D15902.
Differential Revision: https://developer.blender.org/D15918
